FULL THROTTLE FILMZ it still runs but the motor needs some love , it now starting to give me problems staying running or has a lean bog but I think I got the carb cleaned and adjusted right to keep her running a bit longer till I can get the money for a rebuild cuz I gotta hav the crank pressed
hey man I know I'm pretty late to the party, but I'm actually about to tackle an engine build on my own yz450f and I was wondering what specific tools will I need to make sure to have? (i.e.-torque wrench ranging from xx-xx ft/lbs, feeler guages (metric or sae, digital caliper, ring compressor, etc.) If you see this, I would really appreciate the help!!
You should maybe put some silicone on that valve cover gasket, where are those ”half moon” things. Lot of ktm s have started to leak when they have checked those valves and forgot to put some extra silicon there
It may not be an issue on those yamahas, but if u open it after break in, it may start leaking, and that is soo annoying when the oil gets everywhere :D
Man how do you get to this level of expertise? Bring able to rebuild every part or a bike, every engine bearing, forks, brakes, everything! I'm super interested since I'd love to get into this stuff
Cyrus Goulter i learned the basics from a friend then just taught myself how to do damn near everything by watching TH-cam videos, reading online and using shop manuals and then just going for it!
It was set wrong, then turned over to check, then we repositioned the cams off camera. Bike has been going 10 hrs strong now runs like a top. Good catch bud
hgfb Schuit yup, someone already fried my ass for this. We didn’t have a 450 hone and the mechanic said this would work. Won’t do it again. Welcome to México and me not having experts here to teach me everything
@@FULLTHROTTLEFILMZ oh okay. good to see that you have learned from it! thanks for the reply. it really shows that you are a guy who wants to do it well! keep up the good work! the bike is looking really dope already!
sanding the cyl might be the dumbest thing I've seen... steel valves without stiffer springs? no loctite on cam chain guide bolt? washing the head while its fully assembled ? why why???? people may know how to put these engines together, but that doesn't mean its gonna be done right.... this engine was built so backwards but it does look sick. hope it lasts
Nate Bennett first of, I literally explain in the beginning of the video that I changed the valve springs, they are the kibblewhite springs meant for the stainless steel valves. Nothing was built backwards.. yeh i washed the head because i again replaced all the internals so whats the problem? Loctite? Man its going to be fine. Listen this is mexico we don’t always do shit 100% by the book because we can’t, we make it work. I promise you this engine will last and is going to be a beast. Thanks for expressing your concerns. Hope u like the build at least
@@FULLTHROTTLEFILMZ idk man the grit off that sandpaper is imbedded in the nikasil now, compression will go down in abt 20-30 hrs. listen i build motors for a living. im just trying to give advice
Nate Bennett yeah I am listening and all I can say is we didn’t have a 450 size hone to do the cylinder so we used a super fine grit and I personally did NOT see any grit left behind on the cylinder plating. I’m sure you’re right but I did the best job I could. Thanks for explaining more. I’m no pro and don’t claim to be one.
@@FULLTHROTTLEFILMZ no yea man its all good, i just hate seeing people make mistakes like that cause more often than not they'll come back to bite ya! haha. but yea typically you won't see it, especially a super fine grit, but sandpaper isn't meant for that and the grit does lodge itself in the cyl, not to mention its very hard to get a even uniform hone with that method.
Who was waiting for this one??
👍👍
!!!!
FULL THROTTLE FILMZ 🙋🏼♀️
1st vid since i subbed off your CR vid.....good stuff!
You already know bro
Insane bike. You made sure of the durability of the valves for the new purpose of the bike ❤ lit ☀
Joseph Celicious thanks a lot man! The new valves should definitely last a long time 👍🏼
Hell yes!!!!!!!!!! This is only channel i pressed bell, your big fan from thailand❤️
Much love ❤️ thank you from Mexico!
Holy shit this video got me excited 🤤 gives a new meaning to "bike build"
HadrienATF haha that’s what I like to hear my dawg!! Thank you 🙏🏻
Insane!!! Proud of you brother, it's looking killer!, can't wait to see her all done, and those graphics 👀🔥
Ulises Glez always appreciate it bro, it will be one to remember when it’s all done. I promise the graphics going to pull the whole bike together 👌🏻
Hell yeah bro!
Dope vid cant wait until the bike is complete!!!
Louis Mills thanks a lot! Neither can I! Haha 😆
You're nailing all of the details. Good work. Throwing in the graphics design was pretty dope too👌
I appreciate it man! I thought it would be interesting to show how graphics get designed, glad you enjoyed that 👍
Bro. You went full send with this build. Stoked.
Thank you sir 👍🏼 i appreciate it! Stay tuned it’s going to be ripping very soon!
Dude this is gonna be so sick. Them graphics look unreal really gonna set this the bike off. Stoked to see this finished 🤙
Tomatoknuckles you know it! Not much longer now bro 🤟🏼 thank you for the comment
I can't wait for see her!
Not much longer now!!
seriously good episode . just the right length too
Scurry thanks a lot man! This one came out sweet 👍🏼
You totaly managed to make this engine into something else :D The bike will look sick !
You make me wanna do a four stroke bulind next :P
gnagsaar moto thanks again man! Yeh four stroke build is pretty fun! Do it after the 500! Haha 😆
Man that engine is looking🔥🍭 You’ve put so much work and🤑 in it😧🙌
Thank you bro! Yeh so much work and money 😓 but this bike will be so amazing for the winner 👍🏼
Killed it!
Jukehz thanks a lot bro! Straight love went into this one ☝🏻
There is so much wish watching this thing get built it’s looking better that my 99 wr400f super moto.. and it’s getting harder to find parts
Kyler Skidmore hey man you got a classic so parts might be harder to find but don’t give up on it that thing can run forever!
FULL THROTTLE FILMZ it still runs but the motor needs some love , it now starting to give me problems staying running or has a lean bog but I think I got the carb cleaned and adjusted right to keep her running a bit longer till I can get the money for a rebuild cuz I gotta hav the crank pressed
Nice job, looks awesome, and welcome to Monterrey
Raul Ramirez thanks a lot! I love it here 👍🏼
@@FULLTHROTTLEFILMZ Cool, hope someday we met.
hey man I know I'm pretty late to the party, but I'm actually about to tackle an engine build on my own yz450f and I was wondering what specific tools will I need to make sure to have? (i.e.-torque wrench ranging from xx-xx ft/lbs, feeler guages (metric or sae, digital caliper, ring compressor, etc.) If you see this, I would really appreciate the help!!
Clean Build bro!!!
Thank you I appreciate it 👍🏼
You out of the Monterrey area , if so I live on the border town by Piedras Negras maybe one day we catch a ride man .🤟🏻
Hell yeh man! I have been through there before. That would be awesome 👍🏼
That's the flattest piston I ever saw haha, this is the first time I see YZ450F piston
Yeh this thing was Flat! Sure was a beauty though, JE makes a quality piston.
Muy fino trabajando el motor
Muchas gracias 👌🏻
Oh i was not exceptimg that u change all those bearings lol 😂 gj man
Topi Metso went all out had to do it 100% right, will explain later! Thanks a lot!
You should maybe put some silicone on that valve cover gasket, where are those ”half moon” things. Lot of ktm s have started to leak when they have checked those valves and forgot to put some extra silicon there
It may not be an issue on those yamahas, but if u open it after break in, it may start leaking, and that is soo annoying when the oil gets everywhere :D
Great ,Very good
Urubus da Serra thank you 🙏🏻 it is appreciated
Looks awesome 💯🤘🇫🇷
Thank you so much!
@@FULLTHROTTLEFILMZ you are welcome m'y dude🤘🤘
Maybe carbon decals? Cant wait to see graphics
Onn bike
Matiss Meinards maybe that could be cool! Thanks man 👍🏼
Is asome the video!
Clemente Lara thank you!
Wow that's going to be a nice build how can we enter the raffle
Dirt Bikes with Michael Thanks a lot! I will be posting all the info about the raffle soon 👍🏼
OMG🔥🔥
Thank you!
Man how do you get to this level of expertise? Bring able to rebuild every part or a bike, every engine bearing, forks, brakes, everything! I'm super interested since I'd love to get into this stuff
Cyrus Goulter i learned the basics from a friend then just taught myself how to do damn near everything by watching TH-cam videos, reading online and using shop manuals and then just going for it!
Lit bro
🔥
F*ck yeah menn awesome 😍i love this bike all crazy men thx for this content 💪💪
sFk Silent haha heck yeh man!! You are welcome!
Fuckin sick dude
Hey I have a YFZ 450 F in the kickstand got stuck in neutral what that means
Maybe something broken in the transmission
What app you use for create a graphics?
I had a company Moto X Decal design them
Give as a quick videos im exacted for this bike 😛
Did something fail, What made you want to rebuild? Looked at my manual today it said rebuild at 12 hrs wtf 😳
This engine had been rebuilt once before already and in total had 205 hours on it. Now it’s going to run another 100+ hrs
new yamahas are only 4 valved?
I believe the all the 450s are but I can't say for the 250s... Anyone else know?
When is it ready?
Just a few more weeks hopefully.
cradible 😂🤣
😍
How do you put in for the raffle
It will all be done through JAX Moto here in Monterrey, Mexico. More details coming soon.
Nice build man. Dm-ed you on IG
cJ delos santos thanks a lot bro 👍🏼
@@FULLTHROTTLEFILMZ thank you, too bro 😎
Piston this is diameter...?
Hahaha maksudnya berapa ukuran piston?
@@rendybungsu5103 iya broo 😂😂
Ada yg dari indonesia
ada
@@muhammadhopi8505 mantap haha
He set the timing on that intirly to rong
It was set wrong, then turned over to check, then we repositioned the cams off camera. Bike has been going 10 hrs strong now runs like a top. Good catch bud
WTF ARE YOU DOING MAN
THE BORE WAS GOOD HAD GOOD HONING MARKS AND ALL AND YOU START HAND SANDING IT WITH SANDPAPER WTF
hgfb Schuit yup, someone already fried my ass for this. We didn’t have a 450 hone and the mechanic said this would work. Won’t do it again. Welcome to México and me not having experts here to teach me everything
@@FULLTHROTTLEFILMZ oh okay. good to see that you have learned from it! thanks for the reply. it really shows that you are a guy who wants to do it well! keep up the good work! the bike is looking really dope already!
@@FULLTHROTTLEFILMZ plus your reply just pushed me to subscribe to you! looking forward to more of your vids💪
hgfb Schuit thanks a lot I appreciate it 👍🏼
sanding the cyl might be the dumbest thing I've seen... steel valves without stiffer springs? no loctite on cam chain guide bolt? washing the head while its fully assembled ? why why???? people may know how to put these engines together, but that doesn't mean its gonna be done right.... this engine was built so backwards but it does look sick. hope it lasts
Nate Bennett first of, I literally explain in the beginning of the video that I changed the valve springs, they are the kibblewhite springs meant for the stainless steel valves. Nothing was built backwards.. yeh i washed the head because i again replaced all the internals so whats the problem? Loctite? Man its going to be fine. Listen this is mexico we don’t always do shit 100% by the book because we can’t, we make it work. I promise you this engine will last and is going to be a beast. Thanks for expressing your concerns. Hope u like the build at least
@@FULLTHROTTLEFILMZ idk man the grit off that sandpaper is imbedded in the nikasil now, compression will go down in abt 20-30 hrs. listen i build motors for a living. im just trying to give advice
Nate Bennett yeah I am listening and all I can say is we didn’t have a 450 size hone to do the cylinder so we used a super fine grit and I personally did NOT see any grit left behind on the cylinder plating. I’m sure you’re right but I did the best job I could. Thanks for explaining more. I’m no pro and don’t claim to be one.
@@FULLTHROTTLEFILMZ no yea man its all good, i just hate seeing people make mistakes like that cause more often than not they'll come back to bite ya! haha. but yea typically you won't see it, especially a super fine grit, but sandpaper isn't meant for that and the grit does lodge itself in the cyl, not to mention its very hard to get a even uniform hone with that method.
Nate Bennett fair enough well thanks for passing that on I really had no idea that it was a big problem. Now I know right
first 4 stroke you did not complete shop handled topend, disappointment.
sam samson hey you’re back! Haha and sounds like you watched the entire video! 👍🏼 thanks bro!
@@FULLTHROTTLEFILMZ odd take on what i said. your putting to much effort in to being responsive. and will burn out.
You ruin surface treatment on the titaniun valve by lapping them
juliandp these are kibblewhite stainless steel valves, thanks for the info tho 👍🏼
@@FULLTHROTTLEFILMZ dontcha just love it when the know-it-all comments dont-know-shit!