Normally I'd put a floor jack under the ball joint to support the weight from pulling on the cv joints, mount the strut to the knuckle using the bolts without the nuts, then I'll slowly lift and guide the strut to install the mounting bolts. I'm not that tall either, even with a lift, I can't hold the strut and put the bolts in at the same time lol. Great video nonetheless, no jibber jabber and straight to the point.
My 2011 Murano has a slight knock which seems like it in front of the dash. Can the strut be loose or something in the strut housing that can be loose?
I figured it out, line up the cages to the joint with the boot pulled back and *new grease And just hit the hub with your palm if it’s capable went right back in
+Thomas Carroll Thank you for your interest in our videos! While there are various videos on the internet that will show you how to check if your struts are defective, the best and most reliable fashion is to have it evaluated by a reliable professional. Please let us know if you have further questions.
По резьбе не стучите молотком, забьете резьбу, лучше наверните гайку и стучите по ней, при откручивании она поправит резьбу. Русские не украинцы, русские дают только добрые советы и они не хотят никого обмануть, на Украине боремся с пособниками Гитлера.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Great video, she is very well spoken and easy to understand
Just pulled this repair off yesterday. Thank you, Sue~ and 1A for the tutorial. You rock!
this was the best video i have ever seen on TH-cam. You did an excellent job from beginning to end. Please do more.
+Arthur hicks Thanks so much for the positive feedback!
Great video as usual! Anyone else notice that nail head in the right hand side of the tire tread at the end of the video when she remounted it?
Thank you so much for making this very thorough video on this procedure!
+Wesley Funderberg Thanks for the positive feedback!
Normally I'd put a floor jack under the ball joint to support the weight from pulling on the cv joints, mount the strut to the knuckle using the bolts without the nuts, then I'll slowly lift and guide the strut to install the mounting bolts. I'm not that tall either, even with a lift, I can't hold the strut and put the bolts in at the same time lol. Great video nonetheless, no jibber jabber and straight to the point.
Tough lady!
Great job 👍
thank you for this her explainatikns are always so good
Please do one for 2015-18 Nissan Murano. This video was awesome.
+spartty We're always cycling through common cars. We'll add this repair to our list! 1AAuto.com
+1
2017 Nissan Murano
very good step by step instructions. Thanks for posting this video.
great job the video :) keep up the good work.
Nicely done video. Thank you
U guys taught me so much it's not even funny lolol
Great video!
These videos are awesome! Thank you!
+Adam Savage Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
What happened to the rotors? They started out drilled/slotted....
Great video
Excellent video! Thanks a lot!
Great video! I might have used a bit of anti-seize on the bolt threads.
+beerbrewer737 Thanks for checking us out. 1aauto.com
Man, She is definitely my kind of Gal.
+POPS Thanks for watching!
Excellent !!!
Hello 1Auto, I'm looking to raise my chassis suspension a bit to give my 2010 Murano a good ground clearance, will replacing the struts help?
WOW!! great content!
Do you need an alignment after installing them
+@cosmopaynetv9099 Yes, an alignment would be needed after installation.
My 2011 Murano has a slight knock which seems like it in front of the dash. Can the strut be loose or something in the strut housing that can be loose?
Did you get any info on this?
Can i change the Mount only ?
Good JOB ! where can I find the LIGHT ?
Thanks A1 AUTO
+SANG THONG Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
It seems like you don't have video for 2015 and later Murano? My 18 murano struts already need to be replaced.😒
Como cambiar los sensores de oxigeno del nissan murano 2012 modelo S
there is a nail on tire
What do you do if you managed to separate the cv internally?
I figured it out, line up the cages to the joint with the boot pulled back and *new grease
And just hit the hub with your palm if it’s capable went right back in
How can you tell if the strut is bad? I don’t see any fluid leak.
+Thomas Carroll Thank you for your interest in our videos! While there are various videos on the internet that will show you how to check if your struts are defective, the best and most reliable fashion is to have it evaluated by a reliable professional. Please let us know if you have further questions.
@@1AAuto Can you post a video showing how to replace a crankcase breather hose on a Nissan Murano? Mine ripped while replacing my valve cover gasket.
+Jeffrey Meeks We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
Your car floats and loses handling and the struts make and loud knock on every tiny bump.
💯
You didn’t list a 21mm wrench on the tools list.
13:00 Nail in the tire. Oops! It's a screw.
По резьбе не стучите молотком, забьете резьбу, лучше наверните гайку и стучите по ней, при откручивании она поправит резьбу. Русские не украинцы, русские дают только добрые советы и они не хотят никого обмануть, на Украине боремся с пособниками Гитлера.