Great video. I’m using this exact model today on a composite deck. I’ll use closer to 50% power I think after I hand pump some SH on it first. Very user friendly video, please do more of these for power washing different surfaces!
Great video. I just bought this machine from Lowe’s about four days ago and I was having hard time how to operate it! The manual is not effective as watching the video! Thanks 🙏
Nice video, but if i may point out a few things : 1 you have to be sure to feed 4.2 GPM to the pump or at least 80 to 90 % or else this will ware it down faster 2 You didn't mention if the ( NON Detergent oil) was already in the pump ? usually all oils are not included.. Especially pumps like this one that has a oil cap like yours (yellow or orange) on the top 3 Even if they say that 87 octane gas is okay, it is always better to put higher octane gas (94) 4 And the Unloader is pre-set at the right pressure if needed to change pressure, it is best to change the nozzle or buy a ajustable one 5 water leaks from tap should be checked cause a pressure washer needs all the GPM possible
@@bonecc4061 Because the higher the octane the less (dirt) 'sort of speak' goes into your carburetor, so the less ware on your gas filter, the more performance from the motor, and all around better efficiency...(and probably longer run time ) All small 4 stroke gas engine should be treated with (love and care) and this includes the 'food' / (gas) that you feed it
This unit comes with a red cap on the pump oil fill. The yellow one you see needs to be placed in there after you unpack it. It's the dip stick. The unit also has oil already in the pump. Just not the engine. And as far as adjusting the unloader to the lowest pressure, it states to do this in the owners manual and also on the startup procedure that's on the placard on top of the handle where the tips are stored.
I own the exact one.. powerful . you have to add a ball joint level on / off to the system as every time u change from handle spray to surface cleaner you have to release and turn pressure down .. pain.. you need to turn pressure all the way up in video as you have not even got the full effect of the system. Also with a power turbo nozzle the machine will take that rust off in 2 secs. . Good machine and make sure when you turn off to release the water on the handle at the same time to take pressure off the pump to save life..
@@rikkytikkytavvy2110hey! Could you answer a question for me? Is there a way to inject SH or detergent into the line or is that something I need to do with a separate machine?
Quick tip, mine had the same issue. Just put a rag over the knob and use a pair of channel lock pliers to turn it. Be gentle with it though, it's only plastic.
@@holddisforme Mine requires you to "pull up, turn to desired setting and push back down to lock in position." wouldn't that be funny if its locked because its designed to be that way while in the down position.
@@user-dd2jg6kv8y :D I know that's how it's supposed to work. I should have been more clear, once I managed to get it loose it now functions like it should, freely, by hand. Whoever installed mine, either cranked it down like their life depended on it or bolted it on without backing the regulator off a little first. You are correct though, definitely make sure to pull up on it first.
Absolutely hate the pressure hose it comes with but to be fair most pressure washers come with cheap pressure hoses. One of the first things anyone should do is to buy a higher quality flexible pressure hose.
Great video. I’m using this exact model today on a composite deck. I’ll use closer to 50% power I think after I hand pump some SH on it first. Very user friendly video, please do more of these for power washing different surfaces!
Great video. I just bought this machine from Lowe’s about four days ago and I was having hard time how to operate it! The manual is not effective as watching the video! Thanks 🙏
I thought this particular model was sold at Harbor Freight?
@@jason91279 Westinghouse
WPX4400
4400 PSI 4.2 BPM
That’s what I got from Lowe’s
Nice video, but if i may point out a few things :
1 you have to be sure to feed 4.2 GPM to the pump or at least 80 to 90 % or else this will ware it down faster
2 You didn't mention if the ( NON Detergent oil) was already in the pump ? usually all oils are not included.. Especially pumps like this one that has a oil cap like yours (yellow or orange) on the top
3 Even if they say that 87 octane gas is okay, it is always better to put higher octane gas (94)
4 And the Unloader is pre-set at the right pressure if needed to change pressure, it is best to change the nozzle or buy a ajustable one
5 water leaks from tap should be checked cause a pressure washer needs all the GPM possible
Why is 94 octane better? When the manufacturer says 87?
@@bonecc4061 Because the higher the octane the less (dirt) 'sort of speak' goes into your carburetor, so the less ware on your gas filter, the more performance from the motor, and all around better efficiency...(and probably longer run time )
All small 4 stroke gas engine should be treated with (love and care) and this includes the 'food' / (gas) that you feed it
This unit comes with a red cap on the pump oil fill. The yellow one you see needs to be placed in there after you unpack it. It's the dip stick. The unit also has oil already in the pump. Just not the engine. And as far as adjusting the unloader to the lowest pressure, it states to do this in the owners manual and also on the startup procedure that's on the placard on top of the handle where the tips are stored.
By the way love your videos your videos are the only thing that made me wanna buy dirt Mike so please you know I'm waiting for you
i was watching a older video you have on your 2016 kx250f i just got one and i was wondering how to adjust the idle on it
I own the exact one.. powerful . you have to add a ball joint level on / off to the system as every time u change from handle spray to surface cleaner you have to release and turn pressure down .. pain.. you need to turn pressure all the way up in video as you have not even got the full effect of the system. Also with a power turbo nozzle the machine will take that rust off in 2 secs. . Good machine and make sure when you turn off to release the water on the handle at the same time to take pressure off the pump to save life..
I'm 5'5 do you think the CRF250F is good for me because I am a starter but I want a fast bike
Do you need a water tank to go along with this pressure washing machine ? Or do you just use the house’s spigot?
Got this setup about 3 weeks ago and you can just use the houses spigot or water tank if preferred, this pressure washer uses a standard 5/8 connector
@@rikkytikkytavvy2110hey! Could you answer a question for me? Is there a way to inject SH or detergent into the line or is that something I need to do with a separate machine?
Thank You For Your Divine Service 🙏🏾🫡👍🏾💯⚖️
I’ve had two of these and both regulators won’t move
Regulator?
Quick tip, mine had the same issue. Just put a rag over the knob and use a pair of channel lock pliers to turn it. Be gentle with it though, it's only plastic.
@@holddisforme Mine requires you to "pull up, turn to desired setting and push back down to lock in position."
wouldn't that be funny if its locked because its designed to be that way while in the down position.
@@user-dd2jg6kv8y :D I know that's how it's supposed to work. I should have been more clear, once I managed to get it loose it now functions like it should, freely, by hand. Whoever installed mine, either cranked it down like their life depended on it or bolted it on without backing the regulator off a little first. You are correct though, definitely make sure to pull up on it first.
I had to use pliers gently the first time to move the regulator and then it was easy to turn by hand henceforth.
Absolutely hate the pressure hose it comes with but to be fair most pressure washers come with cheap pressure hoses. One of the first things anyone should do is to buy a higher quality flexible pressure hose.
What have you found for better quality pressure hoses?
i replaced with 20 mtr straight away as use commercial jobs.
Hi everyone
My regulator is so stiff but yours looked very easy to turn?