I have a early seventies 2020 that has only manual steering. Could this be my problem or did these tractors come with manual steering? Please respond if you read this as I really need to know. Thank you.
Hey love my 2130. Just finished plowing a field today on it. Thanks for the video very informative. A question about hydraulics, I was trying to run a three point hitch wood splitter. I had the remote lever pulled and worked the splitter back and forth which was fine. After a little use it starts to chatter on me. Still seems to work but chatters and shakes the hydraulic lines. Is that just cause the pump isn't keeping up with the flow demand or something else? Is it ok to run it like that for long periods or would it cause damage? thanks!!!!
Hi! Sorry for the late reply. Do you happen to know where your return line runs to? It sounds like it runs to the transmission case. If so, you may be running the main pump out of fluid. In later models, they ran the return back to the filter cover (underneath) so that your accessory ports were not limited by the capacity of the return pump which is located in the transmission.
@@giledwards2519 hey, can't say I know for sure. Worth a look. Either way, is there a risk of damaging something by running it? Thanks a lot of getting back to me!!!
@@Ewaugh69 Shouldn't cause any damage. Just creates undesirable operation. Check those return lines and see if they just dump into the trans case, or if they go into the filter cover. I'll see if I can find a picture of the return line that goes to the filter cover so you can see what to look for!
@@giledwards2519 I have a 1020 John Deere tractor without power steering or hydraulics in the rear. It only has three point hitch. How can I add power steering and hydraulics to the back. How would I do this or where can I find a kit. With instructions. Model 4R10 Year is 1966 I think.
Any idea why an 1120 would chatter the loader & 3pt hitch? not the steering the pressure is 2000psi then drops when in demand. My tank return goes back to the pump...
I have a JD 2355 with hydrauiic problems. My internal transmission pump is not sending the 150 pounds oil pressure to the front high pressure pump. I need to gain access to the internal hydraulic pump, which means splitting my tractor in half. I asked a JD dealer, and they want $3600 to do that. I need to find how to do it for myself. Can you help?
@jbarr3551 I put a new hyd pump inside the transmission. Quieted it some but that is not the whole problem. Im stompped. Going to run it as is. Unless someone has a fix for it.
Very useful interaction thank you so much.
Glad you are passing your knowledge on. Thank you sir 🙏
Very well done, on my 301 the FEL front loader doesn’t work unless three point is up. Is that right??
Love your walk and taking jewels of wisdom
I have a early seventies 2020 that has only manual steering. Could this be my problem or did these tractors come with manual steering? Please respond if you read this as I really need to know. Thank you.
Hey love my 2130. Just finished plowing a field today on it. Thanks for the video very informative. A question about hydraulics, I was trying to run a three point hitch wood splitter. I had the remote lever pulled and worked the splitter back and forth which was fine. After a little use it starts to chatter on me. Still seems to work but chatters and shakes the hydraulic lines. Is that just cause the pump isn't keeping up with the flow demand or something else? Is it ok to run it like that for long periods or would it cause damage? thanks!!!!
Hi! Sorry for the late reply. Do you happen to know where your return line runs to? It sounds like it runs to the transmission case. If so, you may be running the main pump out of fluid. In later models, they ran the return back to the filter cover (underneath) so that your accessory ports were not limited by the capacity of the return pump which is located in the transmission.
@@giledwards2519 hey, can't say I know for sure. Worth a look. Either way, is there a risk of damaging something by running it? Thanks a lot of getting back to me!!!
@@Ewaugh69 Shouldn't cause any damage. Just creates undesirable operation. Check those return lines and see if they just dump into the trans case, or if they go into the filter cover. I'll see if I can find a picture of the return line that goes to the filter cover so you can see what to look for!
@@giledwards2519 I have a 1020 John Deere tractor without power steering or hydraulics in the rear. It only has three point hitch. How can I add power steering and hydraulics to the back. How would I do this or where can I find a kit. With instructions. Model 4R10 Year is 1966 I think.
Any idea why an 1120 would chatter the loader & 3pt hitch? not the steering the pressure is 2000psi then drops when in demand. My tank return goes back to the pump...
I have a JD 2355 with hydrauiic problems. My internal transmission pump is not sending the 150 pounds oil pressure to the front high pressure pump. I need to gain access to the internal hydraulic pump, which means splitting my tractor in half. I asked a JD dealer, and they want $3600 to do that. I need to find how to do it for myself. Can you help?
I’m no mechanic but it’s not super hard
You need stands if they told you that you have to split the tractor.
I have a vidio of the noise that it makes. I rebuilt the steering column and put a new hyd pump on the tractor. Did not change or fix it.
I have an 1120 that chatters the steering when turning it. Do you know what causes this.
i have a 1120 that chatters the loader& 3pt hitch, did you ever figure yours out?
@jbarr3551 I put a new hyd pump inside the transmission. Quieted it some but that is not the whole problem. Im stompped. Going to run it as is. Unless someone has a fix for it.
My hydraulic guit working no steering no 3 point ck screen bypass valve new filter no help how to I test the pump
Any luck I’m having same issue