Cable Replacement and Garage Door Off Track - 1st method- SGD
ฝัง
- เผยแพร่เมื่อ 10 มิ.ย. 2022
- Supreme Garage Door Repair
307 W 7th St #828, Fort Worth, TX 76102
19726197222
www.supremegaragedoortx.com/f...
goo.gl/maps/dcffLr7esSVxbED27
In this video we will show you guys how to deal with a garage door off track and a cable replacement
---------------------------------------------------------------------------------------------------------------------------------
Garage doors are a big part of Supreme Garage Door Repair services. Additionally, in addition to our Fort Worth garage door repair services, we offer Fort Worth installation fittings and Fort Worth hardware, as well as Fort Worth maintenance services. For any of your Fort Worth repair needs, all you have to do is give us a ring. The internet is a waste of time and money. Fort Worth, Texas residents, look no further than us. Today is the day to finally make that long-overdue phone call!
Repair of the Garage Door in Fort Worth
Our garage doors in Fort Worth, Texas, are among the best in the city.
The prospect of finding the greatest garage door in Fort Worth has had you tangled up in knots. We know how difficult it may be to find the proper garage door for your home. To ensure that only the best is served, we are a Fort Worth, TX-based corporation. Many people look to us for guidance, and we never let them down. We've got you covered when it comes to high-quality door hardware. Let's get you a solid, long-lasting, and dependable front door now! It only takes a few digits to get the job done. If you have any questions, don't hesitate to contact us.
What an amazing video!!!!! its hard to find a contractor that knows about garage doors and will actually come out. This is crazy helpful. Thank you so much!!!!
I've seen some other videos but this video truly guides you along answering the question: WHY for everything. Great video.
I had this similar issue and got it fixed. Great instructional video. Saved me a couple hundred dollars!!
This was explained so well! Thank you. I feel like a pro now. I guess I’ll go try it out.
Hello @neilcannon724 , thank you for watching.
Great tutorial video.Thanks and this will help me a lot as a first timer.
Hello @binggalamgam3195 , thank you for watching.
I just fixed mine! thank you very much!
Thank you sir I been trying to figure this out for a while
Thank you! I appreciate the help. Great video! Very informative...
thank Very helpfull The best expanation I coud find.
In my profession, when on a call for a "service/repair". It's policy to replace the cables, do not install the kinked & frayed cables back on. Otherwise another service call soon... Great info video😁
Right!!!;new drive cables is a must
This is exactly what i needed help with. Thank you both
Thank you so much. Very well explained. This video help me a lot.
Great but if there's only a single spring ???
Gracias
My right side cable keeps un-spooling from drum. I fixed once and it did it again today. Should I push garage all the way up evenly and then lossen both spools and then tighten them up? Or do I need to re-spool and then look at tightening my torsion spring? Can't figure out what's causing this cable to keep unspooling
Don't listen to this guy.. you're going to get hurt 🤕
If your door is up on one side while down it's definitely off.
Not sure if you're knowledgeable enough to fix your problem.
Take an 18" hardened steel 1/2" rod in the spring hole an loosen the 7/16 12 point bolts... Be Careful, the rod will want to pull downward in most common cases. It's dangerous an depending on your location very strong. After loosing the spring's, tighten the left side cable, tighten the bolts an lock it off an vice grip the outside of the tube so that cable is tight. Then do the same on the right side cable that should be loose at this point.
Tighten it then add a quarter turn back to each spring an tighten the bolts on them. Slowly open the door watching for any problems.
Remember a 16 x 7 could weigh around 300 lbs depending on your location
F
Too bad the manufacturer doesn't give specific torque specs on drum and spring set screws...fewer over or under torques...but then meh must not be that hard to get right without a torque wrench
nah...much easier method...no drum release required..raise the loose cable side higher than the tension side..rewind cable on drum..lower , then check balance..use a piece of cardboard not to damage the wall with vise grip, too
I was looking for this comment so I didn't have to write it. ❤ Everyone has their own methods but the fastest way is just rewrapping the drum without loosening this set screws for sure!
Don't work on the drums in either position. You're going to get someone hurt bud, not all springs are 225s 🤏🏻
What I did since my door was almost shut but tilted a little. Wife and I evened it out and then pushed it up, then viced grip guide rail to keep it up. Then I just re-wrapped the cable around spool. Also, I fixed my open and close adjustment since I was told that when power goes out it can reset and cause problems. That helped a little but I'm still worried I'm causing harm to my nice motor since it doesn't operate as smoothly as it use to. She needs an expert to tweak or I might just upgrade my ancient spring.