System is perfect for beginners and is still found easily. I do however not recommend ever setting your Trains on carpeting for any reason, unless you really enjoy taking the trucks apart regularly to clean out all the fibers and hair.
Railfanning Michigan that actually a damned good idea!!!!! You need to submit that to bachmann!!!!! If you make an online petition to send to bachmann saying how many people would like them to make it, send me the link and I will sign the hell out of it!!!!!
The only way two or more locomotives that are programmed to the same address will run at the same speed is if they have the same motor and gearing. This is what I have experienced
I am running dcc sound and would like to know how I can create the Lashup you showed without all 3 engines sounding their horns at the same time. Thanks!
My controller doesn't work the ac adapter gets hot, but the controller won't light up and of course the trains won't move, Do I need another controller? Been trying to troubleshoot ran out of options.
Do you have any suggestions/advice on how to easily drill holes for the green turnout wires and the red power/feeder wires? Because it's not easy using an ordinary drill bit.
I tried to program two of my steam locomotives to run back to back with this method, but I can’t get them to run in the same direction on the same address. I don’t know what I’m doing wrong or what I’m supposed to do
I am using N-scale trains and Love that emergency stop help prevent collisions at crossing tracks ... Also I heard mix reviews on using DC analog engines with easy command number 10 button control that analog engines will burn out after long use. I tried running two dcc and one dc at once with good results so far but worry about that problem. Any one have any advise on that issue running dc on easy command analog # 10 control button?
Blinking usually indicates a power short somewhere on the track. Check to make sure all locomotives and rolling stock are on the rails and not derailed or fouling turnouts, all track connections are secure, and no metal objects (other than wheels) are in contact with the rails.
Would it work if I got a ez track terminal and modified the ends to where I could use other track to run my trains on? If that’s confusing here is an example: I take the terminal, and cut off the plastic joiners and use regular track not easy track for the rest of the layout. Would it work?
Hi Ray - Sorry for the late response. Which email did you try? If it was our service department, it's been closed since March 18 until at least April 6 due to mandated business closures within the state of Pennsylvania.
EZ command is used to control locomotives equipped with Digital Command Decoders. Bachmann does not produce Thomas items with Digital Command Decoders.
Since it appears as though Bachmann doesn't respond to any of the questions on here, perhaps a Bachmann DCC model railroader can help me? I bought a locomotive that has a factory setting of #15 and the EZ Command only goes up to #10 so, how do I reprogram the locomotive to run or is that not possible with the EZ Command system? Thanks in advance.
www.bachmanntrains.com/home-usa/images/E-Z_Command_instructions.pdf Refer to page 3 under "Reprogramming decoders with previously assigned digital addresses". All DCC decoders come addressed number 3 - this is the NMRA standard...
I think so it depends on what scale you have n, ho scale it will work no boster needed if you have o, and g scale it will work but you will need a boster
System is perfect for beginners and is still found easily. I do however not recommend ever setting your Trains on carpeting for any reason, unless you really enjoy taking the trucks apart regularly to clean out all the fibers and hair.
ya know what would be nice? Bachman ez traick flex track.
Railfanning Michigan that actually a damned good idea!!!!! You need to submit that to bachmann!!!!! If you make an online petition to send to bachmann saying how many people would like them to make it, send me the link and I will sign the hell out of it!!!!!
Sir, what you are describing is physically impossible because of the plastic roadbed.
@@Trainlover1995 what if they make the roadbed flexible rubber for that?
@@jonimendes6779 pretty sure that would ground the electricity in the rails and make it not work lol
Your thinking waaaayyy too ahead of current times
The only way two or more locomotives that are programmed to the same address will run at the same speed is if they have the same motor and gearing. This is what I have experienced
YES. A video that can help me with consisting Ho scale train
I am running dcc sound and would like to know how I can create the Lashup you showed without all 3 engines sounding their horns at the same time. Thanks!
that is so cool
Thanks so much Bachmann train
My controller doesn't work the ac adapter gets hot, but the controller won't light up and of course the trains won't move, Do I need another controller? Been trying to troubleshoot ran out of options.
Do you have any suggestions/advice on how to easily drill holes for the green turnout wires and the red power/feeder wires? Because it's not easy using an ordinary drill bit.
[thank, you for youre video👍 i, bought the same dcc controller]
wow thanks for the tips
You can gradually decrease the speed on your engine or engines.
yeah thanks for the tips
since this item has been discontinued is there any other option to add walkaround with this system?
NCE or digitrax offer easier and more portable walk around options.
I bought mine used on eBay and it works great
I bought one with a starter set
I got the newer E-Z Command and it runs amazing on my layout.
Can you run DCC train and DC train on the same track Each going at different speeds
Yes
although DC may get warm
Sounds like a real headache to just to break up a consist. Might just stick with one loco per train for awhile.
Need that and the Thomas with chuff whistle
Save your money. Get kato unitrack and digitrax. Be a lot happier and enjoy the hobby.
If running this DCC system can you program the DCC turnouts and The DCC crossover that are offered for this type of track
I tried to program two of my steam locomotives to run back to back with this method, but I can’t get them to run in the same direction on the same address. I don’t know what I’m doing wrong or what I’m supposed to do
Almost zero "electrical momentum" on my system. Not at all what I was expecting.
I am using N-scale trains and Love that emergency stop help prevent collisions at crossing tracks ... Also I heard mix reviews on using DC analog engines with easy command number 10 button control that analog engines will burn out after long use. I tried running two dcc and one dc at once with good results so far but worry about that problem. Any one have any advise on that issue running dc on easy command analog # 10 control button?
my bachmann ez conytroller started blinking and no trains are running after i unplugged it now its not working and my trains arent running,
Blinking usually indicates a power short somewhere on the track. Check to make sure all locomotives and rolling stock are on the rails and not derailed or fouling turnouts, all track connections are secure, and no metal objects (other than wheels) are in contact with the rails.
Press the stop button again, the trains should run.
Where the horn and can u hold it if u want
this is helpful
Is this USA ez command operated the same way with the UK one?
What happens if you are Running more than 1 Line ?
does this controller control Thomas and friends engines?
Would it work if I got a ez track terminal and modified the ends to where I could use other track to run my trains on? If that’s confusing here is an example: I take the terminal, and cut off the plastic joiners and use regular track not easy track for the rest of the layout. Would it work?
On section five, what set was train #7 because I have that set but it's broken so I would like to know?
(Aka Santa Fe #6067)
I need to know how to connect track without plastic ballast to the terminal rerailer
Use foam or cork roadbed under the non plastic normal track or anything non conductive to raise it to the height of the ballasted E-Z track.
Does this work in Kato n scale train set too
Nice
I still am confused with how to consist
How long does it take for Bachman to answer an email? Am having problem with my brand new Thunder Chief, sounds stop working about 10 minutes after.
Hi Ray - Sorry for the late response. Which email did you try? If it was our service department, it's been closed since March 18 until at least April 6 due to mandated business closures within the state of Pennsylvania.
It’s too bad these can’t control the sounds functions also.
Press the function button and different sounds will work as per # button except #10 for lights.
Does #9 or function 9 change the whistles if there was an option of changing whistles?
E-Z Command does not change CV values so no you cannot change the whistle.
Can Bachmann controller control locomotives form other brands like Kato as long as they are DCC?
Yes!
@@BachmannTrainsUSA Awesome. Thanks.
My Commander is not working properly
I have the 44901 controller, what is the "I/O" port used for??
a no longer (so very sad) available expander to give you 2 throttle controls
Can we use the E-Z Command Control Center on Bachmann Thomas trains?
EZ command is used to control locomotives equipped with Digital Command Decoders. Bachmann does not produce Thomas items with Digital Command Decoders.
Since it appears as though Bachmann doesn't respond to any of the questions on here, perhaps a Bachmann DCC model railroader can help me? I bought a locomotive that has a factory setting of #15 and the EZ Command only goes up to #10 so, how do I reprogram the locomotive to run or is that not possible with the EZ Command system? Thanks in advance.
www.bachmanntrains.com/home-usa/images/E-Z_Command_instructions.pdf
Refer to page 3 under "Reprogramming decoders with previously assigned digital addresses". All DCC decoders come addressed number 3 - this is the NMRA standard...
bachmanntrains Done that countless times & "no-go". So, either the Bachmann system cannot control the Atlas locomotive or I bought a paper weight???
Bernhardt Heckendorn Did you find a fix? I'm hoping not to run into the same thing
It's possible to do that just READ THE MANUAL! That came with it
Take it to a hobby shop with program track they change the addresses
Does this work in N scale too
Yes it does, the "golden spike" is an n scale starter set that comes with E-Z command
can I use this system with Hornby DCC locomotives? please reply. thanks from Dylan Palombo.
Yes. Anything that uses DCC can be run with this.
I think so it depends on what scale you have n, ho scale it will work no boster needed if you have o, and g scale it will work but you will need a boster
Can steam go on with diesel?? Doe it work
Yes
Nickey Deleon 0:38
Cool video I couldn't do better my self.
What scale is this?
Bachmann's E-Z Command works on a variety of scales. This demonstration video is using HO scale.
@@BachmannTrainsUSA Thanks. Will it also work with other makes like Kato and Atlas? I am looking at a universal DCC controller and EZ looks appealing.
@@SwapnilBhartiya Yea
Not at this time
@@ethanstout2137 yeah
Loco
D
ummm ok d
Ho