Chevy Camaro 3.6L [#57-3078] Air Intake Installation

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ส.ค. 2016
  • See how easy it is to install a K&N air intake on your 2012 to 2014 Chevy Camaro 3.6L.
    K&N 57-3078 performance air intake system is easy to install and guaranteed to increase horsepower in 2012 to 2014 Chevy Camaro with a 3.6L engine. When dyno tested, this air intake created an estimated gain of 13.14 horsepower at 5100 RPM.
    This air intake includes an oversized washable & reusable air filter that can go up to 100,000 miles between servicing. K&N air intake 57-3078 also includes a rotomolded polyethylene intake tube with a custom heat shield designed to increase air flow and isolate intake air from engine heat.
    More information on this air intake system:
    www.knfilters.com/cold-air-in...
    Search for an air intake for a different vehicle:
    www.knfilters.com/search/appse...
    K&N® is the world's leading manufacturer of washable performance air filters and cold air intake systems.
    The world-famous High-Flow Air Filter™ was pioneered by K&N in 1969, and features an innovate design of layered, oiled cotton media to effectively capture dust, dirt, and contaminants-offering top-quality filtration.
    Since that time, K&N has grown into a world-class automotive technology company, selling air filters, cabin air filters, oil filters, and air intakes in over ninety countries-with nearly 10,000 unique products for cars, trucks, motorcycles, outdoor equipment, and industrial applications.
    With a strong Consumer Protection Pledge and industry leading warranties, K&N commits to quality, reliability, and customer satisfaction.
    Whether you’re looking for an air filter upgrade for your Ford Mustang, a new air intake system for your Chevy Silverado, or an Electronic Carburetor Injection system for your classic Pontiac GTO, you’re sure to find high-quality parts from K&N to propel your vehicle’s performance to the next level. Check out www.knfilters.com to find all of the parts available for your unique application!
  • ยานยนต์และพาหนะ

ความคิดเห็น • 55

  • @christopherv.bellido1682
    @christopherv.bellido1682 5 ปีที่แล้ว +73

    If he says "provided" one more time he's gonna catch this ass whooping "provided" by these hands

  • @mydogrush
    @mydogrush 6 ปีที่แล้ว +15

    I'm about to install this on my friends car. Thanks for the info.

  • @micdraypr1855
    @micdraypr1855 2 ปีที่แล้ว +3

    The CTS uses the same air box and filter as the CTS-V 6.2L S/C, so I'm not really seeing it being a restriction on a 3.6l NA

  • @manuelthodos5925
    @manuelthodos5925 3 ปีที่แล้ว +2

    what is the diameter of the pipe?

  • @juancarlosrodriguezfeorodr2393
    @juancarlosrodriguezfeorodr2393 4 ปีที่แล้ว

    Yo quiero ver el video pero con camaro 2001

  • @fathertrillx2988
    @fathertrillx2988 ปีที่แล้ว

    Need help i have this exact model part and a 2015 camaro v6 i cant find a water repellent filter sock for it anywhere if someone could help much appreciated!!

    • @KNfilters
      @KNfilters  ปีที่แล้ว

      Check out the following link for a compatible filter wrap www.knfilters.com/rc-5107dk-air-filter-wrap

  • @dketcham-sparky
    @dketcham-sparky 3 ปีที่แล้ว +1

    Do you have to disconnect the battery cable and why?

    • @KNfilters
      @KNfilters  3 ปีที่แล้ว

      Please contact our product specialists 800-858-3333 or tech@knfilters.com for assistance.

    • @kanoelaniramos5924
      @kanoelaniramos5924 3 ปีที่แล้ว +1

      yes usually because it may mess any electrical stuff in your engine or something like that. usually when u handle wiring or removing and adding things, disconnecting your battery and waiting a bit is the best way to handle it. if that makes sense. your second question, i think you just need to pull it out. but double check to be sure! hope that helped

  • @jesswalk1068
    @jesswalk1068 3 ปีที่แล้ว +3

    Will it fit a 2015 rs Camaro

    • @KNfilters
      @KNfilters  3 ปีที่แล้ว +2

      Yes, this system will fit a 2015 Camaro 3.6L

  • @stsblkpanda
    @stsblkpanda 4 ปีที่แล้ว

    I can’t find out where to add my k/n oil filter at I put the air filter on but u cane with small one too I gave 1998 z28 LS1 Camaro

    • @KNfilters
      @KNfilters  4 ปีที่แล้ว

      Please contact our product specialists at 800-858-3333 or tech@knfilters.com for help with your question

  • @graphicsgod
    @graphicsgod 6 ปีที่แล้ว +4

    Why would you need to disconnect your battery?!?! Unless doing so resets the computer I guess to learn the increased airflow.. but technically it should auto learn and make adjustments on the fly.. Can any mechanic comment on this..

    • @rayjax_2020
      @rayjax_2020 6 ปีที่แล้ว +1

      graphicsgod I’m not a mechanic myself.. but I’m very interested in mechanics.. I may have a answer, if u don’t disconnect the negative battery and just install the cold air intake itself.. when starting it, it will pop up the check engine light, which u will have to reset it for 10 or 20 minuets... Note: this isn’t actual answer, this is my possible answer for your question.. hope that helps! :)

    • @graphicsgod
      @graphicsgod 6 ปีที่แล้ว +1

      D4RK KN1GHT 52 Just did this mod and no engine lights were triggered, nor any issues have happened! If anything it sounds soo good and feels like I have more power due to the increased air flow! I'm not sure if the computer compensated for the increased air flow or not, due to the fact I did not disconnect the battery..

    • @rayjax_2020
      @rayjax_2020 6 ปีที่แล้ว

      graphicsgod hmmm..but if it theres isn’t a triggered check engine light or anything then ur all good.. but the computer part I’m not to sure about that... my previous answer was a maybe answer for you. But like I said if there’s no engine light ur good to go

    • @wilbs1959
      @wilbs1959 3 ปีที่แล้ว +1

      all mods recommend disconnecting battery so you dont cause a short

  • @marcosluna577
    @marcosluna577 3 หลายเดือนก่อน

    Would a 2020 k&n v6 air intake fit a Camaro 2015 v6 lt

    • @KNfilters
      @KNfilters  3 หลายเดือนก่อน

      Yes this system will fit a 2015 Chevrolet Camaro 3.6L. We have several systems for that vehicle, check them out on the following page
      www.knfilters.com/chevrolet/camaro/3.6l-v6-gas/2015/

  • @dketcham-sparky
    @dketcham-sparky 3 ปีที่แล้ว

    Another question, you said just to remove the bottom of the old air box, 2 nuts on top, but what is holding it in the bottom???? I can't get it out..

    • @KNfilters
      @KNfilters  3 ปีที่แล้ว

      please contact our product specialists 800-858-3333 or tech@knfilters.com for assistance.

  • @PsychoticTony
    @PsychoticTony 7 หลายเดือนก่อน

    Does this fit a 2015 Camaro LT V6?

    • @KNfilters
      @KNfilters  7 หลายเดือนก่อน

      Yes this system will fit a 2015 Chevrolet Camaro 3.6L. Check out the product page on our website www.knfilters.com/57-3078-performance-air-intake-system

  • @okthenwhatever6270
    @okthenwhatever6270 3 ปีที่แล้ว

    How about 2015 v6?

    • @KNfilters
      @KNfilters  3 ปีที่แล้ว

      Check out the following page www.knfilters.com/chevrolet/camaro/3.6l-v6-gas/2015/

  • @milk-sq7pb
    @milk-sq7pb ปีที่แล้ว

    tryna install cold air intake on my 97 camero rs

    • @KNfilters
      @KNfilters  ปีที่แล้ว +1

      We don't have a kit for a v6 car but if you have the 5.7L v8 check out the following www.knfilters.com/57-3010-1-performance-air-intake-system

    • @milk-sq7pb
      @milk-sq7pb ปีที่แล้ว

      @@KNfilters ok thanks, would u recommend a cold air intake on the v6? i can get and install my own pieces i'm just not wanting to spend the money for something not worth it

    • @KNfilters
      @KNfilters  ปีที่แล้ว

      Please feel free to contact our Product Specialists at 800-858-3333 or tech@knfilters.com with your question for a detailed answer and support.

  • @mantran8495
    @mantran8495 5 ปีที่แล้ว +5

    How much is this? K&N products are too expensive.

    • @browym5075
      @browym5075 4 ปีที่แล้ว

      Man Tran 300

  • @salemrose196
    @salemrose196 3 ปีที่แล้ว

    Will this fit on a 2016?

    • @KNfilters
      @KNfilters  3 ปีที่แล้ว

      No, this will not fit a 2016 Camaro 3.6L. Check out the following page for products that will : www.knfilters.com/chevrolet/camaro/3.6l-v6-gas/2016/

    • @salemrose196
      @salemrose196 3 ปีที่แล้ว

      @@KNfilters okay thank you!

  • @rayjax_2020
    @rayjax_2020 6 ปีที่แล้ว +5

    Omg stop saying "the provided hardware" and say the name of the tools. Would be more helpful

  • @DanielRivera-ql4xi
    @DanielRivera-ql4xi 3 ปีที่แล้ว

    Its out of stock...

  • @right_angle-_-7355
    @right_angle-_-7355 3 ปีที่แล้ว +1

    Does this work on a 2011

    • @KNfilters
      @KNfilters  3 ปีที่แล้ว

      No this part will not work on a 2011 Chevrolet Camaro 3.6L, however there are a number of intake options for that vehicle. Check out the following link: www.knfilters.com/chevrolet/camaro/3.6l-v6-gas/2011/

  • @jdm2000ek
    @jdm2000ek 3 ปีที่แล้ว

    Why does my car keep turning off

    • @KNfilters
      @KNfilters  3 ปีที่แล้ว

      Please contact our product specialists at 800-858-3333 or tech@knfilters.com. They will be able to quickly help you resolve the issue.

    • @saldanapete10
      @saldanapete10 3 ปีที่แล้ว

      Did you ever figure out what the issue was?

    • @matthewsparks113
      @matthewsparks113 2 ปีที่แล้ว

      My car ran great before install and now it will idle inconsistently and stall out shortly after starting. I disconnected the negative terminal during install and my car won't accept new part. CEL also came on for P0102 MAF sensor readings. I double checked that there isn't any loose connections and sensor has been cleaned. Any suggestions?

    • @Thatloudv6maro
      @Thatloudv6maro 2 ปีที่แล้ว

      @@matthewsparks113 did you make sure you put the mass air flow sensor in the correct way

  • @jessieismyfriend
    @jessieismyfriend 2 ปีที่แล้ว

    waste of money if you don't have the car tuned properly for this mod......

    • @KNfilters
      @KNfilters  2 ปีที่แล้ว

      All K&N intake systems provide a guaranteed increase in horsepower and torque with factory ECU settings. This system has been tested to provide an increase of 13.14HP and 14.44 LBFT. Check out the dyno chart on our website kandn.com/dynocharts/57-3078_dyno.pdf

    • @jessieismyfriend
      @jessieismyfriend 2 ปีที่แล้ว

      @@KNfilters why should anyone trust YOUR dyno charts ???? Unless the car is tuned for the mod NO one will see an increase in HP.....in fact they may see a decline in performance......... FACT !!!

    • @jacobcardenas9697
      @jacobcardenas9697 ปีที่แล้ว

      @@jessieismyfriend I wanna get a cold air intake for my 2015 Camaro so should I get a tune first before I even get the intake?

    • @jessieismyfriend
      @jessieismyfriend ปีที่แล้ว

      @@jacobcardenas9697 get the air intake installed and then have it tuned by someone who knows what they're doing

  • @rayray2587
    @rayray2587 5 ปีที่แล้ว +9

    Bruhh it sounds the same 😂😂😂

    • @cameronsloan1873
      @cameronsloan1873 4 ปีที่แล้ว +11

      No it doesn’t lol

    • @electro740
      @electro740 3 ปีที่แล้ว

      @@cameronsloan1873 yeah it definitely didn't make any difference in sound

    • @giooodaplug7988
      @giooodaplug7988 2 ปีที่แล้ว

      You mad?