How to Paint Plywood Using Water Based Paint | Beginner's Guide
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- This video is about the plywood painting process using water based paint. Step by step process from paint preparation to finishing which will be very helpful specially to beginner woodworkers.
Share this video
• How to Paint Plywood U...
#waterbasedpaint #plywoodpaintingprocess #plywoodfinishing #diyprojects
Since this is a beginner's guide to painting it would be better to list down all the materials used; tools used then the step-by-step procedure like 1) sanding 2) applying primer 3) applying putty 4) sanding 5) applying primer 6) sanding 7) applying final paint so the viewer can better follow what you're doing based on the written step by step procedure. That would be a better guide.
Hi! Thanks for your feedback. You're suggestion is highly appreciated.
I'm looking forward to seeing that guys video, he's such a critic I've no doubt it'll be amazing!
Thank you, this was very helpful
Very thorough! Lovely job.
Thanks for this thoroughly explanatory video... made me realise im not a beginner... ( thought i was) but initially i was thinking how many coats etc... but pleased to see the end result was epic...
Only a slight tiny criticism... music a teeny bit too loud...perfect track though🙂
Why switch from random orbital sander for bare wood to pad sander for primed surface?
Thanks, good advice here for a niche project of mine. Thank you for explaining so thoroughly.
Hello, I see that the video doesn't zoom into the actual painted surface so I'm not sure if the "leathery" texture is still there much like what we usually encounter in my shop. I was going to ask how you can remove the seemingly impossible to remove "leathery" texture. Please help.
Hello, use a short pile roller.... this here was too fluffy, and the paint too thickly applied too.
is masonary paint any good to paint plywood with.
I want to use water based on wood but keep the texture of couse can not be clear like woodstain but keep the matte texture after 1 or 2 coat is it possible please make a vidieo
You can definitely achieve that by using water based matte finish topcoat. Let’s see if I can squeeze in a video regarding that, it’s a quite a good topic anyway. Thanks for your comment
@@arkowoodworks4510 i am so into it but need one to follow thank for confirm
Ok ln po ba gumamitng pollituf na body filler for big holes jan sa water based?
I really liked your process I'm living in Bangladesh and needed to see a process that can be done in 1 day and the paint materials that is available/possible in our region,
I wanted to know can I use a spray gun instead of the roller and will the drying time be the same if I use enamel paint?
Can I speed up the drying process if I leave the painted piece under a ceiling fan?
Hi Rana! Thanks for appreciation.
To answer your question, if you have a spray gun you can definitely use it instead of paint roller. Application will be faster as well as the drying time since spray paint applies thinner layer of paint.
Humidity and temperature are the two factors for quicker drying time. Higher temperature and low humidity will speed up drying time. Using fan will certainly help, just make sure the surroundings are dust free to prevent it from landing on the painted pieces.
What brand of wood putty did you used?
Hi i used ABC Gypsum Putty.
I guess I don’t understand why you apply wood putty after the first coat of primer and not before, and why use so much? Feels like a lot of extra sanding and effort to level all of that.
To have a smooth level. The first coat makes it easier to spot imperfections. If you sand with first coat you can't see imperfections properly
What primer did you use ?
I used TimberPrime wood primer by Davies
ok dn b un epoxy primer idol
Poor.... The use of a thick pile roller, instead of a short pile.... will leave this leathery, coarse finish, the top coat was much " too thickly " applied.
Don't do it like this, if you want a nice finish.
what kind of putty did you use ? tfs
What I want to know
Sir pwd rn b same preparation nyan kng hardiflex cementboard ang surface 😊?
Process wise, almost the same but usually pag hardiflex kailangan maunang batakan and syempre ibang primer and paint gagamitin.
Very informative video with clear instruction. What filler would you use for the gaps in the edges of the plywood?
Thanks! For the plywood edges I actually use the same gypsum putty. It does pretty well in covering edges.
@@arkowoodworks4510 Many Thanks for the info.
bawal po ba after ng primer, final paint na po?
Pwede naman but yung quality ng paint finish hindi ganun kaganda
thankyou!
Where are you from
Hi I am from Manila Philippines 🇵🇭
@@arkowoodworks4510 Brother, if I want to get white color painted on the doors, then which one will be right matte finish paint or glossy finish paint. Which would look beautiful?
@@vishalthakur1970 for the door I think glossy finish is much of an eye appealing than matte finish.
Music sucks