Bill is building my animal right now so I'm really looking forward to me getting the speeds you are getting also. Thanks for making your vids and congrats on your speeds.
Nice work, and good transparency! Unfortunately, the internet requires lots of verification for a fun GPS run when you start going fast...is what it is. Enjoy the boat and keep running it!
Im looking at this boat and trying to decide between getting the carbon fiber one or the carbon fiber w/kevlar model. Any suggestions? I am mostly interested in a boat that can take a flip without cracking the hull (this was an issue I had with the zelos miss geico)
Todd, what Brand Motor is it (4082-2000 4 or 6 Pole ) ? ALSO An how can I get ahold of Paul Deity, that did the Props... website or email, phone etc., NICE RUN
Looks pretty good in a straight line on glass, I would like to see it on rough water with turns like when people race and trash at the local lake. Nice looking too! Its NOT stock if you have reinforced it! They are called MODIFIED after you beef them up!
So this boat is setup for saw or straight line passes for speed runs. The boat was used for some r&d and all the boats that are sold come reinforced so it’s no different then what you can buy so it is almost the same as a stock one. The stock one has carbon fiber reinforced seams and epoxy poured tips. Mine is a full inlay with poured tips. And when I’m saying stock I’m referring to the electronics I.e the motor and speed controller. And with boats a inlay provides no performance advantage other then being stronger in a crash. If I put the longer rudder it does fine in the turns and in choppy water. But once again that is not what I built it for. I have other boat that i use for bashing and heat racing.
Todd, you keep saying RTR, is that including the Props done by Paul Deity ? I want to call Bill and order one, but I want EXACTLY, what your showing!!!!
BWWGL9 no the props that I’m running are not included. But a similar cnc set are just call and order the boat and it will be like mine minus the inlay and props. You can get ahold of Paul and have him make you props
I always hated how aquacraft boats had a cover you had to tape on. Sucks when you have to take it off. I like using one strip of tape to keep water out and not to keep from losing the hatch. Quite a pet peeve of mine. I like my zelos 36 and never tape it. Tape is a pain when nothing holds the hatch on but tape. How hard is it to make a few tabs and a few thumb screws. Besides tape can peel a paint job eventually
@@toddsoltero5748 Right on Todd... I think I am going to go with the one of Bill's - Self Righting Carbon Fiber DOMINATOR Mono RC boats instead made with the Black Kevlar. Have you by chance tested out these boats yet - the DOMINATOR Monos ?
Why do boat manufacturers never include a rubberized foam inlay, with the edge of the lid folded down so that no tape is needed, and the edge cant flex when you latch it? My boat had never had a drop of water in it, even when I flipped it over from a nasty speed wobble. I hate taping a boat just because I opened the lid, that always seemed so annoying and never a selling point. If you want to sell a boat, show us a hull that we dont need to tape.
SgtPickledic lol bro no I don’t. At a 100 the single line won’t hold. I’ve tried. The impact blows the hatch off. So I over tape so I don’t loos my boat or my hatch 👍🏻
The straight line performance is awesome but I want to see it run like 10 passes in a row without a break , also why do you have to almost stop to turn around?If you are looking for a SAW boat it’s perfect! But it doesn’t seem to be a boat that can be raced on a oval course. The two quick passes are not a true test of what the boat will do on an extended run.
@@toddsoltero5748 how odd ,some jerk sitting behind a laptop calling someone out playing with an awesome boat a looser 😬 ... i dont understand people today ???... nice boat brother , I'll be doing some price checking on this one today , 👍😎
![[4K] BABYMONSTER(베이비몬스터) “FOREVER” Band LIVE Concert “영원히” 베몬만을 사랑하게 되…💗 [it’s KPOP LIVE 잇츠라이브]](http://i.ytimg.com/vi/TQfC0xdpiw4/mqdefault.jpg)
![USAB Showcase: CANADA vs USA [OFFICIAL STREAM]](http://i.ytimg.com/vi/m9Cz3xsdDgc/mqdefault.jpg)
Imagine doing all that taping and you forget to turn it on, LOOL
Lol 😂 it’s happened
Been there done DAT. Lol
Bill is building my animal right now so I'm really looking forward to me getting the speeds you are getting also. Thanks for making your vids and congrats on your speeds.
Dude that shit is fast as hell. I’m sure you had fun running it... hence the 2nd lap lol
Great. Very fast and very good Trim.
Awsome kevlar work.
YaUwAk247 the boat comes in Kevlar. I just did the carbon fiber inlay on it.
Boat runs badass, better than any I have seen but the hatch.
Thank you petey wheaty. I go crazy on hatch tap because it gives me a little pice of mind 🤷🏻♂️
Cool scheme!!
Wow that was fast! 😎😎😎😎😎
Awesome 👍👍👍
Holy impressive!
Nice work, and good transparency! Unfortunately, the internet requires lots of verification for a fun GPS run when you start going fast...is what it is. Enjoy the boat and keep running it!
INSANE!
very good
Nice run Todd! :)
Did you ever try 1917’s ?
Emil Wilkens yes. I ran 108 on them. Need more room to let them eat.
Todd soltero so you believe there is more in it if you can let it run out some more ? :)
Emil Wilkens yes. There is more. I’m going to go out in a few week and make passes again. I think 110 to 112. Will be the Max.
Todd soltero looking forward to see the video 😍
That thing is fukn crazy..
That’s cool
Yea rtr but is it really rtr? They are custom boats hand made in limited quantity. Also 2 grand. But you get what you pay for.
Moving 😳
Nice..
Niceeeee. Are You still running it?
may i know what remote did you used?
What were prop angles set at?
Did you attach the hatch screws? These are tape only hatches correct? How did you attach them? Pics or video up close?
I installed my own hatch screws but I still tap the hatch down.
What is that tape you are using Sir?
Well it is sealed!
Im looking at this boat and trying to decide between getting the carbon fiber one or the carbon fiber w/kevlar model. Any suggestions? I am mostly interested in a boat that can take a flip without cracking the hull (this was an issue I had with the zelos miss geico)
I prefer the carbon / Kevlar
Todd, what Brand Motor is it (4082-2000 4 or 6 Pole ) ? ALSO An how can I get ahold of Paul Deity, that did the Props... website or email, phone etc., NICE RUN
BWWGL9 thank you. the motors are oxidean marine 4082 2200kv. You can find him on face book
Can I have some boat with my tape
Amazing boat and such performance 👍👏; what would be the speed with the stock props from oxydean?
Anthony COUDERC with the stock props a guy in Texas did 102mph
Todd soltero really?! 👍 with the 3 blade 48 mm 1.4 pitch!! Wow
Anthony COUDERC yes he used the 1650kv motors, the stock props and I think 8s. You would have to ask the guy that did it.
Anthony COUDERC go to the dfw fast electric rc boat group on face book. His run is on there.
Todd soltero ok thanks for the info ; I will do that
Looks pretty good in a straight line on glass, I would like to see it on rough water with turns like when people race and trash at the local lake. Nice looking too! Its NOT stock if you have reinforced it! They are called MODIFIED after you beef them up!
So this boat is setup for saw or straight line passes for speed runs. The boat was used for some r&d and all the boats that are sold come reinforced so it’s no different then what you can buy so it is almost the same as a stock one. The stock one has carbon fiber reinforced seams and epoxy poured tips. Mine is a full inlay with poured tips. And when I’m saying stock I’m referring to the electronics I.e the motor and speed controller. And with boats a inlay provides no performance advantage other then being stronger in a crash. If I put the longer rudder it does fine in the turns and in choppy water. But once again that is not what I built it for. I have other boat that i use for bashing and heat racing.
do you have to tape the oxidean boats, i have the traxxas spartan and its never taped and runs fine?
Kwame G I tape it so if it flips at over 100 the Hatch stays on.
Todd, you keep saying RTR, is that including the Props done by Paul Deity ? I want to call Bill and order one, but I want EXACTLY, what your showing!!!!
BWWGL9 no the props that I’m running are not included. But a similar cnc set are just call and order the boat and it will be like mine minus the inlay and props. You can get ahold of Paul and have him make you props
Bro I want to build 40inch boat with fibreglass can u say that which motor and esc I have to use I need minimum speed of 70kmh
Akshay kharvi Get a TP 4070 with 200amp esc and dasbuta props and 6-10s lipo atleast 80 plus mph
Did you add the hatch screws or did it come that way ?
Colin Jackson I added the hatch screws.
Maybe if I win the lottery ill buy one even know there only $2000.
Hi Tod . Great boat. Does it have counter rotating props ?
yes
In or out rotation?
Generally in rotation
Is this self righting?
TOY!
How does the boat keep from blowing over at these speeds?
I have a lot of time in the boat setup to help prevent it from blowing over.
Nice 👍👍
How long is that boat?
secret squirrel 39 1/2 long
Thank you very nice boat.
Damm, cant waut to get my 6' catamaran!
That was raw
What’s the link to buy those props todd
There is no link.
I always hated how aquacraft boats had a cover you had to tape on. Sucks when you have to take it off. I like using one strip of tape to keep water out and not to keep from losing the hatch. Quite a pet peeve of mine. I like my zelos 36 and never tape it. Tape is a pain when nothing holds the hatch on but tape. How hard is it to make a few tabs and a few thumb screws. Besides tape can peel a paint job eventually
petey wheaty it has screws in the hatch. I am just going over board to help prevent any water penetration I can. It’s a pain but my pice of mind.
Holly...
What kind of radio are you using?
Paul Edinger graupner x8e
@@toddsoltero5748 thanks. It seems like it has a good range.
Wow, that boat is off the charts! Do you know roughly the price tag?
UpliFT-RC you can order one from oxidean marine for $1500
@@toddsoltero5748 Right on Todd... I think I am going to go with the one of Bill's - Self Righting Carbon Fiber DOMINATOR Mono RC boats instead made with the Black Kevlar. Have you by chance tested out these boats yet - the DOMINATOR Monos ?
They are 2000 now that is just ridiculous
Holy fuck did you use enough tape?
Lucas Fournier 😂😂😂 nope. Could have used a little more. I was I. A hurry.
Someone selling one my way for 1400 is that a good price for this rig
Why do boat manufacturers never include a rubberized foam inlay, with the edge of the lid folded down so that no tape is needed, and the edge cant flex when you latch it? My boat had never had a drop of water in it, even when I flipped it over from a nasty speed wobble. I hate taping a boat just because I opened the lid, that always seemed so annoying and never a selling point. If you want to sell a boat, show us a hull that we dont need to tape.
Well Ed I’m not selling boats and I’ll
Continue to tape my hatch!!
Bro you only need a single line of tape on each side.. LOL
SgtPickledic lol bro no I don’t. At a 100 the single line won’t hold. I’ve tried. The impact blows the hatch off. So I over tape so I don’t loos my boat or my hatch 👍🏻
Put enough layers of tape on there my guy?
Is that 3s a side or 6s a side?
swaldoski 6s a side.
@@toddsoltero5748 I'm currently working on a 45in wooden mystic gonna run it on 6s a side 1900kv 4082 motors I will see if it sinks or flys...
What are temps in C or F ?
John Damage F
Thanks to that 5 year old at the end of the video couldnt wait 45 more sec to start.
What you set the degree of your esc?
@@jacobdukes4741 sorry meant the timing on the esc
There d wind motors so the timing is set to 0 degrees
Is that home made
Jennifer Ortiz no it’s not home made 😂😂
Moines jet boat
Why doesn't anyone attach a gopro?
People do all the time.
So you mean to tell me that rc boats aren’t waterproof??
imserious2187 lol yes to a point. I do my best to prevent water infiltration but it happens.
Todd can you send me a link where I can buy one
Angelo Nelia oxideanmarine.com/
@@toddsoltero5748 thank you
I thought my traxxas m41 was fast on 6s
Yea me too. M41 was my first boat.
Should have went twin gassers way better
Verified - ARTR & Catamaran Class
//Team GPSSpeedRun
The straight line performance is awesome but I want to see it run like 10 passes in a row without a break , also why do you have to almost stop to turn around?If you are looking for a SAW boat it’s perfect! But it doesn’t seem to be a boat that can be raced on a oval course. The two quick passes are not a true test of what the boat will do on an extended run.
I have won of those boats mine goes 34 miles
Never understood why losers tape WATERPROOF BOATS!?
Marquis Toliver us losers tape water proof boats so lonely trolls like you have something to comment about !! So your welcome buddy !!
@@toddsoltero5748 how odd ,some jerk sitting behind a laptop calling someone out playing with an awesome boat a looser 😬 ... i dont understand people today ???... nice boat brother , I'll be doing some price checking on this one today , 👍😎
because they're full of shit and lie to sell they're junk