A VIEWER sent me this Jurassic Park TINY TV | Can I FIX It?
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- This was sent in by Stuart to my PO Box. Thanks Stuart!
It's a Tiny TV Jurassic Park, erm thing.
It appears to have no power and won't turn on. Although pressing reset gives us a white screen...
Let's see if we can work out what's wrong with it!
Hope you enjoy!
Steve
PS. I'm not an expert in repairs at all. I do this for fun, and it may not be the best or safest way to go about repairing broken stuff. I'm pretty good at melting plastic though. Please don't copy me - I'm an idiot.
SUPPORT ME on PATREON: bit.ly/ssf-patreon
ONE-OFF DONATIONS: www.paypal.me/...
MERCH: stezstixfix.com
AMAZON WISH LIST: bit.ly/ssf-wish
SUBSCRIBE HERE: bit.ly/ssf-sub
FOLLOW ME on Facebook: bit.ly/ssf-fbook
If you want to make a device donation to the channel, please use the following PO Box. PLEASE NOTE that this is not a repair service, and all items are non-returnable.
PO BOX ADDRESS: StezStix Fix?, PO Box 415, BOLTON, BL4 4AZ
Please only use this service if you are a UK resident and using Royal Mail, otherwise they'll probably lose it.
Some of the magic things I use to break stuff;
My soldering iron: UK amzn.to/2Isf360 US amzn.to/3dfq8Xe
My hot air station: UK amzn.to/3kPxaBQ US amzn.to/3xo0SoM
My microscope: UK amzn.to/2VP3msU US amzn.to/3DmDgED
My desoldering gun that goes "moo": UK amzn.to/3HHt73P US amzn.to/3QHJOkb
My multimeter: UK amzn.to/2LjBgnN US amzn.to/3qEiSHy
My blue mat: UK amzn.to/48ZgkI8 US amzn.to/3LcZUkI
Filming equipment;
My camera: UK amzn.to/38IdR7s US amzn.to/3BiwyNg
My 2nd camera: UK amzn.to/3Rfjn6U US amzn.to/3BGOB1i
My microphone: UK amzn.to/3rCriPc US amzn.to/3QJwWtS
VOS's mic: UK amzn.to/3pz2c1L US amzn.to/3Lc7aO1
Links are affiliated where possible to help support the channel. Nice.
Could try heating the blob chip from the back to re-flow the solder connections, worth a try.
good idea, does it ever work?
was about to comment that
@@murraymadness4674 Only one way to find out.
Won't work, they're wire bonded (like normal ICs), not soldered like BGAs.
@@j.f.christ8421 still worth a shot though
I'm FINALLY famous! In the same video as Dave! Haha
Thanks for trying Steve. I'd have loved to have seen it working as it seems a usa exclusive one. Knew I should have got 2 of them instead of an among us figure for my nephew!
Cheers again, Stuart.
You are not famous
Nice to see you! Get a picture with Dave and you will level up :)
@@Anderyo I know him now. Are you jealous of his fame?
@@Anderyo aren't you a treat?
NOOOOOO, the spoiler !
Really appreciate you sharing the successes as well as the failures, Steve! Too many TH-camrs only show their successes & conceal the real challenge of DIY repair. It's especially important in these days of anti-right-to-repair efforts on the part of the corps.
Congratulations on rolling over the counter Steve. I like your solution to the 100's. 😅👍
😂 thanks Chris!
While pressing the 'blob chip' you were also flexing the board. May be broken traces.
I was thinking the same. There was a particular joint above the chip that was moving a LOT. Might be worth investigation
Well done darling. You publish all your stuff, even if it doesn’t work and also, you turn up in your work like an artist. You are a lovely man. Blessed be 💕
Blessed be?? The Hooded Man shall come to the forest....To be Herne's son and do his bidding.....
@@Simon-xc5oy Prophecies of Gildas
@@janskeet1382 Ahhh.....its an old English Pagan greeting so being a child / teen of the 80s I was taken back to Richard Carpenters Robin of Sherwood....a true classic. No clue about Prophesies of Gildas....sorry....
@@Simon-xc5oy Yes, I’m an old English Pagen. The Prophesies of Gildas are quoted in Carpenter’s Robin of Sherwood.
@@janskeet1382 Ahh I see. Just know it as Pagan etc and through Robin of Sherwood. It all seems a long time ago now..since the 80s and such great television....Most of the cast are in their 60s and 70s now...how time flies.
Hi from Australia.. i really like watching u have a go at fixing stuff.. i stumbled across your channel by accident and love it!! Im a 50 yr old female who isnt into this stuff but for some reason find this realy interesting and have a chuckle at the little jokes u make.. keep up the great work!
While I honestly don’t like to see you fail it’s comforting to know you do ! Love the videos .
come on Steve do it! for the content baby!!
I’m over the moon with your 107 days since melting plastic, don’t be so quick to blame it after this video, your doing a swell job steve, just remember Dave is you helper, not vice versa. Lol keep up the great videos mate. 🤙🏼🇦🇺
Joe from Australia 🤙🏼🇦🇺
something stupid that i found interesting regarding the blue mat, the circular indentation to the right of Dave is to hold a loupe! I saw this on one of My Mate Vince's videos.
Hey, Steve, I think the LCD connector was on the board opposite the blob, could there be a bad connection on the connector, and pressing the blob manipulates it?
I really hoped this was going to be a fix! I know you can find the videos of the Jurassic Park tv' on YT but, it would have been interesting to see you pull them off the flash chip. (I've done it from a couple of old toys with screens) It's definitely worth learning how to do!
Yay, I'm so proud of the counter! It always the first place I look when your videos load up haha. Also, looks like you need to update the other counter and add another 1k!
[Hidden down here so not to reveal video spoiler]
Stupid blobs. I wonder if maybe a leg of the IC under the blob wasn't soldered well and then the blob stuff got in under a leg or two, preventing contact. Then when you're applying pressure, you're connecting one of the legs but maybe another leg has too much blob under it for pressure to resolve? Shame its so hard to remove blob.
BTW, speaking of Dave, you wouldn't believe it but I was repairing a TOMY Super Cup football game (video 'soon') and guess what fell out of the box? A DAVE. I was going to call him Steve and put him in resin, but there's a fine line between imitation and tribute so I gave him a proper burial.
😂 Dave 2! Love it.
Yeah, I might still try and remove that blob. I've been told you can melt it off with some chemically stuff or something. Sounds like hard work though! 😅
@@StezStixFixI'd be well up for watching a video of you melting a blob off!!
Thank you for hiding spoiler information, wish everyone would do that!
@@StezStixFix Try a heat gun to soften it first. From what i've heard about the chemical way, it takes harsh and nasty chemicals that you definitely don't want to be breathing in (some can also damage the board)
@@iaincowell9747 You can't get the epoxy off without causing damage.
I really love what you've done with the channel! So much character!
I always wonder, do people get there items back when they send them in? Or are they alway making a one way trip?
I agree you should’ve heated the blob ship up. I see if you can reconnect the saddle joints.
can't fix em all, oh well. still cool to see inside it, great video!
I swear dude be dropping some dope ass sound you need to make a album
Silly idea but something worth trying? Maybe the screen is coming on but may not do anything unless you press a button on the remote? Will it get anything (a signal?) from the remote? I'd assume the 'white' object is a receiver for this. If that isn't working maybe it's causing the rest of the board to fail? I'm sure it isn't but something is awry somewhere there, so what else could it be? (Sillier idea, try different batteries, alkaline instead of whatever else?). Further idea - also, perhaps silly, try to see if the screen is properly connected, it could have a loose part on the ribbon cable?
It doesn't matter at this point but when you have buttons, you can test the voltage drop across a button, so you can analyze if when you press it the voltage goes out. Usually the buttons are pulled up by a resistor or internally of a MCU.
4:55 That is the contact switch for the "demo mode".
When you remove the plastic tab and the contact closes the device operates normally.
That was a killer cover of Duran Duran!
They made a South Park version of this. I saw it in the toy department at Walmart next to the Legos one day. Let that sink in.
That's a great looking counter!
Chinese blobby seems to be the problem. 👌👍
Alternative Comment: Bob, The Builder: 'Can we fix it?'. Steve: 'Well, we can try!'.
This might just be me but I think when pressed the board seemed to bend along a distinct line under the blob chip, is it the board itself?
Thought the same. Maybe broken lines?
I wonder if it's StezStix Rapping. Cause that would be cool.😎👍💯
Too bad it's Extinct. Life couldn't find a way with this one. I wanted to see it work as well. 😩
I subscribed because you showed your fail. Great job being real.
Good E for Effort
1st time watching your videos, was caught off guard with the bars, good stuff 💯
🤩❤️ Great vidéo ! Can try re heat the blob or swap the memory chip on another miniature tv
Bloody hell Steve, all this time I’ve been watching and I didn’t realise you were just up the road in Bolton! 😂
I loved the PM Dawn jam. nice one!
The board did flex a lot and the blob is quite firm so I don't know you'd actually move anything under the blob but certainly the board flex could be affecting any poor solder joints on other components. Check none of the buttons are stuck on in case that is and stops it booting?
Just wanted to say thank after watching a lot of your videos I had ago at fixing a broken security camera I had and was able to get it working so again thanks.😊
Cotton bud with some acetone to see if the blob is soluble in acetone. If so, you might be able to get past the potting material.
It's resin. Your main choices are brute force or nitric acid.
I have one of these for back to the future.
As someone that repairs electronics for a living it is "nice" that you show your "fails". If I had to use TH-cam as a litmus test I would feel like a complete and utter failure. I have a repair rate of over 90% but those that can't be fixed are a kick in the nuts every time. Thanks for the video! have a wonderful week!
Thats a delightful item!
Another sweet jam
Blobby Blobby Blobby!!!
(Only those in the UK of a ... certain age will have any idea what that was...!)
😂 bring back mr blobby!
Please don't 😂
No for the love of God don't use too give me nightmares 😂
Oh yeah we all know.
I'm from the U.S but i learned about Mr. Blobby from an episode of Expedition Theme Park on TH-cam.
Love the tune take on pm dawn
Although the screen connections looked ok putting the pressure on the blob chip could be affecting the screens connection as they are underneath on other side of the pcb.
Worth a try?
I watch your videos on my walk in the morning here in California. Fun stuff man love the videos.
Thats the tv thing from willow the wisp
Evil Edna! 📺😅
View to a Kill got me I'm a fan now 😂
Bond. Wires Bond. Nice Duran Duran-like outro. :)
Have you tried using the remote control? As with some 'real' TVs 'on' means standby. You need to use the remote to turn it on...
When he said Dave, he meant me
As well as heating the chip, you could try some freezer spray on the blob chip. It won't fix it but proves the point that the fault is in the chip. Freezer spray is great for fiinding dodgy components. Use a little at a time otherwise you won't isolate the fault.
It's almost never the blob chip that fails. The most likely culprit is the screen.
Guess in this Jurassic Park it wasn’t Meteors that wiped out the dinosaurs it was instead the deadly Black Blop.
You know Dr. Meddows suggested the same thing in the 1988 version of the BLOB. Small world isn't it?
Send it to Vince,he loves a challenge.
He repaired tiny bond wires inside a watch!
That's child's play compared to the wires under that epoxy. And solder doesn't work, you need a micro-welder.
Lol The sender obviously has a favorite co-host 😂😂😂😂
Didn’t know you lived in bolton my home town to. Have you ever tried to fix a car key. Would pay for your time.
Hi dave and steve
Still just here for the raps and the songs! Awesome content :D
I wonder if you're also pushing down on the screen's ribbon cable and fixing an intermittant connection there.
I have four of these tiny TVs mine are Original batman, back to the future, south park and friends. The remote died on the south park one but the TV still works. I'm curious if you take out that 8 pin rectangular chip which holds the videos that are shown and put it into another one of these TVs. I'm also curious if it's possible to extract the video files and play them back in VLC on a PC
Could you heat up the blob chip and hold it down with your plastic tool as you were doing when the screen came on? Hold it till it cools so it will stay in place. Just a wild thought. Sort of melt it in place but not too much to damage it
Likely wont do anything. A COB (chip on board) aka blob is a raw semiconductor dice (no package) glued to the board and has gold wires welded from it to the board and it does not use any solder. Then its covered by epoxy to protect it against light and reverse engineering
Someone at the company told me that these were s special deal with WalMart that didn't sell well, so they started liquidating them on the cheap.
I would absolutely remove the blob and see what else is under it. Could be a standard processor that has a few unsoldered leads. I mean it is broken presently. What else could you possibly do to it...
The blob is the cheapest way of producing a chip. A raw semiconductor dice which has no package (and is likely a APPLICATION SPECIFIC IC OR ASIC) and its glued to the board and has gold wires welded from the tiny mm size pads on the dice to the board. Covered by epoxy to protect it from light and rev engineering. Because you dont need metal pins and a package it saves a few cents
Use the screen and case for a RP Pico and make your own tiny TV.
Ey yup! Didnt know you were a fellow boltonian!
Oh man, only now realised you’re so near by! Fancy fixing a commodore PET? :)
9:22 SCARED THE HELL OUT OF ME
That MK-something chip might be a Flash Memory, so it's very possible that chip might be corrupt, thus failing to boot.
It may need a complete reflash either for Firmware or BIOS (if applicable) so try to get another one and change that integrated.
I don't think the blob-chip might be faulty, because, it's getting energy throughout the entire board, and most importantly, the screen boots but can't. Either way, blob-chips are very difficult to replace as most are microchips and not the usual integrated size you'd find regularly.
I think it's a faulty screen or screen connection and when you push down on the blob chip, you're jostling the screen pieces into place.
Nice.
Great content as always, I have a SNES that I’ve just brought with a few games, I don’t think it’s working 100% the games don’t look very sharp and some of the colours look a bit dull, so you take things in to repair and return?
How did you know what capacitor value to use when the original had no markings?
reflowing the flash chip may have done the trick . it may not do anything if it cannot read that chip for some reason
Could you be shirt-circuiting the reset button when pressing the blob chip? It looks like the board is bending quite a bit?
S1 is a Switch the S stands for "S"witch. Forrest Mims' books has all that elementary info....
the power for the backlight is aparently getting to the screen but the video signal isnt. Could it be the connection between the screen and the board that is faulty/ intemittent. You really need an oscilloscope fpr jobs like these. Then you could have seen if there was activity on the significant pins of the memory chip for example.
you could try heating the blob?
Go for it Steve, it would be interesting to see what happens …. and you are not going to make it worse. Presumably the blob potting compound is immune to IPA and acetone?
Its epoxy or hard plastic. Although it has fragile gold bond wires which might easily break
The wires are so thin on those chips under those blobs
Nice
Unlucky Steve can’t win them all mate 😊
Can you reflow through blob chip?
Great video as always. Incidentally I read recently that paleontologists have discovered a dinosaur that appears to have eaten nothing but curry during its life… they are going to name it Mega Sore Arse. 😂 regards
😅
OH MY GOD
Ok isn’t it a safety switch in the back so when the batteries are being replaced the TV won’t come on from the back in the right hand corner?
What have you got to lose ? Not working anyway what’s the worse it still doesn’t work?
how about adding a ton of flux then reflowing said blob chip? you cand exactly make it any worse right?
Love your videos made me start my Channel ! 😊
I think you mean *high* ESR!
Are the switches working ?
Did they forget to solder in an eprom or something? There's a vacant spot for a chip
What donyou charge steave ??. Got some small bits if your interested, 1 is unusual 😮!!??
could it also be a bad ribbon and you are pressing through from the blob chip
at least he tried
In another video that presents this, he powers up the tv thought the remote control. Not from buttons.
In the words of the legendary Chip on his Challenge - Bummer.
S1 means switch 1
What you could do is chuck it in a toaster oven at 185C and see if the glob top underneath will reflow.
cant fix 'em all ! even with dave helping lol
I tried taking mine apart it was the friends variant and I was bummed that I couldn't add my own movies.
Did pressing the reset button also wipe the memory, so there are no files for the screen to display?