Just bought myself a keeway 125 never had one before never had a motorcycle before, but now I've passed the CBT and I need to learn how to maintain the bike.
Do you know what the small clear cup with the black cap on the top is called? It is on the side of the bike and has a black pipe coming out of the bottom.
@@motorcyclefixerthanks mate. And sorry to be a pain but for the love of God I can't find the size of the washer for the sump plug anywhere. Do you know the size?? I have new oil and an oil filter here waiting for the washer lol
Sorry i don't know off the top of my head I would drop the oil and then see what size they are Halfords or someone similar should have them on the shelf
they are tight. They should come out with a impact driver but if they are still tight try using some heat to warm them up as they may have loctite on them. As a last resort you'll have to drill them out and replace them
Just bought myself a keeway 125 never had one before never had a motorcycle before, but now I've passed the CBT and I need to learn how to maintain the bike.
Good luck!
Cheers for that. It's the same engine as the benelli Leoncino 125cc and didn't know where the oil drain plug was. Thanks
Hi
I'm glad it helped
ATB
my daughters bike rks 125 is overheating i would like to check the oil pump but i dont know how to get to it do you have any videos on that at all
Sorry I'm not sure on this engine how it works and i can't get an engine diagram from anywhere
Great help mate
No problem 👍
thank you, my friend!
Welcome!
I have sr 125 but bike give pickup then back to back shetdwon what's didn't understand please give suggestions
Do you know what the small clear cup with the black cap on the top is called? It is on the side of the bike and has a black pipe coming out of the bottom.
Sorry i don't know what you mean.
What is the end connected to on the engine.?
Is a a crank case breather? Carb overflow ?
That's likely to be the brake fluid reservoir.
What filter did you use? HF 131?
Hi
Yes it was HF131
😍😍 thanks
I'm glad it helped 👍
torque settings for filter housing?
I don't have the manual but m6 bolts into aluminium is normally 6-8Nm
@@motorcyclefixerthanks mate. And sorry to be a pain but for the love of God I can't find the size of the washer for the sump plug anywhere. Do you know the size?? I have new oil and an oil filter here waiting for the washer lol
Sorry i don't know off the top of my head
I would drop the oil and then see what size they are
Halfords or someone similar should have them on the shelf
@@motorcyclefixer thanks for replying mate
@@HellRyder18 no problem
change clutch keeway superlight 125
Tried doing mine couldn’t get the bolts off at all. Almost welded shut
they are tight. They should come out with a impact driver but if they are still tight try using some heat to warm them up as they may have loctite on them. As a last resort you'll have to drill them out and replace them
@@motorcyclefixer thank you mate will try
@@motorcyclefixer managed to get it off and change the oil in the end
@@ryanbatten9564 well done
Good job 😎
@@motorcyclefixer any tips on replacing the air filter?😂