Depending on how tall are you and the weather outside. Here were I live gets hot, so that amplifies the heat and I can definitely tell when my fan is running. I mentioned height because that will determine were your legs are going to be and if you are tall your legs are going to be closer to the engine.
Hey Sanjay, black ones are OEM (Rentjal Fat Bars), gold ones are Pro Taper Low Bend Carmichael model). If you are referring to the clip ons the clip ons are Woodcraft. I have a video about them 😊
Sorry to tell you but I think you forgot the most important part, theres a bleeder on top of the thermostat where a huge air pocket gets stuck... apparently its extremely important
Thanks for the observation. I do have to say that probably helps with bleeding the system easier but maybe doesn't prevent you from effectively bleeding the system. I replaced the coolant about 1000 miles ago and my levels have been pretty consistent. I am pretty sure eventually those air bubbles will end up in the coolant reservoir. Thanks again
Ola meu nome é Márcio sou de Curitiba Paraná Brasil....tenho uma moto igual a sua uma gsx s1000 ... minha é porq a tua tem as caranagens branca é de fabrica .. as no brasil saiu na cor vermelho pu azul ou no fosco
Imagine how much longer the video would be if I’d do that 😂. I didn’t use to put all the bolts because I was always removing and re-installing the fairing. I hope the rest was useful. If not, sorry you have an amazing rest of your day sir!!
The bike look super.
Good video, need to do it to mine. Don't think it's been done. Bought the bike last yr.
Thank you, most people overlook this part of the service. I'm like you. If I don't have the history I rather do it. Thanks for the comment.
Hi, is the water pump housing plastic? The lower hose part
Love this bike! I am ready for the local track to open so I can make some pulls! :)
Hey Kyle, man tell me about it. My local track is not open yet! I am so ready!!
Hello, excelent job
Could the lowest point to drain coolant be the oil cooler?
Workshop manual tolds that it needs 2,8 l
Congratulations for the video
You're going to drain coolant from the OIL cooler?
@@austinchave1497 The oil cooler is an oil-to-coolant type cooler.
is it normal when you i
used it. it feels like your knees are burning?
Depending on how tall are you and the weather outside.
Here were I live gets hot, so that amplifies the heat and I can definitely tell when my fan is running.
I mentioned height because that will determine were your legs are going to be and if you are tall your legs are going to be closer to the engine.
Hi did you manage too get all the air out system mines is doing the same
Hey Paul, what do you mean? It has been more than a year and I have checked the level multiple times and has remained the same, no issues whatsoever.
Will do the same m8 mines is draining out the black hose once it cools down does it need the air out of it m8
Did you use tap water or distilled?
Distilled. 👍
Parabéns pela maquina amigo proximo ano vou compra uma gsxs 1000 e estou aprendendo ingles entao vou me escrever no canal ! See you next yeas !
Obrigado por me deixar um comentário. Parece incrível, me avise quando for pegar a bicicleta Que combinação de cores você está recebendo?
White and blue
Where do I get those handle bars ?
Hey Sanjay, black ones are OEM (Rentjal Fat Bars), gold ones are Pro Taper Low Bend Carmichael model).
If you are referring to the clip ons the clip ons are Woodcraft. I have a video about them 😊
@@ToModorNottoMod I will check them out. Thank you...
@@sanjaydamodaran3219 my pleasure.
Sorry to tell you but I think you forgot the most important part, theres a bleeder on top of the thermostat where a huge air pocket gets stuck... apparently its extremely important
Thanks for the observation.
I do have to say that probably helps with bleeding the system easier but maybe doesn't prevent you from effectively bleeding the system.
I replaced the coolant about 1000 miles ago and my levels have been pretty consistent.
I am pretty sure eventually those air bubbles will end up in the coolant reservoir.
Thanks again
I went through the trouble of cracking the bleeder and I got no air bubbles right off the bat. I'd do it to make sure, but he's probably fine.
How many liter?
I used between 2 to 2.1 liters.
Ola meu nome é Márcio sou de Curitiba Paraná Brasil....tenho uma moto igual a sua uma gsx s1000 ... minha é porq a tua tem as caranagens branca é de fabrica .. as no brasil saiu na cor vermelho pu azul ou no fosco
Olá Marcio, obrigado pela mensagem. Eu pintei as partes brancas que o motor tem. O motor é vermelho e preto da fábrica. Saudações do Arizona.
All that talking and you couldn't show us how to remove the fairing. There's more to it than one screw!
Imagine how much longer the video would be if I’d do that 😂.
I didn’t use to put all the bolts because I was always removing and re-installing the fairing.
I hope the rest was useful. If not, sorry you have an amazing rest of your day sir!!