Easy to understand and straight to the point. I've watched about 10 different ballast application videos for EZ track and this by far was the best. Appreciate it!
I did not glue down my track before ballasting. And I found later that the glue from the ballast held the ez track in place fairly well when I tried to move the track around to make adjustments. Ha! But, if you decide to glue your ez track down beforehand, I would recommend using latex caulk.
Most of mine was not glued down when I ballasted. And I found later when I wanted to make adjustments that the glue for the ballast held the ez track very well.
Would you be able to do a video on your track wiring? I’m planning a layout but can’t find documentation on how to wire EZ track in a larger layout setting. Thinking it’s still soldering feeder wires to the rails but not sure! Thanks in advance!
Why didn't you take a brown felt pen and go along the edges of your truck to make them look weathered a dull finish brown felt pen run it along the side of your rails inside and out not the top and wow a finished weathered look
I just used easy track for the first time and really like it
Easy to understand and straight to the point. I've watched about 10 different ballast application videos for EZ track and this by far was the best. Appreciate it!
Wow thank you so much!
Your videos are too good to have only 25 subs you should definitely need more this videos are high quality so here's one more sub
Its simple. I see someone model the Western Maryland, and i subscribe to that person. Great video too!
Wow, great video, I will be using this on my ez track layout!
This video was really helpful😉
This will help a lot
Great tips! I will have to do this once I get my layout complete. will use the grey blend though.
Nice job on the ballasting.👍
If you run DCC on ez track, will you need more than one terminal to connect to a bus line? Or just one terminal section?
If I understand the question correctly, i think you'd still have to have more than one.
Question. Do u have to glue found ez track before ballasting? 1:10
I did not glue down my track before ballasting. And I found later that the glue from the ballast held the ez track in place fairly well when I tried to move the track around to make adjustments. Ha! But, if you decide to glue your ez track down beforehand, I would recommend using latex caulk.
Do you have to glue ez tracks down before ballasting?
Most of mine was not glued down when I ballasted. And I found later when I wanted to make adjustments that the glue for the ballast held the ez track very well.
Would you be able to do a video on your track wiring? I’m planning a layout but can’t find documentation on how to wire EZ track in a larger layout setting. Thinking it’s still soldering feeder wires to the rails but not sure! Thanks in advance!
I can put something together. Thanks for the idea and stay tuned!
No
Just plug it into the track that’s it
Now all we need is a ballast cleaner in Ho scale
The easiest way I found out is this
Why didn't you take a brown felt pen and go along the edges of your truck to make them look weathered a dull finish brown felt pen run it along the side of your rails inside and out not the top and wow a finished weathered look
Might look into that. Thanks!