Well,Thank you very much,Mark.Your video clip,gave me the confidence to undertake a DIY job,over my constant dripping shower head.No peace,at night.I was keen to Do a good job.Well,I am thrilled. I have successfully stopped the constantly dripping shower,and how good,to have a peaceful night.No water wastage,either,in respect of the environment.Alot of money saved,over not using plumbers,and a Great sense of Self Satisfaction.
Thank you for the detailed video. Mine tap is inside the tiles that normal spanner can’t reach, that I can’t screw it off the wall, what tool would you suggest to use
Great video, however I can’t get the bonnet off covering the tap. It doesn’t just unscrew like yours did. It is smooth and I can’t get a grip to undo it, it is too tight. Any ideas on how to get this off? Thanks
I found another video on TH-cam that showed using a Strap Wrench to get the bonnet cover off. After buying the Strap Wrench at Bunnings for $7.25 I successfully got it off. 👍🏻
Hi, changed it but still it’s dripping. I need to tighten tap very hard to stop the water . Please suggest me some suggestions. Its same exact tap like this ! Thanks .
I would need more information to help you. Is the tap leaking from the shaft of the tap? Or dripping from the faucet? Did you change both washers? ie did you change the wrong one? The washer seats against the metal at the back of the tap you would need to check if that is still Flat or if there is debris in there. Did the oring move out of place as you fitted it??
I need to only change something in my hot water kitchen tap and I have shut of supply to the water heater and so no water is coming out from hot taps. Can I proceed to unscrew the hot water tap in my kitchen? Or do I need to completely shut off the main water?
This depends on your tap and other plumbing in your home. To test all you need to do is turn on the hot water tap and see if any water comes out. But being that you don’t want hot water having the possibility to come out under pressure why not turn off at the main to be safe. MRT
The sealant is probably for what is called the vapor barrier. If they are actually using the vapor barrier. They seal around outlets and light sockets too.
Yes that is a vapor barrier. Just cut it out with a sharp knife. Modern houses are sealed so they are better insulated. Not gaps through the wall everywhere.
Hi. No not all the same size. Most are though. There is a standard size but of course some brands do different so you have to buy there specific washers. MRT
It will be at a point where there are water fittings. Most likely under Kitchen sink or in laundry or a bathroom. It can still also be outside. If you cannot find it ask a neighbor. MRT
Hi Mark, Great video (as usual). I need to ask, you have replaced both hot and cold water washers, but you only turned off a cold water supply if I am not mistaken. Don't you have to shut off hot water also? Thx for sharing mate.
Hi. When you turn off the main supply to the house that shuts off both hot and cold water. If you are turning the water off under a sink then you need to turn off both hot and cold water. MRT
Hi Mark, do you think every tap has washer? I could not find the washer when I opened the tap in my bathroom, and when I installed it again, it no more work anymore. What's up this problem? Thanks.
Yes they do. every Tap will either have a Cartridge or a washer. It maybe broken or missing, but it should be there. MRT See this video to service a cartridge: th-cam.com/video/sEu2r-qWzRo/w-d-xo.html
Turns out the silicon is a vapor barrier. There to stop any water getting into the walls. Also there when you have a higher rating insulation to stop drafts or air leaking
@@Marksreviewsandtutorials Thanks Mark - I am also in Australia same as you, so I wasn't surprised to find it. Did you eventually bother replacing it behind your tap fittings after you replaced the washers?
If you have changed the washer and it still leaks?. Two thoughts if it is a mixer tap change the other tap as well. If not then the tap may need to be reseated. You can get kits at the hardware store. Check where the washer seats inside the Tap. This needs to be smooth.
Also, check that your tap doesn't have other washers. Remember that red ring seal? Also, if you withdraw the stem from the assembly, you may find a little black O ring, that may need replacing.
@@arthurbelotti8330 If you have changed the washer and it still leaks?. Two thoughts if it is a mixer tap change the other tap as well. If not then the tap may need to be reseated. You can get kits at the hardware store. Check where the washer seats inside the Tap. This needs to be smooth. If not smooth then re seat it.
The camera person and their use of the bus is fantastic. I thought I saw it, rewound it twice to confirm. It’s great
That was my son having some fun. 😳
Thank you sir, I owe you my life 🥺
you have such good 'Dad teaches you how to fix things' energy 💕
Thanks for your kind comment.
I am so glad that it helped you fix your tap. MRT
Well,Thank you very much,Mark.Your video clip,gave me the confidence to undertake a DIY job,over my constant dripping shower head.No peace,at night.I was keen to Do a good job.Well,I am thrilled. I have successfully stopped the constantly dripping shower,and how good,to have a peaceful night.No water wastage,either,in respect of the environment.Alot of money saved,over not using plumbers,and a Great sense of Self Satisfaction.
Well done Sally. Good on you for having a go.
I’m so glad the video helped you.
MRT
Thanks Mark! I was so excited I forget to check what type of valve/washer I needed and off to shop I went! Bought all the different types and sizes 😂
Your kid is hilarious! Thank you for this video!
Thank you I did this first time on my own !! No more drips 💧
Thanks!
thank you so much.... Easy to follow. No more dripping taps. love your work.
Also cool that i had same taps so made it so much more easier for me.
😃👍
So Glad it helped
Very good information
Thanks for this video, I managed to replace a broken spindle and save $350 in the process. Cheers
Good on you 😃 MRT
Thank you! Just changed all my taps washers by myself well also with your help! Thanks !
Well done. 👌 MRT
Saving this video for the next time I have to do this and have forgotten what to do.
Thanks alot. Helped me with my house. Saved me calling a plumber
Thanks bro, good reference to jog the memory.
This is an amazing video. Thank you.
Thank you, you are amazing.
Thanks for the video mate, very helpful
Great simple and to the point..
Thank you 👍👍
Thanks, always tricky to just get the handle off with so many different designs!
Thank you for your help. Really appreciate.
Thankyou! Same tap type as we have. Looking forward to no more annoying drippy tap on the weekend :)
Great help thanks 🇦🇺
Thank you. It helped me to fix it.
Glad it helped
Great guide
Glad it was helpful!
Thanks for this video mate legend.
Thanks Mark! life saver!!!
Cheers. Thanks for making this vid. 👍
Great video buddy! 👌🏾
i got you your 1k likes, thank you
Like the bus lol
Thanks mate, great job
Thank you!!!
Thank you 😊
Thank you great video
Where can I get the seal washer ?
Any and every hardware store will have these. What country are you in?
Thanks mate
I love you Mark ❤️❤️❤️
Thank you for the detailed video. Mine tap is inside the tiles that normal spanner can’t reach, that I can’t screw it off the wall, what tool would you suggest to use
Have a look at the links in the description I have some tools linked there
Great video, however I can’t get the bonnet off covering the tap. It doesn’t just unscrew like yours did. It is smooth and I can’t get a grip to undo it, it is too tight. Any ideas on how to get this off? Thanks
I found another video on TH-cam that showed using a Strap Wrench to get the bonnet cover off. After buying the Strap Wrench at Bunnings for $7.25 I successfully got it off. 👍🏻
legend
Thank you
Azkaban 29 👍
Hi, changed it but still it’s dripping. I need to tighten tap very hard to stop the water . Please suggest me some suggestions. Its same exact tap like this ! Thanks .
I bought the copper or metal one . Do i need to replace with one u used here ? Plastic and rubber material ??
I would need more information to help you. Is the tap leaking from the shaft of the tap? Or dripping from the faucet? Did you change both washers? ie did you change the wrong one? The washer seats against the metal at the back of the tap you would need to check if that is still Flat or if there is debris in there. Did the oring move out of place as you fitted it??
I need to only change something in my hot water kitchen tap and I have shut of supply to the water heater and so no water is coming out from hot taps. Can I proceed to unscrew the hot water tap in my kitchen? Or do I need to completely shut off the main water?
This depends on your tap and other plumbing in your home.
To test all you need to do is turn on the hot water tap and see if any water comes out.
But being that you don’t want hot water having the possibility to come out under pressure why not turn off at the main to be safe. MRT
The sealant is probably for what is called the vapor barrier. If they are actually using the vapor barrier. They seal around outlets and light sockets too.
Hi there . I Have a dripping tap but the tap bell is siloconed to the tile !!
how do I loosen them please.thanks 🤔
Yes that is a vapor barrier. Just cut it out with a sharp knife. Modern houses are sealed so they are better insulated. Not gaps through the wall everywhere.
@@Marksreviewsandtutorials I tried a Stanley blade can't get in there anywhere
Hi, Mark. Do I need to reapply silicon after changing the washer?
Yes that is a vapor barrier. Modern houses are sealed so they are better insulated. Not gaps through the wall everywhere.
Hey Mark what type of wrench did you use?
I have found a close replacement, mine seems not available anymore. See the link in the description of the video. MRT
What’s the name of the tool you used to remove the whole assembly? Thanks
They don’t appear to be available to buy anymore sorry.
Are all washers the same size in circumference?
Hi. No not all the same size. Most are though. There is a standard size but of course some brands do different so you have to buy there specific washers. MRT
Where can I find the main water supply if I live in an apartment?
It will be at a point where there are water fittings. Most likely under Kitchen sink or in laundry or a bathroom.
It can still also be outside. If you cannot find it ask a neighbor. MRT
Whay was the tool called at 2:50?
I cannot find them to buy anymore MRT
What about the ‘o’ rings in the spindle, mine is still dribbling over the top when I turn it on?
Same here….
Are you aussie ? If so can you buy those washers from bunnings?
You can buy through the links provided in the description or Yes you can. The local hardware store will have the correct ones for your country too.
What is the name of the wrench you used ?
I have found a close replacement, mine seems not available anymore. See the link in the description of the video. MRT
Get a 1/4 turn ceramic spindle insert instead of the old washers. Available online in Aus.
Hi Mark, Great video (as usual). I need to ask, you have replaced both hot and cold water washers, but you only turned off a cold water supply if I am not mistaken. Don't you have to shut off hot water also? Thx for sharing mate.
Hi. When you turn off the main supply to the house that shuts off both hot and cold water. If you are turning the water off under a sink then you need to turn off both hot and cold water. MRT
@@Marksreviewsandtutorials Thank you ! Got it now! Once you stop pressure from mains, there is no pressure in hot water tank either. Silly me!!!
VanClaaude 👍
@@Marksreviewsandtutorials, good question, hadn’t thought of that.
Do I have to buy that fancy black tool to do this?
What is this tool？
Hi Mark, do you think every tap has washer? I could not find the washer when I opened the tap in my bathroom, and when I installed it again, it no more work anymore. What's up this problem?
Thanks.
Yes they do. every Tap will either have a Cartridge or a washer. It maybe broken or missing, but it should be there. MRT
See this video to service a cartridge: th-cam.com/video/sEu2r-qWzRo/w-d-xo.html
Thnx
Yeah, you can really see it. Clear on white.
If, like me the cavities around your tap fittings are choc full of that silicon gum, then you'll find that a 20 minute job turns into a three hour job
Turns out the silicon is a vapor barrier. There to stop any water getting into the walls. Also there when you have a higher rating insulation to stop drafts or air leaking
@@Marksreviewsandtutorials Thanks Mark - I am also in Australia same as you, so I wasn't surprised to find it. Did you eventually bother replacing it behind your tap fittings after you replaced the washers?
i cant get the tap off, I removed the hot cold things.
❤️❤️
how come it still leaks after i changed it?
If you have changed the washer and it still leaks?.
Two thoughts if it is a mixer tap change the other tap as well.
If not then the tap may need to be reseated. You can get kits at the hardware store. Check where the washer seats inside the Tap. This needs to be smooth.
Also, check that your tap doesn't have other washers. Remember that red ring seal? Also, if you withdraw the stem from the assembly, you may find a little black O ring, that may need replacing.
@@Marksreviewsandtutorials mark, what if the seat is not smooth? I think it is my problems... Cheers
@@arthurbelotti8330 If you have changed the washer and it still leaks?.
Two thoughts if it is a mixer tap change the other tap as well.
If not then the tap may need to be reseated. You can get kits at the hardware store. Check where the washer seats inside the Tap. This needs to be smooth. If not smooth then re seat it.
Are you from Australia
He is (I am too)
Edhu ennna porulll solluinka
Hear I am 1 year later, struggling to remember what to do.
My taps don't have the removable nut in the middle, and I can't for the life of me find how to remove them 🤷♂️
Don't slip on the drip
Thank you 👍
Thank you
Thank you