1971 Cutlass Ep 10 Cowl Replace & Rear Floor painting
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- This video feaures 3 areas of rust repair. First is sanding down the rear frame and floor area and painting it. This is followed uncovering some pretty bad rust on both inner and outer cowl panels, which get replaced with new full stampings from AMD. The passenger side cowl to rocker reinforcement panel gets repaired, while I fabricate and replace most of the one on the driver's side.
0:15 Sanding down and painting the rear frame and floor
6:31 Dissasembling and rebuilding the passenger's side cowl area
26:53 Dissasembling and rebuilding the driver's side cowl area
47:20 Outro with credits
Here's a link to my "1971 Cutlass" Playlist with all of the Cutlass videos:
• Restomodding a 1971 Cu...
Parts used from Summit Racing Equipment:
Auto Metal Direct Outer Cowl Panels 376-3468-R (Passenger's side):
www.summitraci...
Auto Metal Direct Body Inner Cowl Side Panels 376-3468-1R (Passenger's side):
www.summitraci...
Auto Metal Direct Outer Cowl Panels 376-3468-L (Driver's side):
www.summitraci...
Auto Metal Direct Body Inner Cowl Side Panels 376-3468-1L (Driver's side):
www.summitraci...
Although I did not purchase them (it would have taken too long to get them), the Cowl to Rocker Reinforcement panles are available. Please note, Summit Racing's website does NOT list these parts as fitting the Cutlass. My guess is they will fit with some minor modification:
RESTOPARTS® Supplied Cowl Reinforcement Panels M240189
www.summitraci...
Music Credit:
"Rediscover (drumless)", "Not So Far Away", and "3033" written, performed, and produced by Aq Xico @gobah All used with permission.
From the TH-cam Music Library:
“Heavy Petting” by Otis McDonald
“Jumpin’ Boogie Woogie” by Audionautix
“Calluses II” by William Rosati
“Beach Disco” by Dougie Wood
“Urchins” by Rondo Brothers
“Wolf Kisses” by Otis McDonand
Your doing a wonderful job, my 70 Cutlass S was as rusty as yours and after 10 years its almost ready for paint... you keep us motivated friend. God bless.
Thank you!! I'm glad to hear yours is moving forward too! It certainly can get discouraging at times.
You are a very brave man!
Thanks, I appreciate it! Watching other TH-camrs gave me the confidence.
@@CobblerBob check out Halfass Kustomd.
He can do it all. You will like all his videos.
@@CobblerBob that's Kustoms with an s
Amazing progress 👍
Thank you so much! I appreciate you taking time to comment!
With all these hobbies, your wife knows you won't stray too far. 😂
😂
This is turning out great! I love it when you take out something rusty and weld in good material... Got a like for your great work!
ThAnK YoU!!☺️
What welding machine are you using to weld.........stick, mig or tig ?
It's a Lincoln Electric 140HD WeldPak. It's a wire fed Mig welder. I'm using .025" wire and 75/25 Argon CO2 gas.
Try and add a little more amp or a little less wire speed to get better melt-in, those spots are hard to grind and the pockets and pinholes can be a rust spot
Otherwise nice progress!
I'm still trying to dial in this new welder. I did try the next heat setting up, and when I do, the weld tends to splatter right out of the welds. I'm sure there's improvement to make, I'm just not sure what!
Wow! 🤩 awesome job man keep up the good work 😊
Thanks so much!!