Vornado Clean-Troubleshoot 753-633-533 Large Whole Room Vortex Air Circulator
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- #NSaleOnTH-cam
Vornado 753 Large Whole Room Vortex Air Ctirculator At Amazon:amzn.to/2NOHSGE At Ebay: goo.gl/m4GFqU
Vornado 633 Midsize Whole Room Air Circulator Fan At Amazon: amzn.to/2uUWPQB At Ebay: goo.gl/2DmZvq
Vornado 533 Small Air Circulator At Amazon: amzn.to/2uTvvSE At Ebay: goo.gl/8DHvgt
Cen-Tech Digital Meter At Amazon: amzn.to/2Sokxyq At Ebay: goo.gl/gVvbPr
Phillips Screwdriver, 2 x 6 At Amazon: amzn.to/2K12Aks At Ebay: goo.gl/uPBNBS
TEKTON 18283 13 mm Wrench At Amazon: amzn.to/2LIwhLL At Ebay: goo.gl/R352kJ
Tactix 200081 Mini Long Nose Plier At Amazon: amzn.to/2LOTr3v At Ebay: goo.gl/tw6CkU
Screwdriver Set (6 PC.) At Amazon: amzn.to/2LyhfJx At Ebay: goo.gl/Vdbxmy
Harbor Freight Tools Coupon Database: goo.gl/9x8mS5
Vornado User/ Service Manual www.vornado.co...
Contact Vornado customer service for replacement fuse. Phone: 1-800-234-0604, email: consumerservice@vornado.com
Vornado Clean-Troubleshoot 753-633-533 Large Whole Room Vortex Air Circulator
Thanks!
You're most welcome. Thank you for watching, commenting, the very kind words and your generous contribution. I appreciate it greatly. Pinned! All the best.👍😀
Thank you. My sister and I are 78 years old and now we can clean our 2 fans correctly.
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
My dude, thanks for reminding me to unplug the fan before cleaning it... seriously. Thanks for helping me clean my fan. This is such a good video!
I created this video because all the youtube videos I found on doing this service on this unit were less than helpful. I hope it will help people service this wonderful fan. Thank you for watching
This was perfect!
Excellent.
This video was very thoughtful and helpful. Thank you so much.
This video allowed me to finally clean the inside of a fan I’ve had for years. Thank you!
Thanks for a well done video! I have 3 of the 533 vornado fans & I appreciate how you explain where the screws are in relationship to the rest of the fan. It makes good sense & aids in alignment of the front fan shroud to the rest of the fan. It helps a lot. The Vornado sticker is parallel to the base (bottom of the stand) & the screws are roughly in the 9:05, 12 o’clock & 2:55 positions, & there is no screw in the 6 o’clock position. Thanks for an accurate explanation!
You're most welcome. I'm glad and happy to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
I have a 753 and I Love it! It is really dirty and after viewing your video I now know how to take the grill off (lost my manual😞) and clean it so thank you so much for making this easy to follow video. Question: thought I remembered the fan needed a small amount of lubricant but you didn’t mention it. Am I confusing my Vornado with something else? Appreciate the help. Thank you.
They're supposed to have something called a permanently lubricated bearing so it should not need lubrication but all the bearing is a sleeve bearing with a copper coating of some type. If yours rotates freely I would not worry about it but if it looks tight or worn a little 3 in 1 oil wouldn't hurt. Thank you so much for commenting. I appreciate it greatly. All the best.👍😀
Great video: thx Richard!
fyi in manual in link provided on page re Cleaning & Maintenance it notes motor is permanently lubricated and required no oiling. Since found this video so long after created you may have another where you did so: if you think improves performance will check it out.
Absolutely LOVE the Vornado circulators, use them all year!!
Yes the "Permanently lubricated" sleeve bearing...... Not a fan, but they are telling the truth but they do wear out and I am not sure if lubricating them does any good as they are sleeve bearings that are "oil Impregnated" and there's nothing to keep the lubrication in there. I wonder if they are a part you can buy from them? Love the fans as well. My new slogan for Vornado, "Often copied. Never better" LOL Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
Thank you so much for this video! I got a balloon ribbon tangled around the motor shaft and because of your video I got it out and it works like new plus I know how to clean my beautiful fan. You are awesome!
You're most welcome. I'm glad to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
I managed to take it apart and get it clean. The amazing thing is cleaning it stopped that extra rattling noise that made me want to toss it. It was such a pleasant surpise. I love Vornado products. I really didn't want to throw it out. Thank you. You're the best. :)
You are most welcome. I may do a lubrication video on this great fan, I love it too. It saves me money on my AC bill and is very pleasant and quiet. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Super... Thanks so much for posting this really helpful video.
Got frustrated broke my hinges. Those clips will not fucking let go so i just trashed it and got a different brand. I know it's immature, but holy shit was it frustrating.
I completely understand. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
I don't know if you can help but I use my Vornado fan every night and it always works perfect, until it doesn't. It will randomly start making a ticking noise sounding almost like one of the blades is hitting the front grill. I have noticed that when it starts to do this that if I press on the front grill the ticking noise gets worse, again like a blade is tapping the grill. This doesn't happen all the time though and the only way to stop it is to turn the fan off for an extended period of time. I've tried banging on it while its running, shaking it, turning it upside down, on it's back , tilting it forward but it still making the ticking noise. I've taken it apart and it looks like nothing is hitting the blades, and if there was something you would think the ticking would happen at a higher rate but it doesn't. Do you have any idea what this could be? The model is the Vornado 560.
It's very hard to diagnose the problem from here. I would suggest that you partially disassemble the fan, say take the grill cover off (understand the safety implications in doing this as the blades will be exposed. Make sure you have a safe environment to do this. No kids, pets or people who are not aware of what you are doing) Be Safe! And see which part is causing the sound. Also if the blade is hitting something there will be wear on the blade somewhere. Another possibility is a broken piece of plastic on the blade or stand and yet another could be the motor or it's mounting. There are multiple variables here. Thank you so much for watching, commenting and the valuable feedback. I appreciate it greatly. All the best.👍😀
Do u have a link to tell us how to clean 683. Been trying for years to get it open.
Great video. My 5 year old Vornado was packed with dust and dirt from running through a remodel. After tearing everything down from your instructions and completely washing the blade and front grill, it looks absolutely brand new. Many thanks.
You're most welcome. They are great fans and it's nice to keep them clean. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
It was driving me crazy till I found you..Thank You....My wife told me ..Go to the internet...
Well done presentation.
Thank you so much for watching, commenting and the very kind words. I am happy to know you get value from my content. I appreciate it greatly. All the best.👍😀
I just broke my vornado fan because they made it look like the mf had clips instead of screws and I strong armed that shit and broke the arms that make it swivel so fuck vornado, it’s like when the Germans thought making custom bolts and nuts for the tiger tanks was a good idea
Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀
Very helpful! Thanks!
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
I am trying to find the pdf file you posted about the fans that you did not mention and I cannot find it I have a tornado flippy V10. Just trying to figure how to take it apart to clean it
This is the only one I could find: www.vornado.com/wp-content/uploads/2016/01/FlippiV10.pdf
Thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀
If I didn't look at your video, I wouldn't know there are screws to open the face of the fan! Thank you!
It's puzzle to take apart and put back together. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
I cleaned my hdx table top fan can you help me? There is a spring and a tiny plastic pin where does it go
It helps with stopping it from spinning
I tried everything possible but mine won’t open for nothing
They are a trick to open for sure. Make sure you've gotten all the screws out. Use a flashlight to see. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀
Thank you, Richard, for all the work you did to assemble these resources and for your video. A few years ago I took my small 533 Vornado apart completely to clean it. Big mistake! I had a hell-of-a-time getting it back together, especially those two knuckles that hold the fan and allow the up and down tilting.
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thank you. Your video and your instructions made a daunting project easy and rewarding. Your step-by-step instructions were concise, easy to understand, and orderly.
This video was helpful to me, thanks for making it!
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. I made this video to help people just like you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
@@richardlloydusa I couldn't find the screws on the thing! Very well hidden in the shadows haha
They did a good job of it. Thanks again. 👍😀
Thanks a million! It's been record breaking high temperatures all winter long here in Key West and my Vornado was so clogged up with thick dust that the blades wouldn't even turn. I followed your instructions on removing the cover, (which I then took outside and hosed down). I cleaned and scraped off the dust that was caked on the blades and smothering every nook and cranny. Aside from being great fans, Vornados are also dust magnets and with the passing of time they grow a thick, grimy pelt of it. Anyway it works like a charm now and keeps me cool and comfortable.
I was wondering where all the heat went? LOL. I love the fan too. It saves me on AC by allowing me to have the temp at least 2 degrees higher than I would otherwise. Great fan. Moves lots of air. Lots of air means much dust. Thank you so much for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
ew
Thanks! Super helpful!
Thank you Excellent Video Great Fan Video Illustration to clean and not break anything!!!
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
@@richardlloydusa Very informative. thanks for the video, otherwise I'd have never known how to take of it's cover. Cheers!
That is not a complete telephone number that you left for troubleshooting
Those are the Vornado model numbers that this video covers. Vonado has multiple support option on line here: www.vornado.com/contact-us
Thank you so much for watching, commenting and the valuable feedback. I appreciate it greatly. All the best.👍😀
thank you for clarifying that, I obviously thought you were giving us a telephone Number for help to troubleshoot
My pleasure. Thanks again.
Nice job…thanks!
You're most welcome and thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thankyou for this video - I have 4 of these that were begging to be be cleaned . I had to use SimpleGreen to clean the grille due to oil soot. Worked like a charm
Awesome! You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Excellent video. Thank you so much, I was able to follow the cleaning instructions without any problem. Had I not watch the video, I would probably still be looking for 3 screws...Duh!👍
I stepped through this, Richard, and was going to give you a ten out of ten for how to properly make an instructional video - but then you didn't show the fan actually working after the service.
Did it? Seems essential.
Sorry for not showing it working. Trust me it is working and I may make one more video on how to lubricate the motor to help it last longer. I am enjoying the fan in the Texas heat and the savings I get using it instead of cranking down my A/C. Thank you very much. All the best.
This was 3-5 minutes worth of info, tops. A very little bit of effort toward writing, rehearsing, editing, and brevity go a long way.
Good info, but spelled out a bit excessively. If you don't know how screws work, taking a fan apart for cleaning is probably not the place to start.
I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thankyou Legend
Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀
Ten years later 🤬🤬
Thank you so much for commenting and watching. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
I know this is really random and unrelated, but 1. I recently found your channel and I love it because i just started taking a bigger interest in electronics so great timing there. 2. Do you know of any project builds that could help teach me electrical circuits better but also be functional (i already built the xbox 360 power supply) I want to do something, but idk what
I am working on my next project which is a under $5.00 Constant Current/ Constant Voltage charger here on Ebay: goo.gl/s2Zn6U I am testing it as a charger with the 12V power supply and it is working fine so far. Stay tuned. Thanks.
Richard Lloyd neat! Will be looking forward to it!
Thank you! Our fan was making annoying noises and this helped. There was a struggle getting the nut back onto the bolt and I’m glad you covered that part to share the trick on how to place it back on correctly.
Glad it helped! You're most welcome and thank you so much for commenting and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
The fan does not disassemble with the clips. Unfortunately, the plastic just fell apart when trying to dissemble. Very cheep and poorly made.
Thank you for watching, commenting and the valuable feedback. I appreciate it greatly. All the best. 👍😀
Thank you!!! Actually accomplished taking apart and cleaning!! Even got it back together!
Damn, I had no idea there was a fuse in the plug. I’ve been using Vornado fans for fifty years, and I’ve never once noticed that. I didn’t even know that was possible. Thanks for the thorough overview and how-to.
You're most welcome. Great fans and it would be a shame to throw one away for cheap blown fuse. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
U Saved my a55. Ty
You're most welcome and thank you so much for commenting and the very kind words. I appreciate it greatly. Stay Cool! Subscribe, Click The Bell and stay tuned! All the best.👍😀
I spent about two hours on the stupid fan and never got it apart. Maybe someone should be smart and make the bolts/screws a different color.🤔😥
Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀
Thank you for an amazingly clear video! You saved me from just about pulling my hair out! You are so kind to make this video!
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
I have a Stanley 4" screwdriver. Can I use it to remove the screws on my model 633 Vornado?
Try it and see. I can't remember what I used at this point. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀
Any idea how to fix the Two Beeps error that emits when you press POWER on the Vornado 660 (similar to the 633 & 533)? I think its a generic error, but my fan won't start when I press Power (the little touch button on the 660)
Trauma 2000 Did you manage do get it to work ? i also have the same issue.
So here im thinking that I had to get rid of the 6 screws Roget to the blades to get rid of the dust. Let’s just say now its in pieces, and I lost some of the pieces. I didn’t even see the 3 on the fan itself. Well, it’s time to buy some parts to troubleshoot this situation.
I wish you well. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀
i hate that they made these new fan with screws holding the cover on, why cant they just make them pop on and off like the old fans? irritating
You never know what the engineers where thinking and many times I wish I knew because for the life of me I can't figure it out. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀
My blade cover has two pieces, i'm having a hard time matching up screw holes to the motor side. don't know the version number, but base is chrome v shape
I can only guess that the something is not correctly assembled as the unit should go together with out issue. Thank you so much for commenting. I appreciate it greatly. All the best.👍😀
I would like to open to clean the blades. How do I open on older model CR1-0021 Type 610? It still works but would like to clean.
I don't own the older one but the trick is to find the well hidden screws. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
thanks for the help! I really needed to clean my fan since its been nearly 2 years since i first bought it and never got it cleaned since i didnt have the tools for it lol
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. It's still a great fan. All the best.👍😀
Thank you sooooo much. I was about to throw my fan out.❤
It took some time to clean but I'm so thankul I found your video 😊
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. I made this video to help people just like you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
Thanks so much for this video! Model 533 has just a few differences but was certainly able to figure it out. 👍
You're most welcome. Great fans. Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀
Thank you so much for this video :D
TY
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
What about the model 623? I have had it for at least ten years but now I am hearing a scraping sound when the fan is on. Took it a part , up to the blade and vacuumed but can't figure it out...might be time for a new one. Any advice?
It's probably worn out if it is scraping. Check and see if the axle that holds the fan blade assemble is lose or wobbles, it should not. If it does then the bearings in the motor are shot and the only fix really is to get a new one. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀
I know this is 3 years old...but Thank you! I bought my husband a lg Vornado & we live in rural area up a dusty road so its definitely needing a good cleaning 2 mos later.
Great fan. You're most welcome. I'm glad to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
My dog chewed my vornado cord. I was thinking about buying a new plug for it, and just trimming the cord down. But none of the replacement plugs have a fuse. Is it necessary?
I recommend keeping the fuse as it is a safety feature. Thank you for watching and commenting. I appreciate it greatly. All the best.
This video helped so much. I throw away my other fan because I didn't know about the fuse.
Dang! Sorry to hear that. I wonder how many fans suffer the same fate because of the fuse? Thank you for watching, commenting and the valuable feedback. I appreciate it greatly. All the best. 👍😀
I love my vornado, but my goodness do these bad boys get dirty!
They move a high volume of air therefore collect more dust. I love mine too. May have to see if I can lubricate it this year when I pull it out of the closet. Thank you for watching and commenting. I appreciate it greatly. All the best.
@@richardlloydusa absolutely! And thank you for the video, couldn't figure out how to get mine apart till I found it.
@@richardlloydusa I believe I remember reading in my Vornado manual that the lubrication system is a closed one, therefore you should never have to worry about that.
@@richardlloydusa man! My mother and sister only buy these little monsters and I had thought why oh why do they get SO dirty? Makes sense now 👍thanks a bunch for sharing the PDF of all the models .
Thanks! Finally fixed my683
Awesome!
You're most welcome. Glad to hear about your positive results. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
This was a big help, thanks!
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Very helpful, EXACTLY what I needed to know. Thanks
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Great Video !!
Now I can clean and put back in the house after storing in the garage
Magnetic screw driver works on reinstalling screws
I love this fan ! Awesome air flow !
You're most welcome. It is an exceptional fan. I'm glad and very happy to know I could help you. Thank you so much for watching, commenting, subscribing and the very kind words. I appreciate it greatly. All the best.👍😀
TY! The 3 screws were holding me up. ;)
You're welcome and thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Why the fuse get blown out company know there must be something wrong? Thanks great video
Most electrical devices are fuse protected. I like that you can easily replace this fuse. Thank you.
Thank you very much. Was thinking of cleaning my 533 vornado. Didn't know where to start the cleaning. Now I do...after watching yr video. Much appreciated. Awesome work
This video is really helpful! Thank you so much!!!
You're most welcome. I'm glad to know I could help you and that you got value from my work here. 😁️ Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Great instructions! Thank you!!!
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Summer season. If you are thr the original owner, Vornado usually provides an extra fuse. At least my smaller unit did.
Thank you for taking the time to film and post.
You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.
I made the error of removing the stand before looking at your simple video. Now cant get it back together properly. any idea's. lots of screws and I can't get it to a fixed position as it is loose.
Thank you for that great video. I followed along with you with no problems!!!!
Thank you, sir!
Very informative...thank you.
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thanks, fixed my Vornado!
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Also, thank you for all the links!!!
Again you are most welcome. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
Thank you!!!
Had to take it totally apart. Don’t wet motor. Especially ours was really chunks of dust. It works
This was so helpful, thanks!
Thank you so much for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Maybe its just me but maybe in another video you could take this further and do maintenance on the motor too. For instance if its older and the motor has accumulated a bit of dust inside and the lubrication has started to deplete as well.
I do that level of maintenance each year on one of my fans and its just a cheapo but its been working great for years now.
I may take a look at that. What kind of lubrication are you using? Thanks.
Great, thank you for the information. Sewing machine oil is made for moving metal parts so that makes sense. I wonder if bearing grease (moly) would do the job too? I will look into it. Thanks again for the suggestion. All the best.
Grease might be too thick for a fast moving fan unless you only use a little bit just to coat.
Remember though, fans dont have ball bearings, just that little piece of metal or something.
The old "permanently lubricated bearing"... LOL I will look into my fan motor. I like it a lot and I want it to work as long as possible. I believe the Vornado has a five year warranty so I would think they would use good bearings but I will have a look. Thanks.
In the 70s, I worked for a company that manufactured replacement parts for the military, including small motors such as the one in these fans. All of the manufacturing specs were provided to us, down to the nth degree. Motors had to be tested to operate way beyond their normal expected use, and even tested to excessive RPMs that they would either fly apart or smoke and seize up. The temperature was measured on these motors to see how hot they got. All the testing had to be monitored by government inspectors to ensure everything was within specs. I don't recall there ever being one motor that did not have molybdenum disulfide speced to use on the motor shafts/bearings (if there were bearings). The claim was that the motors would not get as hot, which would be important in keeping the motor running.
Having worked on cars and motorcycles before that, molybdenum disulfide was new to me, but convinced me that it was superior to what I had used in the past. It was expensive back new, and relatively new, but I could purchase a tube of it through our suppliers. I used it on anything I could after that. I am pretty confident that you would not find anything much better than the moly solution. Look for the Moly EP type (EP is for extreme pressure).
Thank You!!
You are most welcome. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
Thank you Mr Lloyd... Thanks to you my fan is looking brand spanking new!
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thanks 😊
You're most welcome. I'm glad and happy to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Great video, Thanks. I'll clean my 533 and 753.
Thank u
You're most welcome.👍😀 It's a great fan. Thank you for watching, commenting and liking. I appreciate it greatly. All the best.👍😀
thank you !!!!!!!
Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Superb video! This really helped me. Thank you so much.
The center housing ain't coming off for nothing now I'm frustrated 😔
Update I broke it open but it still goes back on
Great video, thanks.
You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Thank you man... great video
Great vid! Thanks much!
Super helpful. Thank you.
Thanks finally was able to get apart thanks to you sir!!!
That's exactly why I made the video. I am very happy to hear I was able to help you get it done. You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.