Fixing a solid red light error on an Odyssey garage door by resetting the limits.

[@kims1444]

This fixed my problem! Was ready to buy a new board as I was sure that was the problem with my opener since the issue appeared right after a momentary power failure. Figuring resetting limits on the door was easier than pulling the board, I gave this a try and it resolved the issue! Saved a lot of time, headaches and almost $200 for a new board. Thanks for the video!

[@HandsomeOrHandy]

Glad it helped!

[@AndTodaysProjectIs]

Yep, even though my model is completely different from yours you saved me a headache tonight. I didn't realize that you had to set and save the two different directions individually

[@DanielleRoper-s9z]

Thank you for this weeks without parking the garage. And such an easy fix!!

[@harrisons7873]

Perfect! This worked for my Genie Garage Door as well! Same problem, same buttons, same fix. Thank you!

[@HandsomeOrHandy]

Glad it helped!

[@saracheney]

Your video was really good. I fix my garage door because of your video. Thank you very much.

[@hnl.propertyrenovations3011]

Thank you. I was having problems with my genie door . I tried everything. Untill I see your video. It 😅was such a relief. Well I should read the instructions. Instead of thinking I can do the install with out instructions. Lol

[@HandsomeOrHandy]

It’s amazing how much information is normally overlooked in the manual.

[@rajkumargowda9053]

Good job buddy, thank you
I had struggled for 3 hours!
There's a small step you can always miss it. UP and Down pressing at the end of each setting
What's surprising me is all these household machines are really complicated. I feel it's 200 YEARS old technology Americans are still using it 😂

[@HandsomeOrHandy]

If it works, I see no reason not to continue to use it

[@Kownage]

Huge. This was a perfect fix to our issue right after the power went out. Thanks!

[@strifer43]

Lol I just found you and can’t stop binge watching love these videos

[@HandsomeOrHandy]

Thanks, I’m glad you are enjoying the videos

[@Adam-re1bv]

Thank you so much, man. You saved my ass. My Odyssey 1000 "manual" didn't have that info. So you saved my ass.

[@KCbriProduction]

This was the fix. You’re the man

[@santiagovillasenor2239]

Thank you! Worked on my door!

[@SIMULACRA37]

Incredibly helpful. Thank you

[@Mailman-pw5ti]

This video helped tremendously! Thank you ! 🎉

[@HandsomeOrHandy]

Glad it helped!

[@matthewbogdan3798]

Worked like a charm. Thanks!

[@HandsomeOrHandy]

Glad it helped!

[@stevehoheforcongresskansas7031]

Thanks ! Im going to get a manual tomorrow

[@samthekashman]

Hey hey hey take it easy that’s supposed to be a $100 service call to me 😂

[@garrettspencer8766]

0 mm??

[@fidelgutierrez7677]

How about help here?! On the house😊 My overhead legacy 850 is only traveling 3inches and stops when holding the down or up arrow instead of traveling until I let go. Why?!?!

[@jeremythompson0306]

​@@fidelgutierrez7677bad photoeyes

[@heavyleather]

Thank you so much!

[@cameronkhanlar9620]

Thanks. Had the dame problem and it is fixed now

[@inhyeokham6916]

Mine was exactly same issue after outage(it happens on 2am so I realized in the morning), and I thought I couldn’t fix it but I fixed it!!

[@SongHenrickson]

THANK YOU 🎉

[@HandsomeOrHandy]

Hopefully the video is helpful

[@juliuslincoln9564]

Sick just fixed the problem in 3 mins that has taken my landlord a month to fix

[@NM-js8ky]

Thank you! ❤

[@gagandeepsinghgill4988]

Thanks 🙏 😊

[@ivanpreciado6896]

Thanks mannn, you same my job! 😄

[@HandsomeOrHandy]

Glad I could help

[@ericwaltrip6184]

Thank you sir!

[@von_gooch4105]

BRRROOOOOOO!!! It worked!!! 🤝

[@KaiAWIP]

You're a lifesaver

[@HandsomeOrHandy]

Glad it helped

[@jakehernandez9769]

Your the man

[@HandsomeOrHandy]

Thanks

[@allyoucanseef9033]

In the video it wasn't solid red when he pressed the down arrow. This video did not help me. The device was unresponsive.

[@jjcutt]

Noticed that, too. I have solid red lights and pressing the down arrow does nothing.

[@Billybonessss]

Nice truck

[@TheRealHungryJoe]

Chevy diesel 💪🏽 don’t own a truck but would like one like that

[@HandsomeOrHandy]

It’s actually a gasoline, it’s got 370,000 miles on it and I’m hoping to squeeze out another 130,000.

[@TheRealHungryJoe]

@@HandsomeOrHandy good stuff.. push till the wheels fall off..!

[@VernePomraning]

Thank you! Fixed my shit

[@HandsomeOrHandy]

Glad to help

[@Hvacserviceking]

Good work

[@HandsomeOrHandy]

Thanks

[@677javier]

Love you

[@johnfield1971]

You forgot to mention start the process with the door engaged and at the midway point. Now I need a professional!

[@erikyoung9197]

My manual says do not start with door fully opened or closed. But looks like you start in closed position?

[@HandsomeOrHandy]

When I got there, the door was in the closed position and would not open. I really didn’t have much choice but to start from that position.

[@cliftonw1365]

It would be nice to be able to save the video

[@jeremysosa6945]

You da man

[@HandsomeOrHandy]

Thanks

[@paultillman3423]

I missed the program button press after setting each direction. This showed me error even though I read the manual too. Oops….

[@WesTonniges]

I have a red flashing light door won’t stay down and comes right back up about halfway

[@HandsomeOrHandy]

Does it give you an error code?

[@knightme2738]

This also works on the genie

[@curtp8105]

Do yourself a favor and throw that operator away. Get a Chamberlain or Liftmaster.

[@alexevans1183]

Looks more like a surgery studio than a garage! Where’s all the crap?

[@ryanyork837]

That's your problem right there. It's a genie. Rip out that junk and put a lift master in.

[@jeremythompson0306]

Thanks can't find manual

[@chihiroa1045]

Thank you sooooooooo much!

[@HandsomeOrHandy]

No problem