Thanks for this thorough coverage. Replacement rear touch-screens are now available.. (reference your comments at the 2:50 mark).. Adhesive is T-7000 and is a little more pliable to pry off if it's heated a lot beforehand.. My screen was already shattered, so I continued to destroy it in the removal process.. Got the screen out by pushing with a thin screwdriver from the back corner after battery housing removal. I used a sharp X-Acto blade to scrape the remaining shards of glass from the adhesive/edge where it's seated. PS - Don't forget to reinstall the speaker at the 5:45 mark, and the (6) little screws holding my armature were T3, not T4. Cheers.
I'm not sure as to why I'm watching this but just because you're entertaining and it's fun to watch your teardowns. I instantly liked the video and stayed watching the whole thing.
the lense cover has a slight twist and it comes off. you don't have to snap it off. for the GoPro dive suit this cover has to be removed, and it's very easy to remove by twisting it counterclockwise, it's less than a quarter turn at best and it just lifts off.
JerryRigEverything can you maybe do a tear down of Donald trump? I think that you can fix his racist problems pretty well, I have some parts you could use
I bought a refurbished GoPro Hero 5 black. After about 2 months the LCD just stopped displaying anything, but it was still responding to touches (because the settings icon appeared on the front LCD if I swiped on the display). I figured the ribbon cable must be making bad contact.... After watching this video I noticed that the ribbon cable runs behind the battery cage before clipping into the motherboard. By removing the battery and pressing firmly down onto the location where the ribbon cable clips in I was able to get the LCD to make a connection again! (No teardown required) Great video!
JerryRigEverything hey I was wondering what's your current phone that you're using? If it's a note 7 do you plan on returning it after the last recall and if so what phone do you plan on moving to?
Why does the note 7 kept catching fire even the replacement units? theres not enough valid explanation other than faulty battery? can you venture further about it?
Jerry, the best (simplicity + clarity) video I have seen so far. I had accidentally inserted my SD Card between the slot of the body and suspected that I have dislodged some cable due to which the screen has gone blank. From your video, it looks like I might just be right and with luck be able to fix the same. thanks!
hey zack keep posting the videos we have to wait for quite a few days to watch something. there is no one like you on entire youtube i love your channel.
Wow you were not kidding about the front rubber housing. That glue strip down the center is pure evil. Managed to get it off with only a tiny amount of side marring. Noticed the links to your tools in the description though so hopefully next round will be mar free!
JerryRigEverything The key is not to twist hard but to pull the lens outwards and then twist counterclockwise. I do it all the time for night videos when the outer lens produces excessive glare.
Wow, never thought I would say this, but this is the best tear down I've ever watched. Great voice, extensive, cautionary, informative. I got to sub now.
At 04:06 in this video - does anyone know if it's possible to unscrew the black plastic lens from the dark grey lens mount? I'm assuming it's a threaded M12 mount? Or is it glued? Thanks!
Nice vid, but need little mention, gopro filter can be detached just by rotating it, no needs in breaking it to pull back again. The other spots is on point. Wanted to change housing with removing a display from it, now i see it is difficult than i thought
Sir you've made a fatal error on disassembly: The lens caps can be simply removed with just a little twist on the cap, to the left as usual. This video seen you've used pryer to do that.
It's hardly fatal. Removal of the lens housing is to twist it off as it's designed to do so. Instructions for such are included with the Super Suit housing.
JerryRigEverything Pull outwards on the lens cover and twist to the left. It pops right off. It's designed this way so it can be easily replaced if scratched.
JerryRigEverything it is on 0:35 . I know you didn't know that because the little instruction isn't imprinted. GoPro, please tell people max properly next time. Imprint the twist icon on the next production of lens cap now on
Joel Robert Justiawan In fairness to GoPro, as I mentioned the instructions to remove the lens are included on the Super Suit packaging. Generally speaking it would not do GoPro or anyone any good for people to be taking apart their HERO5s without any need to do so. The most common reason previous GoPro dive housing wind up with leaks for example is particulate matter stuck in the gasket. Needlessly removing the dive housing unless you are actually doing a replacement or Super Suit installation just creates an environment for things to go wrong.
I used t3 instead of t4. T4 did not fit for some reason. Was trying to replace the cracked lens...holy moly the imaging sensor is super duper glued together..
Can you replace the internal lens by unscrewing it? Or do you have to replace the whole circuit board it is connected too. Can you separate everything so you just remove the lens
Jerry, thank You for that video! But I still have the question and I think most of viewers too. How dose the lens attached to that plastic tube with the sensor? That's really important question because all of pro users are interested in modifying gopro with other lenses that are widely presented...
Hi there, great video. I have a question maybe you could answer. The tiny gold ribbon cable that connects the power button (and apparently the sound on the video) has come out of the connector and the white connector latch has broken off (happened while changing out a lens). I'm able to fit the tip of the gold cable back in but it won't stay in place when I reassemble the camera. Is there some way to glue it in place? If so which glue could I use safely. I've tried using a tiny piece of electrical tape but it doesn't seem very effective though I have got the camera to work but without sound on the video. Thanks in advance!
The lens can be twisted off gently and doing so with a pry tool you could slip and break the glass. In order to pull the lens off camera facing you like its gonna take your picture then gently pull it out and turn to the left and bam lens is off gently
do you manage Electrostatic discharge control when touching those printed circuit boards? it makes me wonder cuz i had a training about it that if you touch those PCB without ESD control (such as wrist and foot straps), it would damage those IC'S and other parts in the near future and end up not working. thanks.
you wouldn't happen to to know what those three connectors are called that attach the ribbon cables to the main board, would you? I'm trying to make an extension for them to fit a gopro in a very thin slot. there is space on one side for the lens, but not enough space for the whole go pro on the other end.
My Hero 5 camera leaked when I was out surfing. Thought the camera was dead. But used your vid to take it apart, then soaked it in alcohol and it's now operational. Thanks.
Would have been interesting to know if the lens itself can be unscrewed from the sensor housing (has been possible on Hero3/4). Some people like to swap out for narrower angle lenses.
The lens socket is glued to the sensor board and the lens can be removed but not the same way the Hero3 and Hero4 were. Also the lens thread is NOT M12 like the other gopro cameras so you can NOT swap lenses unless you put in a custom M12 socket made to fit the Hero5.
Would it at all be possible to reset an action cam that had frozen by mabey finding the small internal setting's memory battery and somehow disconnecting and reconnecting it ?? Like a reset button .just a thought (v50 pro akaso!!!!) They must have some kind of internal battery? ??
could you test the minimum and maximum operating temperatures? with the hero 4 it shut down after a few seconds in -40 degrees Celsius. and I would like to know if that is improved.
Is the go pro still waterproof if I have removed the lense once and put it on again? As you said that any go pro which has been opened up won’t be water resistant anymore Does removing the lense also count as opening up Thanks
jerry please do a durability test on the Sony HDR-AS50/X3000! It is supposed to go upto 60 meters, and it has an interesting formfactor! the AS50 is only 200 dollars, and the x3000 has full OIS!!
hi man. can you also introduce freezing test for phones. as winters can cold, its quite usefull to know how phone will react at sub zero temps and transitions from + - +
even the lens cap removed, it still waterproof? but I'm not recomended it to keep it off as it is unprotected. hey, they can make accessories replacing the cap for!
Hi Zack 🙂 I’ve just found your vid on the GoPro hero 5 and absolutely love it, but I have a question as I have just purchased a used GoPro hero 5 and like it heaps, but the problem is the audio, so I went on a search to find a little adapter to attach my mic to ,the problem is I’m only able to find an adapter that in Australia is going to cost me in excess of $100 Aud (if I’m lucky, possibly more lol) my question is , I have scoured the internet trying to find a solution , or a diy fix to this as my previous GoPro only needed a $4/5 adapter for a mic, but there’s absolutely nothing I can find, what I need to know is what makes the “GoPro mic adapter for GoPro 5/6 so dang special) and why can’t I diy it ??? Or at least put something together for considerably less that will work, what is in that adapter that makes it so expensive.?? Hoping you can help , if anyone can figure it out it’s you lol 🙂👍 keep up the awesome work, cheers from Australia
HI thanks for making such a detailed video. I notice everyone seems to call the lens cover a lens. A lens is a peace of optics not a plate of glass. Felt the need to play pedant so i could ask the following... Is it possible to unscrew the lens from its holder around where that orange rubber seal is or is it all one single piece from the convex lens all the way back to where the plastic is glued to the sensor board? Many thanks for any info.
Pull out and twist the lens counter clockwise to unscrew it! It is difficult but that's how it's meant to be done. Funny how some people don't just read the manual
I have a gopro hero 5 black and it began to overheat right after the warranty expired. I have done everything to remedy the problem with no success. Gopro wants me to buy a "known good" sd card, but I am not interested in spending more money on this camera. In normal use, the camera will record for a maximum of 2 or 3 minutes. If I put it into the freezer of my refrigerator, it records for over an hour. Obviously the temp sensing component has gone out of range and is defective. Any idea if the temp sensor is something that can be replaced? I've rebuilt cell phones and have done some very complex work. Just wondering if this camera would be worth opening up to attempt this fix. Appreciate any input. Thanks!
Hello my friend. My brother put the micro SD in a gap close to the position that the micro sd fits.then the touch screen went blank. We are thinking go to someone that can repair the camera, but if he opens the camera like you did, the waterproofing is going to be destroyed??thanks
does anyone know if the hero5 or hero6 would work without the back LCD? what I mean is, will the gopro start working if you leave the back LCD unplugged?
Would you happen to know how would inserting a sd card backwards cause rhe lcd screen to light up but nothing shows at all the touch also works. ? Thanks
I've replaced my lens cover because it got cracked when the camera tipped over. Now the new lens is much easier to remove than the original. Is it still waterproof?
Show Zack (JerryRigEverything) some love. Hard working man. Work ethics on crazy, that's a level I've never seen before. If you support his content, you can show that by simple letting him know here in the comments. You can also go a step further by sharing his content to your Facebook page for the who needs it. Support good content!
The touchscreen on mine stopped working just because i took off sd card and battery. It works fine just no screen. any idea what might be? Gopro claims im not using the right sd card which is not the case since with another sd card the screen still doesn't work. so im clueless and now have a half working camera.....
Respect to the Engineers behind the GoPro
All that Technology cramped into a tiny enclosure!
And thanks for the video :)
Xiaomi YI Engineers be like, oh yes, he said a gopro is small and tech...
You can screw anticlockwise the lens instead of pulling it so hard. Great video, thanks!
RawTherapy LOL You mean “Counter-Clockwise”?
jerreece LOL. I'm sure he meant Anti-Clockwise.
RawTherapy either way is still correct
Matter: Anti-matter
Pro Trump: Anti-Trump
Bacteria: Anti-Bacteria
Clockwise: Anti-Clockwise
jerreece you fucking walnut
@@xskerrittx1 you bloody legend 😂
Can you please start tearing down some computer hardware, like the HDD, blu-ray, power supply, gpu etc... Or game consoles maybe, PS 4 etc
Mohamed Mokrane why would you tear down a psu
@@jesse5951 knowledge
Zesy Plays its dangerous
That is boring as fuck
@@venni3996 eve if it is removed from power ?
Thanks for this thorough coverage. Replacement rear touch-screens are now available.. (reference your comments at the 2:50 mark).. Adhesive is T-7000 and is a little more pliable to pry off if it's heated a lot beforehand.. My screen was already shattered, so I continued to destroy it in the removal process.. Got the screen out by pushing with a thin screwdriver from the back corner after battery housing removal. I used a sharp X-Acto blade to scrape the remaining shards of glass from the adhesive/edge where it's seated. PS - Don't forget to reinstall the speaker at the 5:45 mark, and the (6) little screws holding my armature were T3, not T4. Cheers.
Does this glue T7000 hold water?
I'm not sure as to why I'm watching this but just because you're entertaining and it's fun to watch your teardowns. I instantly liked the video and stayed watching the whole thing.
I like the way you work ;-) Thank you!
thanks for making such good videos and i think you are the most honest channel on TH-cam
Thank you for watching!
amen to that
amen to that
Priyansh kumar I
the lense cover has a slight twist and it comes off. you don't have to snap it off. for the GoPro dive suit this cover has to be removed, and it's very easy to remove by twisting it counterclockwise, it's less than a quarter turn at best and it just lifts off.
Can you teardown humans next, with your voice I would find it interesting.
Ill see what I can do.
JerryRigEverything can you maybe do a tear down of Donald trump? I think that you can fix his racist problems pretty well, I have some parts you could use
tear him down :D
Suggestion: Start with eyes, makes it easy to access the Central Nervous System.
u crazy!?
I bought a refurbished GoPro Hero 5 black. After about 2 months the LCD just stopped displaying anything, but it was still responding to touches (because the settings icon appeared on the front LCD if I swiped on the display). I figured the ribbon cable must be making bad contact.... After watching this video I noticed that the ribbon cable runs behind the battery cage before clipping into the motherboard. By removing the battery and pressing firmly down onto the location where the ribbon cable clips in I was able to get the LCD to make a connection again! (No teardown required)
Great video!
The lens twizts of anticlockwise you know...
+Vetle Bø Søli well shoot. Now I do.
haha! I was like "ohh! No!! what is he doing?!"
Vetle Bø Søli counterclock*
JerryRigEverything hey I was wondering what's your current phone that you're using? If it's a note 7 do you plan on returning it after the last recall and if so what phone do you plan on moving to?
It goes on the same way it came off they sell the replacement lens covers and doors on there website
Why does the note 7 kept catching fire even the replacement units? theres not enough valid explanation other than faulty battery? can you venture further about it?
Jerry, the best (simplicity + clarity) video I have seen so far. I had accidentally inserted my SD Card between the slot of the body and suspected that I have dislodged some cable due to which the screen has gone blank. From your video, it looks like I might just be right and with luck be able to fix the same. thanks!
I like how you don't bullshit and get straight to it at a good pace
hey zack keep posting the videos we have to wait for quite a few days to watch something. there is no one like you on entire youtube i love your channel.
Great vid quality, great illumination, great voice/sound. This guy produces top notch quality content. 13/13 IGN
Wow you were not kidding about the front rubber housing. That glue strip down the center is pure evil. Managed to get it off with only a tiny amount of side marring. Noticed the links to your tools in the description though so hopefully next round will be mar free!
The front lens cover will twist off.
+Daryl Stimm lol. Maybe I should have tried twisting harder. Dang.
JerryRigEverything The key is not to twist hard but to pull the lens outwards and then twist counterclockwise. I do it all the time for night videos when the outer lens produces excessive glare.
built quality in this thing is awesome, and your voice is best in youtube community, prove me wrong...
hey could you do a durability video on the moto g4 plus please? it'd be awesome
btw, i really enjoy your content!
hey Jerry love ur videos n as always stay blessed keep continuing with this hope ull get funded in future very soon ;) love from India
+Sarvesh Rudre thank you! Stay blessed too!
GoPros are the best action cameras..
The Videos and picture are so bright, colerful and sharp
Can you do a teardown for sony DCR SX22 ? i have one and the lens in the inside of it is dirty
Nope, it only need a cleaning
Btw. if i got a new lens... but i don't know how to replace it... hmm..
Wow, never thought I would say this, but this is the best tear down I've ever watched. Great voice, extensive, cautionary, informative. I got to sub now.
Can you do bend test on xperia xz or x compact?
hardkor113
I got you fam. Xperia XZ durability test: th-cam.com/video/8NMCqjVoKHI/w-d-xo.html
At 04:06 in this video - does anyone know if it's possible to unscrew the black plastic lens from the dark grey lens mount? I'm assuming it's a threaded M12 mount? Or is it glued? Thanks!
Nice vid, but need little mention, gopro filter can be detached just by rotating it, no needs in breaking it to pull back again.
The other spots is on point. Wanted to change housing with removing a display from it, now i see it is difficult than i thought
Sir you've made a fatal error on disassembly: The lens caps can be simply removed with just a little twist on the cap, to the left as usual. This video seen you've used pryer to do that.
+Joel Robert Justiawan you're probably right. Where did you see that?
It's hardly fatal. Removal of the lens housing is to twist it off as it's designed to do so. Instructions for such are included with the Super Suit housing.
JerryRigEverything Pull outwards on the lens cover and twist to the left. It pops right off. It's designed this way so it can be easily replaced if scratched.
JerryRigEverything it is on 0:35 . I know you didn't know that because the little instruction isn't imprinted. GoPro, please tell people max properly next time. Imprint the twist icon on the next production of lens cap now on
Joel Robert Justiawan In fairness to GoPro, as I mentioned the instructions to remove the lens are included on the Super Suit packaging. Generally speaking it would not do GoPro or anyone any good for people to be taking apart their HERO5s without any need to do so. The most common reason previous GoPro dive housing wind up with leaks for example is particulate matter stuck in the gasket. Needlessly removing the dive housing unless you are actually doing a replacement or Super Suit installation just creates an environment for things to go wrong.
Thank you for sharing this video ,I wonder if you figure out what is the type of glue they uses to stick the rubber parts ?
You are the man! Horsed with it for an hour. You solved it in 2 minutes. Thx!
I used t3 instead of t4. T4 did not fit for some reason. Was trying to replace the cracked lens...holy moly the imaging sensor is super duper glued together..
could you do a video like this for some of the more budget action cameras like Ele-Explorer 4k or an sjcam.
Can you replace the internal lens by unscrewing it? Or do you have to replace the whole circuit board it is connected too. Can you separate everything so you just remove the lens
I would also like to know this. Can you unscrew the lens and change it or is it fixed?
Thank You for the GoPro video. I've been thinking about buying one and I was curious about how they were built and how to repair them.
Jerry, thank You for that video! But I still have the question and I think most of viewers too.
How dose the lens attached to that plastic tube with the sensor?
That's really important question because all of pro users are interested in modifying gopro with other lenses that are widely presented...
Hi there, great video. I have a question maybe you could answer. The tiny gold ribbon cable that connects the power button (and apparently the sound on the video) has come out of the connector and the white connector latch has broken off (happened while changing out a lens). I'm able to fit the tip of the gold cable back in but it won't stay in place when I reassemble the camera. Is there some way to glue it in place? If so which glue could I use safely. I've tried using a tiny piece of electrical tape but it doesn't seem very effective though I have got the camera to work but without sound on the video. Thanks in advance!
I like technician guys doing such dangerous works and still talking so calm...
Can't things like the adhesive be reapplied to maintain the waterproofing?
The lens can be twisted off gently and doing so with a pry tool you could slip and break the glass. In order to pull the lens off camera facing you like its gonna take your picture then gently pull it out and turn to the left and bam lens is off gently
Zack, did you get to see which sensor and processor had?
do you manage Electrostatic discharge control when touching those printed circuit boards? it makes me wonder cuz i had a training about it that if you touch those PCB without ESD control (such as wrist and foot straps), it would damage those IC'S and other parts in the near future and end up not working. thanks.
you wouldn't happen to to know what those three connectors are called that attach the ribbon cables to the main board, would you? I'm trying to make an extension for them to fit a gopro in a very thin slot. there is space on one side for the lens, but not enough space for the whole go pro on the other end.
My Hero 5 camera leaked when I was out surfing. Thought the camera was dead. But used your vid to take it apart, then soaked it in alcohol and it's now operational. Thanks.
Would have been interesting to know if the lens itself can be unscrewed from the sensor housing (has been possible on Hero3/4). Some people like to swap out for narrower angle lenses.
The lens socket is glued to the sensor board and the lens can be removed but not the same way the Hero3 and Hero4 were. Also the lens thread is NOT M12 like the other gopro cameras so you can NOT swap lenses unless you put in a custom M12 socket made to fit the Hero5.
Were is the ZTE Axon 7 tear down? You did the durability test on it months ago.
Will you do Xperia XZ test and teardown?
Jerry can you tear down the new gopro hero 2018? They said on reddit its the same hardware as hero 5.
Would it at all be possible to reset an action cam that had frozen by mabey finding the small internal setting's memory battery and somehow disconnecting and reconnecting it ?? Like a reset button .just a thought (v50 pro akaso!!!!) They must have some kind of internal battery? ??
thats professional, as always ;)
Waiting for your camera test. Want to see how good that EIS is. Google done a good job with that Pixel.
Hey Zack! I am waiting for your iPhone 7 Plus durability test and even more, iPhone 7 teardown. Will be happy to see them soon. Thanks!
Awesome channel dude, congrats, keep on the good work
Hi Jerry, can you make a tear down video of pebble watch 2?
Jerry, can you please tell me whats written on SoC? Its Ambarella, but can you tell me rest of the details printed on it? Huge thank you!
Have you done the 8 yet
Hi Jerry, Could you please consider this interesting smartphone, Vernee Mars? Thank you.
Great VDO. Anyway if the lens is out of focus do I have to tear down tonthe inner gut or just removing the protective glass cover?
Hello Jerry,
maybe you know where the wifi antenna is? I want to put it extern? Do you know if this is possible?
Regards
could you test the minimum and maximum operating temperatures? with the hero 4 it shut down after a few seconds in -40 degrees Celsius. and I would like to know if that is improved.
Is the go pro still waterproof if I have removed the lense once and put it on again? As you said that any go pro which has been opened up won’t be water resistant anymore
Does removing the lense also count as opening up
Thanks
Hey @JerryRigEverything have you thought about doing smart watches
jerry please do a durability test on the Sony HDR-AS50/X3000! It is supposed to go upto 60 meters, and it has an interesting formfactor! the AS50 is only 200 dollars, and the x3000 has full OIS!!
hi man. can you also introduce freezing test for phones. as winters can cold, its quite usefull to know how phone will react at sub zero temps and transitions from + - +
even the lens cap removed, it still waterproof?
but I'm not recomended it to keep it off as it is unprotected.
hey, they can make accessories replacing the cap for!
Hi Zack 🙂 I’ve just found your vid on the GoPro hero 5 and absolutely love it, but I have a question as I have just purchased a used GoPro hero 5 and like it heaps, but the problem is the audio, so I went on a search to find a little adapter to attach my mic to ,the problem is I’m only able to find an adapter that in Australia is going to cost me in excess of $100 Aud (if I’m lucky, possibly more lol) my question is , I have scoured the internet trying to find a solution , or a diy fix to this as my previous GoPro only needed a $4/5 adapter for a mic, but there’s absolutely nothing I can find, what I need to know is what makes the “GoPro mic adapter for GoPro 5/6 so dang special) and why can’t I diy it ??? Or at least put something together for considerably less that will work, what is in that adapter that makes it so expensive.?? Hoping you can help , if anyone can figure it out it’s you lol 🙂👍 keep up the awesome work, cheers from Australia
Bought a GoPro hero 5 on the day launching in my country Malaysia..Foudn the screen bit light leakage...Wondering is the screen still waterproof?
Hi sir! Do you have video on how can i fix go pro hero8 no lights but there is dirplay? Tia. . .
Your video tear downs help me fix my tablet screen with a new one
Can you tear down go pro hero 2018? We wish to see if the hardware in hero 5 is similar to hero 2018
Hi Jerry 👋 can you do something with the gear 360
HI thanks for making such a detailed video. I notice everyone seems to call the lens cover a lens. A lens is a peace of optics not a plate of glass. Felt the need to play pedant so i could ask the following... Is it possible to unscrew the lens from its holder around where that orange rubber seal is or is it all one single piece from the convex lens all the way back to where the plastic is glued to the sensor board? Many thanks for any info.
Love the passion for tech
Pull out and twist the lens counter clockwise to unscrew it! It is difficult but that's how it's meant to be done. Funny how some people don't just read the manual
I had aksed that can we see Hero GOPRO 5 teardown before the end of 2016, and Yes
You made it !
is there a chance to make a replacement (or water resistant patch) of wiped down mode button?
can you take the lens out and add a cctv c mount adapter/ef adapter. you can on a 4, I was wondering if the lens on this unscrews.
Good job. is it still waterproof ??
I have a gopro hero 5 black and it began to overheat right after the warranty expired. I have done everything to remedy the problem with no success. Gopro wants me to buy a "known good" sd card, but I am not interested in spending more money on this camera. In normal use, the camera will record for a maximum of 2 or 3 minutes. If I put it into the freezer of my refrigerator, it records for over an hour. Obviously the temp sensing component has gone out of range and is defective.
Any idea if the temp sensor is something that can be replaced? I've rebuilt cell phones and have done some very complex work. Just wondering if this camera would be worth opening up to attempt this fix. Appreciate any input. Thanks!
Hello my friend. My brother put the micro SD in a gap close to the position that the micro sd fits.then the touch screen went blank. We are thinking go to someone that can repair the camera, but if he opens the camera like you did, the waterproofing is going to be destroyed??thanks
You're videos are so satisfying ♥
Great video! Did you make the tool you used to get between the main body and face plate? I want to make or buy one!
Thanks
Thank you Jerry! I make a video tearing down Hero8 and made a TRANSPARENT case version! You inspired me >
does anyone know if the hero5 or hero6 would work without the back LCD? what I mean is, will the gopro start working if you leave the back LCD unplugged?
Front lens may back with rotation.
Если линзу повернуть и установить через поворот, то получится гораздо быстрее и проще, чем как на видео.
Jerry, I request you to tear down Go Pro Hero 7 Black. See you soon
Would you happen to know how would inserting a sd card backwards cause rhe lcd screen to light up but nothing shows at all the touch also works. ? Thanks
Could you do one on Honor 8? A very popular mid-range priced phone.
please make a test video for new blu life X2 phone, thanks.
how about the go pro 7 hero? the hypersmooth technology quite interesting in the gopro 7.
Maybe freezing the adhesive will do? It will become crunchy and easy to break, just like when gums are stuck in shirts. But I don't know
I've replaced my lens cover because it got cracked when the camera tipped over. Now the new lens is much easier to remove than the original. Is it still waterproof?
Hey, great videos. Can you test the Xiaomi Redmi Note 4?
Hey i like your video quality nicely edited and the way you made your video.
Just awsome That's why i subscribed your channel
is there a way to see the micro usb pinout for MiC input feature?
Hey Jerry! Great video! You should totally do a teardown of the Karma Drone, to go with this video!
Keep it awesome!
can u show the connector pinout so that i can make an adapter to input audio from standard aircraft jacks?
Sir,please do a test on any of the Asus zenfone 3 series.Thank you!
Hi Zach
Please test new Metal Xiaomi Mi 5s and Mi 5s Plus for bending test
Show Zack (JerryRigEverything) some love. Hard working man. Work ethics on crazy, that's a level I've never seen before.
If you support his content, you can show that by simple letting him know here in the comments. You can also go a step further by sharing his content to your Facebook page for the who needs it. Support good content!
The touchscreen on mine stopped working just because i took off sd card and battery. It works fine just no screen. any idea what might be? Gopro claims im not using the right sd card which is not the case since with another sd card the screen still doesn't work. so im clueless and now have a half working camera.....
best
Just wondering... How did you get Windows 95 running natively and not a virtual machine from a USB? I can't figure it out