The only thing I'd add is you should add a little electrical grease to the connectors before you plug them in to prevent corrosion that will cause light failure
Awesome install. Since I did my first LED install, I have never, and never will, run with anything but LEDs. They a way brighter and therefore, safer. Ride safe!!!!
Thank you so much! I spent a while trying to reuse the inner ring only to realize that the LEDs are much thicker than the stock and the ring is not needed to hold the light in place. Was learning as I went along.
@@MotoByChance Yep! That’s how we learn. I smiled to myself when you did not like the way the light was first positioned and you took it all apart again. 😊 That is what I do too!
You likely know by now that you can do the same with your signal lights, where you have a halo ring and when you hit the turn signal you have a yellow in the Center. Getting those installed on my Freewheeler. Thnx for the video?
Thank you! Go find lights you like the look of and do it!!! The difference is so worth it. More and more are becoming plug and play. Just might have to buy a separate adapter. Otherwise, they just take a little time.
@@MotoByChance We have scheduled a trip back on the 9th. I will be so happy. We have been real busy getting the projects done and waiting on deliveries. Final living room stuff comes Fri and new patio and grill comes in a couple of weeks. Whew! Thanks for asking.
I could not agree more with the added visibility. Doing these two projects has given me the courage to take on the more challenging upgrades. I did the tail lights assembly (have that qued to edit) and hope to tie into the front turn signals later today. 🤞🏻
@@MotoByChance Lights that just plug in are usually easy but I have encountered some that just would not fit in the housings. I know every body likes LEDs but I'm sticking with incandescents. I like the look of them better than LEDs myself and I don't like it when LEDs or any really bright headlight is coming toward me.
The cost is something to think about. That is part of why I waited as long as I did. I was saving and looking for options that were not as expensive, yet we’re still what I was looking for. 👍🏻
Looks great! You did it! Celeste’s headlight is pathetic. I think choices are few due to power allowances. I’ll look around on the owner forum. You’ve given me courage.
You so can do it! I believe in you. 👍🏻 Start on the forum, then check YT for anyone with the same make as wiring can be similar between models, then take your time and think your way through. And the difference in being seen by others even during the day is big. I hope to do my last lights, the front turn signals, later today. 🤞🏻
I installed the same lights on my Electra glide. The locator ring has a front and the back it cannot be put in reversed. I don’t know if that was your problem but it worked fine with my lights when installed properly. Not saying you’re wrong just a word of experience
I have a '15 Road King. I've bought several different lights, none were plug and play. Found some on ebay that KIND of fit, but they still feel loose in the housing, like I need to foam them up or something. Had to splice in their adapter, and they came with NO instructions.
Joel, you had to rough time. I am so glad that they made some changes in the last few years so the lights on my 20 are plug and play. I would have been so frustrated if not. Foaming is not a bad idea. Did you try it? How did it work?
Yeah, those rings are no longer fitting. I left them out, too, and my install was 5 years ago or 30k miles ago. Working just fine. The turn signals are as easy as the passing lamps were. Hardest part is to decide what colors and features you prefer 😂 the install itself is a breeze.
Thank you for this feedback on the lights! And glad you like yours. I have the rear lights changed out (working to edit that video), but have not tackled the front ones yet. Decided to stick with the amber. Now just need to install.
Thank you Dusty! These two gave me the courage to take on the upgrades that required some wiring work. Still have the front turn signals to finish, so we will see. 🤞🏻
@@MotoByChance im looking forward to more of your install videos...BUT...I sure would like to see your "demmit bloopers"...haha You go gurl...you got things whooped now, no stopping you...except maybe hubby and check book..Weeeeeeee!!
Not sure. Sadly my knowledge of the Royal Enfield brand is limited. Reach out to the company that makes them as ask. Their customer service is very kind.
The only thing I'd add is you should add a little electrical grease to the connectors before you plug them in to prevent corrosion that will cause light failure
That is a very good point. 👍🏻
I show that on another video, but didn't on this one.
Helped me today ty so much it's my first hog and you was a blessing
I am so glad it did! Some things HD did well making them easy. Others... well, lets just say a good mechanic is a must!
That’s much better and brighter. A must for seeing those critters running across the road.
Right?!? And for being seen when on the road. Ya know?
Now for the turn signals and tail light! :)
Did the rear signals (working on that edit) and hope to do the front signals soon. 👍🏻😉
Good job Robin.
Thank you! 😎🏍🖤
Another great install video, looking forward to the next video in the Robin the Lady Biker garage series
Thank you Bob! Still have the front signals to finish. Didn’t get to them yesterday as I hoped, but hope to soon. 🤞🏻
Awesome install. Since I did my first LED install, I have never, and never will, run with anything but LEDs. They a way brighter and therefore, safer. Ride safe!!!!
Could not agree more. 👍🏻 Have only ridden once since installing them and can already see the difference.
New passing / driving lights look great 👍
Thank you! Editing the one on the tail light/rear turn signals and still need to change out the front turn signals. All in good time.
Well done!
Thank you! 💗😎🏍🖤
Good job, you can do anything!
Thank you! Now to get in and get my turn signals done. 😉😎🏍🖤
Master Tech Robin! Nothing better!
🤣 I wouldn’t go that far, but thank you Bob! 💗😎
Another amazing job! You will not only see better but you will be seen better! Ride Safe
Exactly! It is amazing the difference it makes even during the day. And thank you. 😎🏍🖤
Awesome Robin! Looks like an easy install! Excellent job! 😊
Thank you so much! I spent a while trying to reuse the inner ring only to realize that the LEDs are much thicker than the stock and the ring is not needed to hold the light in place. Was learning as I went along.
@@MotoByChance Yep! That’s how we learn. I smiled to myself when you did not like the way the light was first positioned and you took it all apart again. 😊 That is what I do too!
@@karenshoucairmcgray4902 Well... Why do something halfway or have a finished product that you don't really like? So... Apart it came.
You likely know by now that you can do the same with your signal lights, where you have a halo ring and when you hit the turn signal you have a yellow in the Center. Getting those installed on my Freewheeler. Thnx for the video?
I like them, think I will put some on my bike. Great video!
Thank you! Go find lights you like the look of and do it!!! The difference is so worth it.
More and more are becoming plug and play. Just might have to buy a separate adapter. Otherwise, they just take a little time.
Another great video! You explain it so well! The lights look amazing ... next ... turn signals! LOL
Thank you. Your compliment is deeply appreciated. And I hope to take on the turn signals later today. 🤞🏻
Those lights look great, I can't wait to swap mine out for LED!
Great job Robin 🤘💀
Love the lights so far and they are so worth it. And hope to tie into the turn signals today. 🤞🏻
@@MotoByChance happy to hear that!
Great job. Been wanting to put LED on my Deluxe. 👍
Bet they will look good when you do. 🙌🏻😎🏍🖤
Another great video Robin, thanks for sharing with us. A great way to start my day. Be safe out there!
Thank you so much! Have you gone to collect your bike yet?
@@MotoByChance We have scheduled a trip back on the 9th. I will be so happy. We have been real busy getting the projects done and waiting on deliveries. Final living room stuff comes Fri and new patio and grill comes in a couple of weeks. Whew! Thanks for asking.
@@tennwingman3350 Having recently moved as well, I hear ya! Glad you are getting fully settled and enjoy your trip to get your bike. 💗😎🏍🖤
@@MotoByChance Yeah, so you know all the things that the new house "has to have" that won't work from the old house. Hahaha!
@@tennwingman3350 yep. And we downsized by almost half just to add to all the fun.
They look great, and they will work better for night riding to,👊🏼😎🤗
I could not agree more with the added visibility. Doing these two projects has given me the courage to take on the more challenging upgrades. I did the tail lights assembly (have that qued to edit) and hope to tie into the front turn signals later today. 🤞🏻
@@MotoByChance sweet, you can do it, it's nice that most of this stuff is plug and play these days 👊🏼😎💯
@@OZARKSHDRIDERS it is. Though the one I did this weekend required some simple wiring work. Still had me scared till I confirmed they all worked. 😜
Good job, proud of you. The lights look great.
Thank you. I really appreciate the support. 😎🏍🖤
Another good job. Glad you did it yourself. Congrats👍🏻 Looking good!
Thank you Greg! These were much easier than I expected and I am wondering why I was such a scaredy cat. 🤣 Now for the turn signals!
@@MotoByChance Lights that just plug in are usually easy but I have encountered some that just would not fit in the housings. I know every body likes LEDs but I'm sticking with incandescents. I like the look of them better than LEDs myself and I don't like it when LEDs or any really bright headlight is coming toward me.
Really cool lights . I just afford all these upgraded lights .stay safe 🥸👍
The cost is something to think about. That is part of why I waited as long as I did. I was saving and looking for options that were not as expensive, yet we’re still what I was looking for. 👍🏻
Thank you
Hope this helped.
Looks great! You did it! Celeste’s headlight is pathetic. I think choices are few due to power allowances. I’ll look around on the owner forum. You’ve given me courage.
You so can do it! I believe in you. 👍🏻
Start on the forum, then check YT for anyone with the same make as wiring can be similar between models, then take your time and think your way through.
And the difference in being seen by others even during the day is big. I hope to do my last lights, the front turn signals, later today. 🤞🏻
Looks awesome and you made it look easy. Well done👊💪😎
Love how it turned out! Now to finish the front by doing the tie. Signals. 😁
Amazing and superb !!!!
Really impressed
Thank you! Doing these has given me the confidence to take on the turn signals too. Issue? It will require some wiring work. 😬
@@MotoByChance that's great u will definitely do the wiring work when u can fit those lights
Great job, That looks really good.
Thank you! 💗😎🏍🖤
Nice lights and cool video👍
Thank you! I really appreciate your kind words. 😎🏍🖤
Those passing lights look good, so are LED turn signals and Tail Light in the future? Have fun and be safe.
Thank you and yes Sir! Did the tail lights last Sunday (working on that edit) and hope to do the front signals soon.
Same here, i had to leve the ring out
What I didn’t share in the video is I worked for about 5 minutes before I figured it out. Felt so blonde. 😜😎
I installed the same lights on my Electra glide. The locator ring has a front and the back it cannot be put in reversed. I don’t know if that was your problem but it worked fine with my lights when installed properly. Not saying you’re wrong just a word of experience
I have a '15 Road King. I've bought several different lights, none were plug and play. Found some on ebay that KIND of fit, but they still feel loose in the housing, like I need to foam them up or something. Had to splice in their adapter, and they came with NO instructions.
Joel, you had to rough time. I am so glad that they made some changes in the last few years so the lights on my 20 are plug and play. I would have been so frustrated if not.
Foaming is not a bad idea. Did you try it? How did it work?
Are your passing lights 4.5"? I measured the passing lights on my 2021 Road King and they were 4". Harley's website also sells 4" passing lights.
Yes, they are 4.5”. Wonder if they changed the size from the 2020 to the 2021. Wouldn’t surprise me if they did. 🤨
Where did you purchase these? I can't find them online anywhere.
Yeah, those rings are no longer fitting. I left them out, too, and my install was 5 years ago or 30k miles ago. Working just fine.
The turn signals are as easy as the passing lamps were. Hardest part is to decide what colors and features you prefer 😂 the install itself is a breeze.
Thank you for this feedback on the lights! And glad you like yours. I have the rear lights changed out (working to edit that video), but have not tackled the front ones yet. Decided to stick with the amber. Now just need to install.
@@MotoByChance sent you a pic with white / yellow custom dynamics pancake inserts and smoked lenses just to give you an idea 😉 ride safe!
@@araneaetvelivolum1086 thank you. I appreciate it.
When you will change Turn Signals for the front?
That is a good question. I ran into an issue with the wiring and have yet to find a good answer to date.
Well how are these lights holding up so far? Still working good?
They are still excellent. Beyond happy with them.
@@MotoByChance thanks for the reply! I’ve heard so many horror stories about LED headlights. I’ve been nervous to pull the trigger.
I'm not surprised at all with your LED install success...You're a "can do gurl"..!! BUT...imma still give you an "Attagurl" 😉 😜
Thank you Dusty! These two gave me the courage to take on the upgrades that required some wiring work. Still have the front turn signals to finish, so we will see. 🤞🏻
@@MotoByChance im looking forward to more of your install videos...BUT...I sure would like to see your "demmit bloopers"...haha
You go gurl...you got things whooped now, no stopping you...except maybe hubby and check book..Weeeeeeee!!
@@thedustychronicles739 I show them when I have them. On this one... Most of my 'bloopers' happened when the camera was off. 🙄
@@MotoByChance haha...a likely story..I appreciate you gurl!!
Can i instal it on indian royal Enfield ???
Not sure. Sadly my knowledge of the Royal Enfield brand is limited. Reach out to the company that makes them as ask. Their customer service is very kind.
Is the term "mechanically challenged" acceptable? lol
Oooo! I like that better. 🙌🏻😎