VW T4 - How to Remove Front Wing/Fender

แชร์
ฝัง

ความคิดเห็น • 76

  • @terryteed1903
    @terryteed1903 หลายเดือนก่อน

    Just bought a T4, so, have a sub and I'll be no doubt going through every 1 of your vidz. Happy days.😊

  • @RedHeadForester
    @RedHeadForester 3 ปีที่แล้ว +2

    That trick using the allen key to remove the front panel is going to save me a lot of hassle in future. Thank you!

  • @danw137
    @danw137 ปีที่แล้ว +2

    Hi Joel, thanks for taking the time to produce your T4 videos, they've become one of my 'go to' guides as I restore my 2001 VW T4 800 special. I took my front wings off last weekend cleaned out inside and installed the drainage kit I bought from eBay, your videos were incredibly helpful. Amazingly the wheel arches and inside the wings were almost rust free even though there was a load of damp T4 special Kompost in there! One thing worth mentioning, my front wings were bonded on (pretty sure this was factory panel sealer) as well as bolted and were a complete pain to get off. I had to cut the panel bond and then pour a couple of kettles worth of boiling water between the wing and inside panel to soften the panel sealer, then pull the wing off. It doesn't look like your wings had this sealer so maybe they'd been off before. Anyway, thought that might help someone else who has to do the same job. Thanks again.

    • @EntheogenMusic
      @EntheogenMusic 10 หลายเดือนก่อน

      From one 2001 800 special owner to another, thanks for the tip about the panel sealer! Was a great heads up. Boiling water was a nifty trick!

    • @danw137
      @danw137 10 หลายเดือนก่อน

      @@EntheogenMusic no worries, glad my comment was helpful. Usually every job on my T4 takes roughly 3 times as long to complete as the TH-cam video shows and a good helping of swearing...so it's nice to help someone else out in the same situation!

    • @JoelsStuff
      @JoelsStuff  4 หลายเดือนก่อน

      Everything on my old banger has been off before. I am the 15th owner! Thanks for the info about sealer 😊

  • @samwalker9762
    @samwalker9762 4 ปีที่แล้ว +1

    Perfect timing for the video! Working on my ‘96 T4 today and this was a big help, thanks! 👍

  • @malvaughan
    @malvaughan 4 ปีที่แล้ว +1

    Really helpful, thanks mate 👍🏻

  • @deano2160
    @deano2160 ปีที่แล้ว

    Had this on the save list for a few years now and just got round to doing it. Thanks you for the video mate, it helped very much. Good to see whats what before doing a task than going blind. 👍

  • @johno7808
    @johno7808 4 ปีที่แล้ว

    Great video & very helpful thanks! 👍

  • @stevep9739
    @stevep9739 4 หลายเดือนก่อน

    Need to change my front cross member this is very helpful, 👍

  • @howieouterbridge1986
    @howieouterbridge1986 ปีที่แล้ว

    Awesome! Thanks for this. I have to remove my wings to access the VW compost. Wish me luck!

  • @stephenwalker3679
    @stephenwalker3679 3 ปีที่แล้ว +1

    Made me begin ! Well done 👍

  • @polderfischer8565
    @polderfischer8565 2 ปีที่แล้ว

    That is a very useful Film! Thank you!!

  • @WildPhotoShooter
    @WildPhotoShooter 3 ปีที่แล้ว

    Brilliant , I learned something else.

  • @haskyb9184
    @haskyb9184 4 ปีที่แล้ว

    Nice little video. I’m hoping to find some videos on rear arch replacements as I’m hoping to tackle that on my T4 at some point 👍🏻

    • @JoelsStuff
      @JoelsStuff  4 ปีที่แล้ว

      Thankfully my rear arches seem to be ok. Good luck!

  • @alexholver2507
    @alexholver2507 2 ปีที่แล้ว

    G'day thanks for the vid.
    I just did my 99 and that bloody metal tab on the grille was screwed in possibly from a prior accident fix.
    For this situation take the bumper off first then rhs headlight top bolts, then rhs fender as per vid to get to the screw, then grill comes out etc.
    I'd collected enough compost for a plant pot!
    If you park under any sort of conifer you need to clean them out every couple of years.

  • @adetremontionwhite
    @adetremontionwhite 4 ปีที่แล้ว

    Thank you for vid, i was a little unsure if to taxkle this job but younhave made it look easish so im gunna attempt it my self cheers buddy👍👍

    • @JoelsStuff
      @JoelsStuff  4 ปีที่แล้ว +1

      It’s as easy as it looks. Good luck!

  • @poberauer
    @poberauer 3 ปีที่แล้ว

    Thanks, helped me get mine off today. Btw seems simpler to just get the headlights right off and out the way too.

  • @BAK87
    @BAK87 3 ปีที่แล้ว

    Brilliant. Thanks mate.

  • @buriedintheshed
    @buriedintheshed 3 ปีที่แล้ว

    Great video!

  • @meatmanifesto
    @meatmanifesto 4 ปีที่แล้ว

    Good video you've saved my wings from rusting our, I had a look behind my wings they were pretty full with dead leafes and stuff.

    • @JoelsStuff
      @JoelsStuff  4 ปีที่แล้ว +1

      Yup that happens on these vans!

    • @freakunit
      @freakunit 6 หลายเดือนก่อน

      Is there a way of sucking up.the leaves without removing wings etc ?

  • @leswatson9111
    @leswatson9111 3 ปีที่แล้ว

    Hi Joel, roll on good weather A.
    Les

  • @Mads2595
    @Mads2595 3 ปีที่แล้ว

    Great video👍

  • @gilly4133
    @gilly4133 4 ปีที่แล้ว

    Nice, Good to know its just bolted on. Mines has a dent a some rot so I feel if I see a good 2nd hand one its not too bad to swap. Keep em coming Joel :)

    • @JoelsStuff
      @JoelsStuff  4 ปีที่แล้ว +1

      Not a bad idea at all. Sadly I looked on ebay and there were none any better than mine

  • @patrickford5358
    @patrickford5358 3 ปีที่แล้ว

    I love the KISS principle you apply here. Shows you know what you're doing. Excellent video. I have a loose front panel on my 2001 T4 transporter and I 've been told I need some little plastic lugs that fit onto the end pieces of the panel. Do you know what they are called?

    • @JoelsStuff
      @JoelsStuff  3 ปีที่แล้ว

      Hey, thanks! I’ve no idea what they are called I’m afraid 🙁

  • @notsosmartmart5402
    @notsosmartmart5402 3 ปีที่แล้ว

    Thank you

  • @Pepito499
    @Pepito499 3 หลายเดือนก่อน

    To replace the antenna, is it necessary to do this?

  • @campbellcampbell4157
    @campbellcampbell4157 2 ปีที่แล้ว

    The plastic bracket with the plastic clips are to be loved, just push the centre right through and the plastic bracket unclips with an easy pull. If you lose the centres a plastic golf tee does the job when replacing.

  • @plechovkat
    @plechovkat 10 หลายเดือนก่อน +1

    now i know why they called it in my country a nest for hamster :D

  • @stephenfoxall9655
    @stephenfoxall9655 3 ปีที่แล้ว

    Thank you for the excellent video. On another video that I now can't find I know you fitted drain pipes from the holes just below the window screen. Where can I buy them with the little metal bits for the holes please?

    • @JoelsStuff
      @JoelsStuff  3 ปีที่แล้ว

      Hi there. If you just search ebay for “t4 komposter set” you should find the same kit for about £28 that I used (highly recommended). Good luck!

    • @stephenfoxall9655
      @stephenfoxall9655 3 ปีที่แล้ว

      Joel's Stuff yes found these on eBay @££31. Extortionate and as they come from Austria with £8+ fright and probably Brexit import problems I am going to try another route

    • @stephenfoxall9655
      @stephenfoxall9655 3 ปีที่แล้ว

      Will try dinghy transom drains to go through metal then just buy plastic tube locally and rest from stock.

  • @EntheogenMusic
    @EntheogenMusic 3 ปีที่แล้ว

    Great video mate. Do you know if this is the same process for the later T4 models?

    • @JoelsStuff
      @JoelsStuff  3 ปีที่แล้ว

      Great question, and I’m not 100% sure I’m afraid

    • @EntheogenMusic
      @EntheogenMusic 3 ปีที่แล้ว

      Joel's Stuff No problem mate, thanks for replying. Love your channel by the way. Just bought a T4, will be using your videos for a lot of DIY! Keep em coming 😁

  • @mcjjordan
    @mcjjordan 2 ปีที่แล้ว

    Were you wings not sealed on?

  • @R0ger007
    @R0ger007 2 ปีที่แล้ว

    Is there any sealant between the removed wing and inner wheel arch that needs reapplying when refitting the wing?

    • @JoelsStuff
      @JoelsStuff  2 ปีที่แล้ว +1

      I don’t think so. There is a gap but I think it’s ok to just leave that for drainage

  • @jeromeportable1141
    @jeromeportable1141 3 ปีที่แล้ว

    Do you know how i can remove for thé first t4? I have not got screw....

    • @carl_hall
      @carl_hall 3 ปีที่แล้ว +1

      The wings on early T4's (before1996 I believe) are welded on instead of bolted, unfortunately.

  • @charliesnell1426
    @charliesnell1426 ปีที่แล้ว

    I have a question. Doesn’t the pipes just get blocked with all the crap???

    • @JoelsStuff
      @JoelsStuff  ปีที่แล้ว

      Hey! Thanks for the question. Surprisingly my pipes have not become blocked. However, the debris still builds up behind the fender, so I’m not sure how effective the kit is overall

  • @leswatson9111
    @leswatson9111 3 ปีที่แล้ว

    Hi JOEL just saw your video did that water drainage kit you used work, as I am going to order one.
    cheers. Les

    • @JoelsStuff
      @JoelsStuff  3 ปีที่แล้ว

      Hi Les. It’s funny you should ask because just yesterday I removed the wing to have a look at it. Sadly it looks like the leaves are still finding their way behind the wing - they must get down the gap near the door. The drainage kit still works perfectly well to drain water, but if you buy one similar to mine it will not stop the leaf build up 🙁

    • @leswatson9111
      @leswatson9111 3 ปีที่แล้ว

      @@JoelsStuff thank's Joel, I will do the water drain, not to bothered about build up of debris, just want to stop water getting in
      cant findwhere,no sign anywhere just wet on wheelarches, new screen going in Tues 2/2
      /20 . Les

    • @JoelsStuff
      @JoelsStuff  3 ปีที่แล้ว

      Do you have water leaking into the interior of the van? If so it could be the windscreen - i’ve been dealing with this issue myself and have managed to stop the leak with a bit of tiger seal in a few places

    • @leswatson9111
      @leswatson9111 3 ปีที่แล้ว

      @@JoelsStuff Hi Joel, yes driving me mad, had all rubber mat up, no sign of any leak's, all clean paintwork,
      the wheel arches always seem wet after rain, so having new screen put in Tues 2/2 have also purchased
      one of them kits. It'll probably stop raining when new screen goes in.
      Les

    • @JoelsStuff
      @JoelsStuff  3 ปีที่แล้ว

      A new screen will hopefully sort it! Best of luck.

  • @kaskader5178
    @kaskader5178 2 ปีที่แล้ว

    Ok. But i'm my car the fender is stuck so mach that i can't remove them

  • @citroeno
    @citroeno ปีที่แล้ว

    you dont need to all that to remove fing just pull down sides of bumer to get to bolts

  • @tamariderr
    @tamariderr 3 ปีที่แล้ว

    At the end when the panel is off and you're scraping out the leaves.. where is the water supposed to drain out?

    • @JoelsStuff
      @JoelsStuff  3 ปีที่แล้ว +1

      Hi jack, I have a video on my channel posted shortly after this one where I go into this in detail

    • @tamariderr
      @tamariderr 3 ปีที่แล้ว

      @@JoelsStuff that's great thanks. On your break video you comment that you can't get the disks off or you would have replaced them too.. did you ever manage to get them off? Was it the single bolt that was stuck?

  • @poejalmer8108
    @poejalmer8108 4 ปีที่แล้ว

    I'm not sure but the plastic fixings you pulled out look a bit like the T4/caravelle interior moulding screw clips (look them up on eBay). If they are, the small hole in the middle is for an allen key, which draws out a threaded plastic bolt that has widened two tabs out to secure it. I might be wrong but will be doing this before lockdown ends, so will see. Thanks for a great video!

    • @JoelsStuff
      @JoelsStuff  4 ปีที่แล้ว

      That sounds like the ones!

    • @poejalmer8108
      @poejalmer8108 3 ปีที่แล้ว

      I've now just done mine. Mine had metal studs which had badly rusted heads. I managed to lever them out with a flat head, enough to grab with pliers and then pulled hard to remove them. I replaced them with the plastic trim clips you seemed to have on yours, which works well.

    • @craigthomas7921
      @craigthomas7921 3 ปีที่แล้ว +1

      @@poejalmer8108 i have one video on my channel which shows an easy way to get these plastic clips off with no damage (they're the same ones used inside and out)

    • @poejalmer8108
      @poejalmer8108 3 ปีที่แล้ว

      @@craigthomas7921 Nice, I'll be carpeting the ceiling one day, so that will come in handy!

  • @dampcurtain
    @dampcurtain 3 ปีที่แล้ว

    So I have none of the bolts shown in your video. I'm guessing that I cant take my wing off. 😫

    • @JoelsStuff
      @JoelsStuff  3 ปีที่แล้ว

      None of them? It is a T4??

    • @dampcurtain
      @dampcurtain 3 ปีที่แล้ว

      @@JoelsStuff yeah mine are factory welded. I've got a 94 vw t4 transporter.

  • @davidfirth6535
    @davidfirth6535 4 ปีที่แล้ว

    Any wonder they rot, shite design, regards, David.