There's an easy fix for that: * Open fuel fill door (button on the right-hand side) * Remove fuel cap. * Insert fuel nozzle and squeeze until fuel flow cuts out. * Reinstall fuel cap. * Close fuel fill door. * Bill customer for 2 pounds per liter and half an hour of work.
Problem with XprogM software when reading 9S12 is with usb drivers of software. On PC where you will install XprogM software you must take care that you do not install any others software what use this type of usb drivers FTDI drivers. If you do that way, you will not have peoblem with reading and verification. I need a lot of time and trying different PC-s to get this conclusion.
@LMAutoRepairs had abs serviced urgent pop up and such. Has c006468 roll rate sensor. Algorithm based failures and u300000 control module. General failure information. Contacted loads of people and specialists no one seems to be interested in resolving the issue. I'm typing this as I'm sitting in the car with diag trying to sort it out.
@LMAutoRepairs had CEM out and SRS out of the car, nothing looks to be damaged or out of the ordinary. Had no prior warnings to the issue, just appeared one day.
I've never had one come back with corrupted data on Volvo or anything else when bad data has been fixed. Once a new battery has been fitted they seem to be ok for me 🤷 Well, except for Fiat but that's hardware fault with the ATIC.
I was just to say the same... this is not my first rodeo, and this particular issue, once sorted and a good battery is kept, never seen an issue again... 👍👍👍
My clone xprog has never been any good with 9S12. Have you tried with the 608? Could even buy a dedicated 9S12 programmer. I'm even toying with the idea of getting a P50 but I don't do that many airbag modules to be fair. It's only approx £500 so it's not out of the way. Anyway, good fix 👍
I have used the 608 for a few similar jobs, not sure if I have ever used it on a 9s12 though... A dedicated Motorola programmer is definitely the way if you do enough of them... 👍👍👍
nice going there Luis
😊
Thanks...
👍👍👍
Hello, I have a volvo v50 and only have the code CFFF what should I do?
Is it possible to delete the error via OBD?
If you have how to reflash the module with Vida or other capable tool, possibly...
Thank you for another great video!!!
😊
👍👍👍
Great fix. Is there a fuel guage issue to it was reading half a tank 😂
It is suspicious when they do... lol
👍👍👍
There's an easy fix for that:
* Open fuel fill door (button on the right-hand side)
* Remove fuel cap.
* Insert fuel nozzle and squeeze until fuel flow cuts out.
* Reinstall fuel cap.
* Close fuel fill door.
* Bill customer for 2 pounds per liter and half an hour of work.
Love that fix!
😅
Problem with XprogM software when reading 9S12 is with usb drivers of software. On PC where you will install XprogM software you must take care that you do not install any others software what use this type of usb drivers FTDI drivers. If you do that way, you will not have peoblem with reading and verification. I need a lot of time and trying different PC-s to get this conclusion.
That's why I usually connect it through com port... not usb... but still have the same issue...
👍👍👍
Thanks a lot for the video!
😊
👍👍👍
Got a volvo xc60 2013 srs module u00030 code, any ideas?
That could be an internal fault with the module itself...
What is the background of the problem?
👍👍👍
@LMAutoRepairs had abs serviced urgent pop up and such. Has c006468 roll rate sensor. Algorithm based failures and u300000 control module. General failure information. Contacted loads of people and specialists no one seems to be interested in resolving the issue. I'm typing this as I'm sitting in the car with diag trying to sort it out.
@LMAutoRepairs had CEM out and SRS out of the car, nothing looks to be damaged or out of the ordinary. Had no prior warnings to the issue, just appeared one day.
@BorisSpark
Sorry, ABS or SRS?
@@LMAutoRepairs both
Maybe try UPA instead of xprog. It's reliable. Thanks for your videos
😊
Thanks!
👍👍👍
Bungie jump to celebrate 100k subscribers? 😂
🤣
Not sure yet...
😋
Where do you get the clean file?
Mr. Google...😋
👍👍👍
С адреса 8008 и до конца файл должен быть заполнен ff
@@Xxxxxxxxxxxxxxxxxxxxxxxxxxxllможно ссылку на рабочую пару?
Half a tank of go go juice ⛽️
😊
top
Thanks!
👍👍👍
Nice microscope! Model?
Nothing special to be honest, but does the job!
👍👍👍
will be back in 6 months. with the same problem. buy donor - clone data.
I've never had one come back with corrupted data on Volvo or anything else when bad data has been fixed. Once a new battery has been fitted they seem to be ok for me 🤷 Well, except for Fiat but that's hardware fault with the ATIC.
I was just to say the same... this is not my first rodeo, and this particular issue, once sorted and a good battery is kept, never seen an issue again...
👍👍👍
My clone xprog has never been any good with 9S12. Have you tried with the 608? Could even buy a dedicated 9S12 programmer. I'm even toying with the idea of getting a P50 but I don't do that many airbag modules to be fair. It's only approx £500 so it's not out of the way. Anyway, good fix 👍
I have used the 608 for a few similar jobs, not sure if I have ever used it on a 9s12 though...
A dedicated Motorola programmer is definitely the way if you do enough of them...
👍👍👍