Desk To Glory’s 1990 Toyota Pickup “Little Red” Walk Around

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ก.ค. 2024
  • Richard Giordano of Desk to Glory shares the latest iteration of his project 1990 Toyota Pickup, “Little Red”. Richard and Ashley have travelled extensively through the Americas in this little truck and details what was changed and why over the years.
    Our No Compromise Clause: We carefully screen all contributors to make sure they are independent and impartial. We never have and never will accept advertorial, and we do not allow advertising to influence our product or destination reviews.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 87

  • @ricoman7981
    @ricoman7981 2 ปีที่แล้ว +10

    I’ve been lucky enough to have travelled around the world quite extensively since my first major trip way back in 1979. I’ve done several long term overlanding trips in Africa along the way. There are many great overlanding vehicles, two of the best in my opinion are the Toyota Landcruiser Troopy and older Land Rovers Defender 110. Looking back I think one of the best small and lightweight vehicles that would have been perfect to have driven around the world would have been the 1985 Toyota Truck. The 1982-1985 Toyota Truck (these were before the Tacoma was developed) were re-designed by the Toyota Landcruiser engineering team. They had a solid front axle, front and rear leaf springs, manual front locking hubs, front swivel hubs and came standard with a bullet proof 22R 2.4 litre engine. I believe a turbo was available in 1985 but for world travel the non turbo would be better due to fuel quality issues in less developed countries. Basically this vintage of the Toyota Truck was a lightweight mini Landcruiser. Tough enough and very capable. With the extra-cab the box was 6.5 feet which would have been plenty of room to live in long term with a pop-top camper in the back. Your red Toyota build is very similar to what I dreamed of back in the day. For people considering long term world overlanding my humble advice would be: 1) just do it, make your dreams come true, 2) go lightweight, too many vehicles are way heavier than they need to be. There are so many great lightweight equipment options today, select your equipment as if you were carrying your gear on your back. Even on a one year around the world backpacking trip I found that I had taken too much at first. Even back in my day I found that I could usually find whatever I needed, even in small villages in Africa and Asia. With a vehicle you may be tempted to take all the creature comforts but be selective and think about the weight of everything you take. 3) Have fun! Have the time of your life. The world has so many great places to see and wonderful, friendly and interesting people to meet. Try to see and do as much as you can. Experiences and the memories that come with those experiences are simply priceless. No regrets.

  • @jimmylewis3062
    @jimmylewis3062 2 ปีที่แล้ว +15

    Absolutely love this build, Richard. So cool how you have a relatively inconspicuous platform but loaded on the inside with useful tech, accessories and amenities. Thanks for giving us a look around and sharing you approach!

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว +5

      Thanks Jimmy! There was plenty of time to think about modifications on a long drive through South America. Lots of "needs" and plenty of "wants" went into this little Pickup. It's a bit heavy, but still under GVWR. Fully loaded with two of us, full tank of fuel, and 30 litres of water and it hits the scales at 5100 pounds.

    • @jimmylewis3062
      @jimmylewis3062 2 ปีที่แล้ว +2

      @@DeskToGlory That's impressive. I also like how an overlanding outfit/build can be right for the particular couple who use it. For example, you mentioned the size of the two of you and how you fit in there no problem. For me at 6'1, it might be a different scenario. The cool thing is setting up an outfit that is a solid match for yourself. Well done!

    • @229Reaper
      @229Reaper 2 ปีที่แล้ว

      @@DeskToGlory you doesn't talk about the front storage rack?What's the bars and how it hold on the cab?

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว +1

      @@229Reaper They're Eezi Awn load bars. I used rivnuts to bolt the rails to the roof.

  • @orientxprsoffroad
    @orientxprsoffroad 2 ปีที่แล้ว +3

    Always amazes me, something so basic, simple and a reliable build. Richard and Ashley you two have pioneered the “modern” overlanding.

  • @montechie
    @montechie 2 ปีที่แล้ว +4

    That's a wicked sleeper suspension! I love how your truck has changed over the years.

  • @Fparrish
    @Fparrish 2 ปีที่แล้ว +2

    Awesome 👏🏼 little red isn’t so little anymore.

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว +1

      He's getting a little thick (6.5" wider up front and a touch over 5000lbs)... ;)

  • @mattheword
    @mattheword 2 ปีที่แล้ว +2

    Such a sick built! Well thought out, simple and efficient 🤌🏽

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว +2

      It has been a fun one to put together!

  • @edwardpeters4700
    @edwardpeters4700 2 ปีที่แล้ว +1

    Richard and Ashley are absolute masters of the inconspicuous but full featured build. Everything you need and nothing you don't.

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว +1

      Thanks so much Ed!

  • @benanderson569
    @benanderson569 2 ปีที่แล้ว +1

    I really like this truck and all the upgrades. So cool!

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว

      Thanks so much!!

  • @rooftoptentliving
    @rooftoptentliving 2 ปีที่แล้ว +1

    Wonderful Richard... So glad to see you and Ash keep going. You both are the ones who sparked my rooftoptent and other roadlife adventures with my daughter back in 2015 and for that I am grateful. Feeling happy to see this today 😊 ~ peace to you both in this present moment ~ good vibes to you both from Appalachia, Gabriel Craft

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว

      Thanks for the kind words Gabriel, we really appreciate it!!

  • @time2maked0hnutz54
    @time2maked0hnutz54 2 ปีที่แล้ว

    Refreshing to see an older Yota with the GFC on it.
    I've been diggin GFC concepts for a while but haven't
    seen it on an older truck.
    Great Vid and a great lookin rig toOo, thank you guys & be safe out there!!!

  • @Jrizzie
    @Jrizzie 2 ปีที่แล้ว +1

    Incredible build 🐐

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว

      It’s definitely a fun one!

  • @regularguy8592
    @regularguy8592 ปีที่แล้ว +1

    good looking truck!

  • @alvaroeloredo
    @alvaroeloredo 6 หลายเดือนก่อน

    Wow, a magnificent build, bravo sir.

  • @garyschapiro893
    @garyschapiro893 2 ปีที่แล้ว +2

    Been patiently waiting for this. Not really, pretty sure I bugged you on few different social media platforms. But thanks and well done. I was really interested in the interior set up of the GFC since we might switch from basically your old set up to GFC. When you stressed how nice inside living space was it pretty much sold me.

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว +1

      If you have any more questions don't hesitate to reach out!

  • @regularguy8592
    @regularguy8592 ปีที่แล้ว +1

    that camper is cool!

  • @sunroameroverland
    @sunroameroverland 2 ปีที่แล้ว +1

    Got to see it all, I missed it at Overland West, Great walk through.

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว

      Thanks so much! Hope all has been well over the holidays!

  • @AdrianHinckley
    @AdrianHinckley ปีที่แล้ว

    Thanks man!

  • @skiptheroad
    @skiptheroad 2 ปีที่แล้ว +1

    Just to let you know, the ARB bumper will not stop damage from hitting a cow or any other cow sized animal. My son hit a cow at about 35 mph with his full size tundra that had an ARB front bumper and the damage was so severe the truck was considered a total loss. I'm sure if hitting a smaller animal, say a deer, his truck and bumper would have faired much better.
    Also, love your truck and channel. Thanks for sharing your experience.

  • @limodrivermike
    @limodrivermike 2 ปีที่แล้ว +1

    nice and minimal. love it.

  • @marcandrews6726
    @marcandrews6726 2 ปีที่แล้ว +1

    Love this guy!

  • @joshtozier611
    @joshtozier611 2 ปีที่แล้ว +2

    What roof rack did you use up front and with what box?

  • @dominica2765
    @dominica2765 2 ปีที่แล้ว +1

    Nice rig be blessed

  • @elliottkiernicki2518
    @elliottkiernicki2518 2 ปีที่แล้ว +6

    Just got a 1986 pickup, I’m super excited! This build is so inspiring! Did you get a custom go fast for your truck? As far as I can tell on their website they don’t sell campers for Toyota pickups.

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว +2

      They made a handful of V1s for Toyota Pickups (see ours, @takethetruck's, etc). I believe they just made the first V2 GFC for a Pickup so they should be hitting the market pretty soon. You'll have to call or email to confirm.

  • @joey0077d
    @joey0077d ปีที่แล้ว

    Some great upgrades on the 90 toy. I got the 3.0 in mine. Time to do some upgrades myself. 👍🏼

  • @regularguy8592
    @regularguy8592 ปีที่แล้ว

    just ordered yota phase 3 motor for my 93 Toyota 😍

  • @hperez1085
    @hperez1085 2 ปีที่แล้ว

    I notice you have a spacer underneath your stereo and dash.. where you get that from ?

  • @michaelfernandez585
    @michaelfernandez585 2 ปีที่แล้ว +1

    Richard is such a handsome stud

  • @chrispratt5738
    @chrispratt5738 2 ปีที่แล้ว +1

    Great build Richard, I really liked your Planar review in overland journal, could I ask how you installed air intake and exhaust on the Planar. Safe travels

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว +1

      The intake and exhaust go through the top of the wheel well. The exhaust goes back and out through the bedside. The intake is routed under the bed.

    • @chrispratt5738
      @chrispratt5738 2 ปีที่แล้ว

      @@DeskToGlory thanks for taking the time to reply. A heater is something we are looking to add to our build

  • @StaplesInTents
    @StaplesInTents 2 ปีที่แล้ว +1

    Nice build. How many places/conditions have you put on the tires? Do you feel that sliders and bumpers are worthwhile?

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว

      The sliders have only ever been used as a step or when using a Hi-Lift. Definitely not a requirement for any real overland travel. The rear bumper replaced a rusty factory one, so yes, definitely worthwhile. I’ve been really happy with the front as well. It’s pretty light since it’s so small (compared to a full size truck bumper).
      We drove around BC/Alberta quite a bit and then down to Mexico, so the tires have seen every season now. I have been really impressed with the AT3s. They feel about the same as KO2, the Falkens, etc. Most of the new all terrains are hard to beat.

  • @beckerlegjames
    @beckerlegjames ปีที่แล้ว

    Do you like the width of the camper for 2 people or does it feel cramped? Cause I like both the GFC and SuperPacific Camper. How is the GFC holding up?

  • @samscott9280
    @samscott9280 ปีที่แล้ว

    Hi Richard & D2G - appreciate the quick walk around, but left me hungry to know some details about the two glanced over components - roof rack and rear bumper. Can you please comment the make/model details here? Thank you! I have a first gen taco with GFC on the way - trying to learn what's possible for roof racks with remaining roof space. Cheers!

    • @DeskToGlory
      @DeskToGlory 8 หลายเดือนก่อน

      The rear bumper is from Trail Gear. The roof rack is a bunch of Eezi Awn K9 from Equipt Expedition Outfitters. I used rivnuts to bolt it to the roof.

  • @nickpeat6333
    @nickpeat6333 2 ปีที่แล้ว +1

    I have a single cab 2008 Taco that I'm looking to put new seats in. What was the difference in weight with the Baja RS's if there is a difference? Any lbs I can save will be helpful at high altitudes.
    Love your build!
    Thanks

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว

      I didn’t weigh the factory seats, but I think the Baja RS seats weighed a tiny bit more. Oh, I’m familiar with the struggle up grades at altitude!!

  • @troycarpenter3675
    @troycarpenter3675 2 ปีที่แล้ว +1

    Interesting Suspension. How does it feel on the highway at speed? How do you think it would accommodate a 1UZ conversion? Great video and commentary style.

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว

      The long travel performs better on road than the factory IFS. Being able to tune it with shock valving and different spring rates REALLY helps. I also threw in new ball joints, tie rod ends, etc so it helps everything is fairly fresh up front. I think with 700lb/in springs up front a 1UZ would be a fantastic combo.

  • @scrappyjackalope9558
    @scrappyjackalope9558 2 ปีที่แล้ว

    What brand are the front fenders?

  • @dennisgallear409
    @dennisgallear409 ปีที่แล้ว +1

    I have a 90 too

  • @butchgreene
    @butchgreene 2 ปีที่แล้ว +1

    With the amount of immaculate detail you have, how can stand to not have the pinstripes on the fender?

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว +1

      Haha, I have a good friend who keeps asking the same thing! Need to buy some silver paint and avoid the caffeine one morning...

  • @BradenYoungMTB
    @BradenYoungMTB 2 ปีที่แล้ว +1

    How much shock travel do you have in the rear have?

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว +1

      They're 10" travel shocks in the rear, 8" in the front.

  • @jj8153
    @jj8153 2 ปีที่แล้ว

    Awesome build! How many miles does little red have?

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว +1

      About 432,000 kilometers at the moment 👍🏻

  • @yotagang3705
    @yotagang3705 2 ปีที่แล้ว

    What gears you running?

  • @iSAAConrad
    @iSAAConrad ปีที่แล้ว

    Richard I’m super late to the party but what did you do to get your high beams to work with the stock column lever!?

    • @DeskToGlory
      @DeskToGlory 8 หลายเดือนก่อน

      These headlights were plug and play. The LP9s are on a separate switch.

  • @leoventura4094
    @leoventura4094 2 ปีที่แล้ว +1

    Any plans on engine upgrades ?

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว

      The little 22RE has some LC Engineering parts to helps it live a long healthy life and add a couple of ponies... but one of these days a 3RZ would make a perfect little upgrade suited to this truck.

  • @stephencarew5795
    @stephencarew5795 ปีที่แล้ว

    What wheels are these? I see they’re fifteen 52’s, but I didn’t know they made any wheels that worked with the front hubs. do you know the model? Offset? Etc?

  • @josemadrigal9754
    @josemadrigal9754 ปีที่แล้ว

    Where can u buy the same camper

  • @timeforbigchange9417
    @timeforbigchange9417 2 ปีที่แล้ว

    This go fast is bad ass and will fit on my 88' Yota sr5, if i can get one. I'm so glad when people don't fall prey to the Four Wheel Pop up Campers built by tweekers in Woodland Calif. I increased my horsepower on my 22re by putting a K&N air filter and LCE Header system on my 116 hp. motor. Also a centerforce clutch. I did put a racier cam shaft and bored it out to .30 over. I guess I was trying to get V6 power out of it. It does pull away on hills from stock 88' V6's of that year. TMI. I hope your vinyl pop up sides don't make a lot of noise in heavy wind storms?

  • @kennethsouthard6042
    @kennethsouthard6042 2 ปีที่แล้ว

    So, I assume that the additional 1,000-pound capacity is why I see most expeditors and hot shots opting for the 350s vs. the 450s.

  • @Granola_underground
    @Granola_underground 10 หลายเดือนก่อน

    What shift knob is that? I dig the mountain range design on it.

    • @DeskToGlory
      @DeskToGlory 8 หลายเดือนก่อน +1

      It’s from Trail Gear 👍🏻

    • @Granola_underground
      @Granola_underground 8 หลายเดือนก่อน

      Thanks!!@@DeskToGlory

  • @TheShowtime85
    @TheShowtime85 ปีที่แล้ว

    How many miles does your truck have now?

    • @DeskToGlory
      @DeskToGlory 8 หลายเดือนก่อน +1

      450,000 km 🎉

  • @Benji27209
    @Benji27209 ปีที่แล้ว

    Where can I get a camper like that?

    • @DeskToGlory
      @DeskToGlory 8 หลายเดือนก่อน

      Go Fast Campers

  • @bajar.m.6953
    @bajar.m.6953 ปีที่แล้ว

    I have a 1992 same truck but with a 1998 Tacoma engine 2.7 way more power. This truck are way better build than Tacoma. 👍🏾

  • @MrMgc99
    @MrMgc99 ปีที่แล้ว

    What wheels are those 😳

    • @DeskToGlory
      @DeskToGlory 8 หลายเดือนก่อน +1

      Fifteen52 Turbomac HD classics 👍🏻

  • @vuyovxn
    @vuyovxn 2 ปีที่แล้ว

    cute

  • @drcav_photo
    @drcav_photo 2 ปีที่แล้ว +1

    When is the LS swap happening? 😈

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว +1

      I’d love to throw an R2.8 or 1JZ in it to be honest.

    • @drcav_photo
      @drcav_photo 2 ปีที่แล้ว +1

      @@DeskToGlory I guess at least one of those keeps it in the family

    • @DeskToGlory
      @DeskToGlory 2 ปีที่แล้ว +2

      @@drcav_photo The most realistic worthwhile swap would be a 3RZ. 50% power increase without a crazy amount of work. Just waiting for a donor truck to fall into my lap.