Not a fair test, you should have rinsed using hose and not using pressure washer, this would have shown the actual cleaning ability of the shampoo. With pressure washer, half of the job is done by the washer itself.
Foam doesn’t increase the dirt attacking and encapsulating properties of your cleaner. Test with and without. It’s the same. I hate to know this cos I’ve invested in foaming capability quite heavily.
I tried this on a white car and still get a thin film of dirt that I could write on after leaving the foam to dwell for 5 mins then rinsing, is that normal or should it be pretty much clean? I am using a Marolex pump sprayer plus a garden hose so not sure if that makes a difference. I used about 2oz with about 40oz water. The foam seemed pretty decent to me and lasted for a good few minutes on the car but still the layer of dirt. Is it safe to still use a mitt on the second foaming despite the layer of dirt? Any tips/info would be great!
Use rinse less wash like DIY videos show for the contact wash I’ve heard others call this a hybrid wash saves time water and produces great results especially adding some other DIY products like water spot remover quick beads ect
@@diydetailofficial Yes, I know. For some reason, there are those people who have this idea that snow foam magicly cleans your car. That is just not so. So, thank you for the fast reply.
I’m sorry if this is a stupid question. Are you supposed to foam the vehicle and then take a microfiber towel/microfiber mitt and scrub the vehicle? Or do you foam the vehicle and then just rinse it off?
@@ohboy2592 you need to rinse all the dirt off the car first. I had a dark color Tahoe never foamed I used 2 buckets and had no scratches after 4 years of washing never even polished it. I also used Meguiar’s products from Walmart
DIY Detail Incredible Suds: bit.ly/IncredibleSuds
Looks like the water does the job
Stay tuned
Extremely thicc foam.
Thick and powerful
Not a fair test, you should have rinsed using hose and not using pressure washer, this would have shown the actual cleaning ability of the shampoo. With pressure washer, half of the job is done by the washer itself.
Stay tuned
My car has a good wax coat. So when I foam my car, it does work. Maybe if it did not have a coating it would not work as well.
Protection definitely helps.
Foam doesn’t increase the dirt attacking and encapsulating properties of your cleaner. Test with and without. It’s the same. I hate to know this cos I’ve invested in foaming capability quite heavily.
It increases dwell time principally
Do all cleaners need to sit for about 5 minutes? I tend to just spray and wipe
Dwell time will reduce the effort required. You need to give chemicals time to do their job.
I tried this on a white car and still get a thin film of dirt that I could write on after leaving the foam to dwell for 5 mins then rinsing, is that normal or should it be pretty much clean? I am using a Marolex pump sprayer plus a garden hose so not sure if that makes a difference. I used about 2oz with about 40oz water. The foam seemed pretty decent to me and lasted for a good few minutes on the car but still the layer of dirt. Is it safe to still use a mitt on the second foaming despite the layer of dirt? Any tips/info would be great!
That’s normal, the pre-foam takes care of grit, but leaves traffic film which you then remove with the contact wash.
@@diydetailofficial great thanks! 👍
Use rinse less wash like DIY videos show for the contact wash I’ve heard others call this a hybrid wash saves time water and produces great results especially adding some other DIY products like water spot remover quick beads ect
I don't recall DIY making any claim(s) that IS was a touchless car soap. If I missed that claim, please let me know.
Never have made that claim.
@@diydetailofficial Yes, I know. For some reason, there are those people who have this idea that snow foam magicly cleans your car. That is just not so. So, thank you for the fast reply.
Thanks for the question.
It does the job right. 👍👍👍👍
Yes
Next time use just a regular hose. Coulda did that without foam with pressure washer. The most horrible foam coulda did the same thing
Thanks for boosting the algorithm.
Excellent demo!!👌2 questions!! How many PSI do I require and type of water do you recommend to achieve that foam quality 🤔
We use our Kranzle at around 1000 psi, just regular tap water.
@@diydetailofficial Thanks!!
Foaming does one thing, It gets you to buy more product, faster.
Incredible Suds is an awesome soap, my friend. Try it before you write it off as a gimmick :)
I’m sorry if this is a stupid question. Are you supposed to foam the vehicle and then take a microfiber towel/microfiber mitt and scrub the vehicle? Or do you foam the vehicle and then just rinse it off?
We prefer to foam, rinse, foam again ( lightly) then contact wash.
@@diydetailofficial thank you very much! Great videos
Just rinse contact wash using 2 buckets. Foaming is a gimmick it does nothing especially when you still have to contact wash.
@@user-zt6bt8dp2cand that’s how you introduce scratches to your paint. Plain water and dirt scratches your cars paint
@@ohboy2592 you need to rinse all the dirt off the car first. I had a dark color Tahoe never foamed I used 2 buckets and had no scratches after 4 years of washing never even polished it. I also used Meguiar’s products from Walmart
Both! Lol
Yes !
Sceptical
Try it.
I suggest demo'ing cleaning products with a garden hose that will win more hearts of people who are complaining in the comments section
Good idea 👍
cool little short thingy that proves NOTHING FFS
Try it and you will understand 👍