As an industrial engineer ,I cant feel but admiration and respect to these guys that with simple devices as lathe, welding, etc can create those so complicated instruments as a power press. My best regards from Venezuela.
How I wish I could have seen the Clutch assembly being made! This machine is a titan, and it will be invaluable to engineering students. You and your team are incredible.
It's marvellous what these guys can produce with antiquated equipment and lots of skill. They have not a care in the world about health and safety equipment or regulations.
yeah, the guy handfeeding the face cutter with a sledgehammer is leaving a pretty nice finish, and my god are those torch cuts fast and straight on the triangle cuts.. I think the designer should have done bevels or spacers for the welds to be as strong as the thick plates, as others have mentioned.. but yea, awesome work by the guys
I went through welding school here in Canada and we were taught to angle the cutting torch tip slightly in the direction it's cutting to preheat the incoming material.
Wow this in Australia world be crazy account of money and take ages to have made outstanding work makes me want to visit just to watch these and things like it built
Кстати да: по наружке следовало бы разделку сделать на 15-20мм, тем паче, что у них автоген. Но на 8:04 когда они поднимают раму, видно, что мясца на шов изнутри они всё же подкинули. Думаю: 50 тонн такой пресс даст...
@@Supervisor000там кривая станина до ужаса, все на глаз. Это не просто пресс, это пресс-штамп, там геометрия станины должна быть на высоком уровне,т.к. много движущихся механизмов и узлов. А тут даже угольник один раз в кадре появился, и то он им непонятно что мерял, и сварка на ржавчину.
I would have to guess the machining or fabrication tolerances aren't super tight? Given the equipment, and the work space they have to work with, and what they can afford to produce them for--they do a good job! I would also have to guess they have been making these presses for quite a while so there must be a continuing demand for them. Its easy to criticize what they do given the level of our equipment and technology but how well would we do if the shoe was on the other foot?
Кроваво красный цвет покраски пресса даëт понимание всей картины процесса произведëнных работ . Отношение к тех. безопасности нулевое , надежды на светлое будущее 100%. Вы молодцы так держать ! ЙйаааХууу !
Absolute garbage weld joints. No joint prep, no chamfers and then grinding away base material around the welds too. That thting is held together with hopes and dreams.
If you want a machine like this and you find a properly build one to expensive, than you can buy this scrapheap of botched together steel parts. It is simple; if you don't want to pay nothing, you will get nothing. Not 2 machines are exactly alike, no interchangeable parts, no safety systems, a disaster waiting to happen. But there are. Seemingly enough people to find wo want to buy this junk.
@@JaakkoF I think it's a question of what can you afford, no matter how long it holds together - it can always be repaired (by the same team 🤭) How can street made machines be better than factory made? They can't. How primitive can you be to produce a quality item? Well, not THAT primitive I guess....
These may be primitive conditions compared to the West, but they are modern out there. Plus they get they job done and everyone is earning a living. No unemployment or sick pay, just earn and live. The finished product must sell too, they don't build them just for fun.
I just saw my first bandage on a guys foot ( using the term bandage was being generous ) amazing the lack of safety equipment, eye protection , hearing etc , simply amazing
Waarom draaien ze de draaibanken niet om ? De operator staat letterlijk met de rug tegen de muur ,als er iets gebeurd hij kan niet weg De aan en uitschakelaar niet binnen handbereik ,laat staan een goede noodstop Zelfmoord actie ,erg heel erg onvoorstelbaar Om van de rest nog maar te zwijgen ,een klein boutje om een hef ketting aan elkaar te maken Griezelig hoe die mensen moeten werken geen veiligheids schoenen geen handschoenen
And I notice few of the welders had proper Eye Protection and yet for what this power press cost you would think the management would provide for their worker's.
Flange missing 2 bolts 24:50 Tacked together no prep on welds. I know they don't want to put a hundred pounds of rod into that thing, but missing 2 bolts out of 8 is really looking bad. Overall, they made the thing in a hole in the wall using ancient tools, so I'm thinking good job.
nice job and that guy cutting the strap was awkward lol interesting choice of paint job 👍 and if that's 300 tons surprised that truck was able to move js and all looks good but couldn't put a new motor on it jw 😎😎
Это Металлолом, а не штамповочный пресс. Сварные работы это "шедевр" 😂 Станина которую они сваривают на глаз, абсолютно не имеет ни какой геометрии, для штамповочного пресса это же не важно 😅😂😂
Ну да, непорядок... Вот у нас заводы были - любо-дорого посмотреть: отдельный корпус для руководства, отдельный корпус для парторганизации, отдельный корпус для бухгалтерии, отдельный корпус для ИТР, отдельный корпус для хозсужб, отдельный корпус для секретного отдела, и т.д. и т.п. Ну а работяги, откровенно говоря, на таких же трёх метрах и работали...
@@бабай-ж3м У нас - это там, где петроградский еврей, наркоман и гомосексуалист поёт глумливую песенку: "Здесь мерилом работы считают усталость!" Вот граждане понаслушаются таких песенок, и думают: а ведь верно толкуют, хватит с нас этого домостроя! - эпоха сталинских шараг должна уйти в небытиё, и вообще всем надо становиться швабодными и незалежными; поэтому выдайте нам халатик беленький (как у медсестрички, чтобы попкой перед начальством было красивше крутить), кабинетик просторненький, да желательно этажом повыше-повыше, много-много книжных полок и шкафов, чтобы все видели, какие мы умные и начитанные, кульман, и желательно Роботроновский, и стол побольше, и станем мы номенклатурой, а чтобы нам легче жилось-былось, квартирку без очереди, мы не желаем ютиться в "людских", и машинку нам с водителем пожалуйста, ой, то есть не пожалуйста, а плиз!.. Ну и там всякого по мелочам: дачу, детишкам путёвочку в лагерь, квартирку с лишними метриком, чтобы мы собачку породистую завели. Можно, конечно, ещё еду из спецраспределителя получать, но тут надо было бы родиться в семье председателя какого или директора, тут уж баста: закон надо уважать... А кто будет работать, спрашиваете? - известно кто: непереводимый мужик, мужик-то он завсегда поглупее будет, он и шуму и грязи не боится, он неприхотлив как в жилье, так и в еде, его ни учить, не лечить не нужно... Вот по такому образу можете идентифицировать это самое: *у нас.*
Heck, I wanted to see them move that pallet truck with that bedplate on it! They edited that out...Lol...good work with the body filler prepping... RED? not my personal choice and another shipment with a top-heavy load unsecured... well, I guess it matches the rest of the work!
Yeah I could tell that also. But wasn't it funny how the truck driver was going to take that guy on top for a long ride, lol. I also didn't mention that the press wasn't even secured to the truck, or the fact I think that truck wasn't even legal to haul that much weight. Did you notice when they were lifting the press off the ground the main beam for the crane was bending. I don't see why they are wearing sandals and not steel toed boots. Was I had a laugh at the end watching that guy screaming to stop.
Und wie man wieder gesehen hat nicht wie die maschine leuft immer nur videos wie alles zusammen gebaut wird aber Test run nö nixs.... Könnte auch ne Pap kartong zusammen bauen mit irgenteiner funksjon aber man sieht es nicht. :/
300 ton refers to the ram force, not the weight of the machine. In other words the maximum punching pressure it can exert. Even so, you are right to laugh because a mechanical press of this physical size, constructed from steel, especially with the poor quality welds they achieved, will be lucky to exert a force of even 100 tons
No way is that press able to exert a punching pressure of 300 tons. It’s physically too small and flimsily built. I don’t believe that press is capable of punching a 4”(102”) diameter hole through 1” (25.4mm) thick mild steel, which needs a force of approx 300 tons.
As an industrial engineer ,I cant feel but admiration and respect to these guys that with simple devices as lathe, welding, etc can create those so complicated instruments as a power press. My best regards from Venezuela.
One thing i would say this country is the best at recycling ship steel....
Thanks for the feedback waiting for next video
@@wowcreativethings . . Bering problem .
Let's appreciate them for an effort to convert scrap ship to something useful.
Thanks for the feedback waiting for next video
Hats off to these hard working men
How I wish I could have seen the Clutch assembly being made! This machine is a titan, and it will be invaluable to engineering students. You and your team are incredible.
It's marvellous what these guys can produce with antiquated equipment and lots of skill. They have not a care in the world about health and safety equipment or regulations.
I think the absolute highlight of this video is the Elf shoes the welder was wearing and the snazzy black dress socks he wore for the occasion
Thanks for the feedback waiting for next video
He knew the assignment. If you know your going to be on film, may as well snazz yourself up a bit.
اعظم ناس في الصناعه الثقيله العظمي باقل الوسائل والمعدات .شعب مكافح وطموح وقوي .اللله معكم يا شباب والسلام عليكم من امريكا
Thanks for the feedback waiting for next video
Переезжайте в Россию. Америкаская мечта теперь в России.))) Мир вашему дому.)
alah is gay
they just need lathe, welding machine, 5 Ton crane n some skilled man. amazing
Thanks for the feedback waiting for next video
yeah, the guy handfeeding the face cutter with a sledgehammer is leaving a pretty nice finish, and my god are those torch cuts fast and straight on the triangle cuts.. I think the designer should have done bevels or spacers for the welds to be as strong as the thick plates, as others have mentioned.. but yea, awesome work by the guys
I went through welding school here in Canada and we were taught to angle the cutting torch tip slightly in the direction it's cutting to preheat the incoming material.
Thanks for the feedback waiting for next video
The truck at the end, cult! Thanks a lot. Great!
Thanks for the feedback waiting for next video
Wow I actually saw real shoes on a couple of guys!
Thanks for the feedback waiting for next video
these guys will conquer the galaxy one day and with their bare hands
Thanks for the feedback waiting for next video
@@sradowazyszczadoniecki6567 Lololol lololol
Wow this in Australia world be crazy account of money and take ages to have made outstanding work makes me want to visit just to watch these and things like it built
Thanks for the feedback waiting for next video
They build a nuclear bomb in the same way.. with machine parts discarded in the Netherlands.
Лист 40мм варим без разделки кромок, с одной стороны в один проход. Пакистан нанотехнолджи инкорпорейтед.
Thanks for the feedback waiting for next video
Кстати да: по наружке следовало бы разделку сделать на 15-20мм, тем паче, что у них автоген.
Но на 8:04 когда они поднимают раму, видно, что мясца на шов изнутри они всё же подкинули.
Думаю: 50 тонн такой пресс даст...
You have to wonder what 'nanotechnology' has to do with 40mm thick sheets of steel?!
@@pcka12Баран, это метафора.
Ты такой же пакистанец как эти из видео?😂
@@Supervisor000там кривая станина до ужаса, все на глаз.
Это не просто пресс, это пресс-штамп, там геометрия станины должна быть на высоком уровне,т.к. много движущихся механизмов и узлов. А тут даже угольник один раз в кадре появился, и то он им непонятно что мерял, и сварка на ржавчину.
Вал, шлифованный болгаркой. Ни одной фаски при сварке. Сборка на полу в песке. Это одноразовый станок. «Как превратить один металлолом в другой»
Thanks for the feedback waiting for next video
Not everyone manufactures to American standards and even here. Just geter done ! And most of the time it works for them.
Грузовичок красивый. Стимпанк.)
Thanks for the feedback waiting for next video
Y'all bring the words "safety squint" to an all new level. wow that poor pallet jack has seen better days lmao. That truck looks so cool.
Thanks for the feedback waiting for next video
I would have to guess the machining or fabrication tolerances aren't super tight? Given the equipment, and the work space they have to work with, and what they can afford to produce them for--they do a good job! I would also have to guess they have been making these presses for quite a while so there must be a continuing demand for them. Its easy to criticize what they do given the level of our equipment and technology but how well would we do if the shoe was on the other foot?
Кроваво красный цвет покраски пресса даëт понимание всей картины процесса произведëнных работ . Отношение к тех. безопасности нулевое , надежды на светлое будущее 100%. Вы молодцы так держать ! ЙйаааХууу !
Thanks for the feedback waiting for next video
Safety sandals
Thanks for the feedback waiting for next video
41:09
Vベルトの軋み音が日本の競馬で使われる「ファンファーレ」みたい😂
Thanks for the feedback waiting for next video
Absolute garbage weld joints. No joint prep, no chamfers and then grinding away base material around the welds too. That thting is held together with hopes and dreams.
Thanks for the feedback waiting for next video
Yes, clean bevelling the edges is key to a decent strong weld.
If you want a machine like this and you find a properly build one to expensive, than you can buy this scrapheap of botched together steel parts.
It is simple; if you don't want to pay nothing, you will get nothing.
Not 2 machines are exactly alike, no interchangeable parts, no safety systems, a disaster waiting to happen.
But there are. Seemingly enough people to find wo want to buy this junk.
Chill out Captain America
@@JaakkoF I think it's a question of what can you afford, no matter how long it holds together - it can always be repaired (by the same team 🤭)
How can street made machines be better than factory made? They can't.
How primitive can you be to produce a quality item? Well, not THAT primitive I guess....
대단한 사람들이네요 !
Thanks for the feedback waiting for next video
Супер красивая изделия,
Красата..маладци..❤
Thanks for the feedback waiting for next video
These may be primitive conditions compared to the West, but they are modern out there. Plus they get they job done and everyone is earning a living. No unemployment or sick pay, just earn and live. The finished product must sell too, they don't build them just for fun.
Strange you defend them without warrant
Thanks for the feedback waiting for next video
Thanks for the feedback waiting for next video
This is the whole point. It takes as much effort to do it wrong as it does to do it correctly.
49/12 For what use of this heavy machinery ?????
Yeah. I'm sure those welds will hold up
Thanks for the feedback waiting for next video
How many tons it is weight?
where is the coolant????
How much to buy one USD$
Please reply me: How this 'TOSTAN ITEM' load to trasport ?????? (India))
Get more information you can take WhatsApp number in the description
مدهيل و جميل❤❤❤
Dunia nu ke dhikha rhi ho??
Apni gribi
Wow
Agr kam krny ka dumm ho to gribi or ameeri koi mannnii ni rakhti.. skills honi chahiye khud m 👌✅️👍
13:02 my guy forgot to wear a safety sandal
All with a lathe, grinder and a gas axe with some recycled material in an alley
Thanks for the feedback waiting for next video
love hearing the sped up music, its like sing-a-long with a minion 🤣🤣
Thanks for the feedback waiting for next video
أرى أن دولة الباكستان من أفضل دول العالم من حيث الصناعات والمعالجة اليدوية لأي تقنيات صناعية وحرفيه
Thanks for the feedback waiting for next video
Тонкая подгонка кувалдой, подача резца молотком и ладонь вместо сварочной маски улыбнули)))) Зато грузовик красивый))
Thanks for the feedback waiting for next video
I love watching those videos, but I also cannot stop wondering what the life expectancy is for the men working on those yards.
Anybody knows ?
Thanks for the feedback waiting for next video
I just saw my first bandage on a guys foot ( using the term bandage was being generous ) amazing the lack of safety equipment, eye protection , hearing etc , simply amazing
Thanks for the feedback waiting for next video
Seus vídeos são muito bom.sempre que posso eu assisto são Paulo Brasil
Thanks for the feedback waiting for next video
Like building Stonehenge out of iron!
Thanks for the feedback waiting for next video
Hi
Can I have any contact information to that workshop? Naeem brothers. I need some information and maybe I can make an order to them.
I have given the number in the description
Waarom draaien ze de draaibanken niet om ? De operator staat letterlijk met de rug tegen de muur ,als er iets gebeurd hij kan niet weg
De aan en uitschakelaar niet binnen handbereik ,laat staan een goede noodstop
Zelfmoord actie ,erg heel erg onvoorstelbaar
Om van de rest nog maar te zwijgen ,een klein boutje om een hef ketting aan elkaar te maken
Griezelig hoe die mensen moeten werken geen veiligheids schoenen geen handschoenen
Amazing work. UK. Well done.
Thanks for the feedback waiting for next video
And I notice few of the welders had proper Eye Protection and yet for what this power press cost you would think the management would provide for their worker's.
Thanks for the feedback waiting for next video
Got to give it to them but why aren't they building space craft?
Thanks for the feedback waiting for next video
8:47 - вот это автоподача 😆😆😆
Thanks for the feedback waiting for next video
His name is Otto and his job is auto feed! 😂
Nary a safety item in use ANYWHERE.
Thanks for the feedback waiting for next video
9:00 best flange facing tool😂😂😂
Thanks for the feedback waiting for next video
Where is the union shop safety steward?
Thanks for the feedback waiting for next video
Flange missing 2 bolts 24:50 Tacked together no prep on welds. I know they don't want to put a hundred pounds of rod into that thing, but missing 2 bolts out of 8 is really looking bad. Overall, they made the thing in a hole in the wall using ancient tools, so I'm thinking good job.
Thanks for the feedback waiting for next video
@@wowcreativethings Really...give a different response. Nobody cares when we all see the same.
Am I the only one who noticed how much the "boring bar" is bowed in the middle? 8:49
Thanks for the feedback waiting for next video
Yes I noticed and also realised that it probably doesn't matter at all. It's all about the distance of the tip of the tool to the centerline.
Administratif ❤
Thanks for the feedback waiting for next video
nice job and that guy cutting the strap was awkward lol interesting choice of paint job 👍 and if that's 300 tons surprised that truck was able to move js and all looks good but couldn't put a new motor on it jw 😎😎
Thanks for the feedback waiting for next video
@@wowcreativethings welcome :)
Three hundred tons is the amount of force that the press can exert, not its weight.
300-tons is not the press weight! It's the working tonnage for the presswork, e.g. stamping, shearing, blanking, etc. lol
Maaşallah.
Thanks for the feedback waiting for next video
Это Металлолом, а не штамповочный пресс.
Сварные работы это "шедевр" 😂
Станина которую они сваривают на глаз, абсолютно не имеет ни какой геометрии, для штамповочного пресса это же не важно 😅😂😂
Thanks for the feedback waiting for next video
2 week and press ready. Very good job
Thanks for the feedback waiting for next video
Hələ bunlar geri qalmış texnologiya ilə işləyirlər.Əllərində təzəsi olsa nələr düzəldərlər.👍
Thanks for the feedback waiting for next video
¡Extraordinario trabajo, en definitiva son muy buenos en lo que hacen! Saludos desde Honduras.👍👍👍👏👏👏👈
Thanks for the feedback waiting for next video
Good Job boys!!! Greetings from Hungary!
Thanks for the feedback waiting for next video
No preheating?
Thanks for the feedback waiting for next video
This week on OSHA nightmares . . . . .
Thanks for the feedback waiting for next video
What the world looked like before the invention of the wire brush and the damp cloth, lol.
Thanks for the feedback waiting for next video
None of it is beveled but they grind the little bit of weld holding it completely away.
Thanks for the feedback waiting for next video
What about some guards on those drive wheels?
Thanks for the feedback waiting for next video
Я удивлен, на заводе шириной три метра ,сделали такой станок!!!
Thanks for the feedback waiting for next video
Ну да, непорядок...
Вот у нас заводы были - любо-дорого посмотреть: отдельный корпус для руководства, отдельный корпус для парторганизации, отдельный корпус для бухгалтерии, отдельный корпус для ИТР, отдельный корпус для хозсужб, отдельный корпус для секретного отдела, и т.д. и т.п. Ну а работяги, откровенно говоря, на таких же трёх метрах и работали...
@@Supervisor000 И где это у Вас?
@@бабай-ж3м У нас - это там, где петроградский еврей, наркоман и гомосексуалист поёт глумливую песенку: "Здесь мерилом работы считают усталость!"
Вот граждане понаслушаются таких песенок, и думают: а ведь верно толкуют, хватит с нас этого домостроя! - эпоха сталинских шараг должна уйти в небытиё, и вообще всем надо становиться швабодными и незалежными; поэтому выдайте нам халатик беленький (как у медсестрички, чтобы попкой перед начальством было красивше крутить), кабинетик просторненький, да желательно этажом повыше-повыше, много-много книжных полок и шкафов, чтобы все видели, какие мы умные и начитанные, кульман, и желательно Роботроновский, и стол побольше, и станем мы номенклатурой, а чтобы нам легче жилось-былось, квартирку без очереди, мы не желаем ютиться в "людских", и машинку нам с водителем пожалуйста, ой, то есть не пожалуйста, а плиз!.. Ну и там всякого по мелочам: дачу, детишкам путёвочку в лагерь, квартирку с лишними метриком, чтобы мы собачку породистую завели. Можно, конечно, ещё еду из спецраспределителя получать, но тут надо было бы родиться в семье председателя какого или директора, тут уж баста: закон надо уважать... А кто будет работать, спрашиваете? - известно кто: непереводимый мужик, мужик-то он завсегда поглупее будет, он и шуму и грязи не боится, он неприхотлив как в жилье, так и в еде, его ни учить, не лечить не нужно...
Вот по такому образу можете идентифицировать это самое: *у нас.*
Следующая серия где у этого грузовика со станком ось на пополам сломалась😅
Thanks for the feedback waiting for next video
Heck, I wanted to see them move that pallet truck with that bedplate on it! They edited that out...Lol...good work with the body filler prepping... RED? not my personal choice and another shipment with a top-heavy load unsecured... well, I guess it matches the rest of the work!
thanks for the feedback
How far did the truck get before snapping its axles?😅
Thanks for the feedback waiting for next video
built to last
NOT!!!!
Thanks for the feedback waiting for next video
yeah bro your eyes are h urting because of the welding 36:20 wear a welding helmet or even the ones you hold
Thanks for the feedback waiting for next video
that is a small shaper but it dose the job
Thanks for the feedback waiting for next video
there is a thing called BEVEL you know
thanks for the feedback
Stupid high speed playback ruins the video. Really would have wanted to watch it.
Thanks for the feedback waiting for next video
Made to a tolerance of whatever, that’ll do😂
Yeah I could tell that also. But wasn't it funny how the truck driver was going to take that guy on top for a long ride, lol. I also didn't mention that the press wasn't even secured to the truck, or the fact I think that truck wasn't even legal to haul that much weight. Did you notice when they were lifting the press off the ground the main beam for the crane was bending. I don't see why they are wearing sandals and not steel toed boots. Was I had a laugh at the end watching that guy screaming to stop.
Thanks for the feedback waiting for next video
Wilds!
Làm tốt lắm các bạn, tôi đến từ Việt nam
Thanks for the feedback waiting for next video
ЧУДОТВОРЦЫ.Такая братва без хлеба насущного не останется. Всех вам благ за ратные труды.
Thanks for the feedback waiting for next video
❤❤
Thanks for the feedback waiting for next video
Und wie man wieder gesehen hat nicht wie die maschine leuft immer nur videos wie alles zusammen gebaut wird aber Test run nö nixs.... Könnte auch ne Pap kartong zusammen bauen mit irgenteiner funksjon aber man sieht es nicht. :/
thanks for the feedback
❤❤
Thanks for the feedback waiting for next video
👍👍👍👍👍👍👍👍👍👍👍❤️❤️❤️❤️❤️
Thanks for the feedback waiting for next video
That guy with the mallet looked like he was forcing something into proper alignment.....
Thanks for the feedback waiting for next video
Where did you come up with 300ton press 😂😂???
For reference, the crane used to lift the press is only rated for 5 tons!
Thanks for the feedback waiting for next video
300 ton refers to the ram force, not the weight of the machine. In other words the maximum punching pressure it can exert. Even so, you are right to laugh because a mechanical press of this physical size, constructed from steel, especially with the poor quality welds they achieved, will be lucky to exert a force of even 100 tons
@@djr2078 why is 1 +1 =2 and not 11
@@wawerukamau1260 because god sat down for almost 3 hrs and told him why he’s wrong
There are some people that really lack common sense 😕
Some of the roughest work i have ever seen..perfect example why to never buy junk from these countries
Thanks for the feedback waiting for next video
@wowcreativethings 🤣🤣🤣🤣🤣🤣
I wonder what this youtube money is financing?
Thanks for the feedback waiting for next video
Eso se llama explotación laboral
Thanks for the feedback waiting for next video
No way is that press able to exert a punching pressure of 300 tons. It’s physically too small and flimsily built. I don’t believe that press is capable of punching a 4”(102”) diameter hole through 1” (25.4mm) thick mild steel, which needs a force of approx 300 tons.
Thanks for the feedback waiting for next video
Молодцы! На санкции, насрали! Храни вас Бог!
Thanks for the feedback waiting for next video
You shouldn't need a mall if the cut was done right
Thanks for the feedback waiting for next video
👍
Thanks for the feedback waiting for next video
голыми руками в шлёпанцах на улице собрали станок... я в ах
Thanks for the feedback waiting for next video
Look at the wobble in that boring shaft. 😅
Thanks for the feedback waiting for next video
Mother, are you there?
Thanks for the feedback waiting for next video
Arbeitsschutz scheint völlig unbekannt zu sein.
Thanks for the feedback waiting for next video
13:02, that's what you get for wearing bathroom slippers to work
Thanks for the feedback waiting for next video
Lubricant? Wtf is that?!
Thanks for the feedback waiting for next video