Be very careful when you return the steering fluid bottle to its position held by the bolt up top and the rubber mount below. Make you lubricate the rubber mount then support it from the front and then push the bottom of the fluid bottle into the rubber mount. I didn't lubricate it and I didn't support it from the front consequently when I pushed the bottle into the rubber it pinged forward into the chassis void that ducts air into the heater box. It is about 250mm deep and has a fork where it splits into two branches. My rubber mount fell into the forward branch that you can access from the cold air duct. I couldn't retrieve it until I spent £15. On a WiFi endoscope that had a hook accessory. I was able to get into the right branch and hook the rubber, gently retrieving it.....fantastic tool, but next time I'll oil the dammed rubber before I shove the bottle home.
Nice vid. Only thing is I wish you'd mentioned all the different types of bolts. When I took my bumper off there were a few screws and and a couple of bolts missing and I don't know whatb type they are!!
I've got some strange fasteners on the top which I cant get undone, they're flat with a small ring around them and I've not seen them before. This video starts the same as all the others, with the top fasteners already off, so I'm still stuck.
They maybe like the BMW ones. Totally flat and you need to almost get a knife in there to pullt the centre pull away then the female part comes out. It's just doesn't have a thread. So just like a drawing pin stuck in a hole. You can do it 👍
Thank you!
Mine had a few more screws than yours, bit the rest was spot on!
Thanks for the feedback. You can do it 👍
Great vid and I agree with your comment on the “background” music.
Yes crazy isn't it. Thanks for back and keep us posted. You can do it 👍
At last a video without music , many thanks
Ahh funny you should say that. It’s drives me mad that some videos have music and voice at the same time. You can do it 👍
Perfect Thankyou, finally someone who actually shows you step by step.
Keep up the great video's 👍
Thanks for positive feedback. You can do it 👍
Used this today as a guide as I needed to change my headlights. Super helpful videos, thanks!
Thanks for the feedback. You can do it 👍
Perfect explanation, thank you!!! Changed my intercooler today and your help was perfect
Be very careful when you return the steering fluid bottle to its position held by the bolt up top and the rubber mount below. Make you lubricate the rubber mount then support it from the front and then push the bottom of the fluid bottle into the rubber mount. I didn't lubricate it and I didn't support it from the front consequently when I pushed the bottle into the rubber it pinged forward into the chassis void that ducts air into the heater box. It is about 250mm deep and has a fork where it splits into two branches. My rubber mount fell into the forward branch that you can access from the cold air duct. I couldn't retrieve it until I spent £15. On a WiFi endoscope that had a hook accessory. I was able to get into the right branch and hook the rubber, gently retrieving it.....fantastic tool, but next time I'll oil the dammed rubber before I shove the bottle home.
Well done. You can do it. 👍
great vid mate, changing my lights today. this i by far the best explanation.
Thanks for feedback. You can do it 👍
Great video, easy to follow, very well explained 👍
Thanks for the feedback. Keep us posted on how it goes. You can do it
Helpful and time saving, thank you
Thanks for the positive feedback. You can do it 👍
Very well explained Thanks for taking the time .
thanks for the feedback. you can do it :)
Nice vid. Only thing is I wish you'd mentioned all the different types of bolts. When I took my bumper off there were a few screws and and a couple of bolts missing and I don't know whatb type they are!!
I don’t usually say this but in this instant the dealer is the best bet. They will know and have the exact screws and bolts. You can do it 👍
I've got some strange fasteners on the top which I cant get undone, they're flat with a small ring around them and I've not seen them before. This video starts the same as all the others, with the top fasteners already off, so I'm still stuck.
They maybe like the BMW ones. Totally flat and you need to almost get a knife in there to pullt the centre pull away then the female part comes out. It's just doesn't have a thread. So just like a drawing pin stuck in a hole. You can do it 👍
Best on T5 bumpers👍
Thanks for feedback. You can do it 👍
Officially the worst video on how to take a bumper off.
Thanks for the feedback. Hopefully you get your bumper off. You can do it 👍