Build a Night Vision Ready Bump Helmet For Just $100!
ฝัง
- เผยแพร่เมื่อ 30 ก.ค. 2024
- VISIT MY WEBSTORE! aanv.us
Want a helmet to run your PVS-14s, but too cheap to pay for an Ops-Core or Team Wendy helmet?
Is your wife about to divorce you for maxing out your credit cards on night vision accessories?
Follow me as I show you how to build a comfortable, NODs ready bump helmet for $100! (PRICES AS OF MARCH 2023)
Please like and subscribe!
Check me out on Instagram / angryasianfab
CHAPTERS
0:00 Start
0:44 Webstore Update
1:36 Bravo Airsoft PJ Helmet
6:37 Bisu Dial Suspension System
15:26 FMA Combat EX Helmet Pads
20:22 Helmet Fit Adjustments
23:39 1-Hole Shroud Install
30:58 ACH & Bump Helmet Compatibility
31:48 EOG Low Profile Counterweight
33:52 Testing
34:54 Results
37:59 Conclusion
BUILD PARTS:
Bravo Airsoft PJ V3 Helmet
amzn.to/3yrkp7I
2" Wide 4ft Velcro Roll
amzn.to/3TovQqu
Bisu Tactical Helmet Dial Suspension System Chinstrap
amzn.to/3F9B2ZB
FMA Outdoor Combat EX Helmet Internal Memory Foam Pad
amzn.to/3ZVQC2X
Permatex Ultra Black RTV Silicone
amzn.to/42pPIha
EOG Low Profile NVG Counterweight
eogvb.com/products/low-profil... - ยานยนต์และพาหนะ
maxxing out your credit card is 100% american! lol
Lol when I bought my 14 back in November, my brother gave me that Ghost look that was going around in memes 😂
Payed it off by the end of December so all was good, my credit went up 30 points because of it.
Its just money, they'll print more.
Fact, I max mine out every month on cool guy gear and kit, and guns and ammo.
Spot on dude! I got an FMA for $60, fully expecting Junk, but it's secure and balanced! actually impressed...I only need it for stargazing and casual exploring shit......also spent $40 for used surplus Norotos Rhino mount. I'm running Sionyx Aurora, not PVS...so made a custom "arm" piece coming off the Rhino, because a PVS J-Arm obviously makes the Sionyx sit crooked....But anyways, the stock helmet fits my head perfect, maybe after a few hours I will change my mind and want to upgrade cushions, but for now it's good, I just wanted to achieve hands-free....I'm only invested in around $100, i'll risk that all day long.
when that bolt rolled and fell into the hole on your desk I busted out laughing lol
Thats the kind of stuff that happens to be on the regla
I'm a welder and I have those fab tables with all the holes in them, dropping shit through them is a daily occurrence!
21:51 gotta be my fav quote
That and "good enough for government work"
8:54 hole in one
gonna give it a whirl , ordered a lancer helmet like fiddy bucks , got that spare norotos 1 hole and tatm
Thank you.
Another great video, thanks brother! YT is about the only thing I actively use as far as “social media” I hope you post an announcement/short on here when you launch the store.
You got it!
Thanks for this.
Great video keep the knowledge coming. Trying to get my buddy up and running with nods but he broke as tree hugger. Let us know when your store is up and running I want to order two pvs14 from you
Very good video on the ins and outs of building something up from parts. This will definitely help people. I've been researching a cheap build for almost a year, just trying to get the right parts from all different directions.
This will be the start of my night vision journey, so just trying to get this part right without spending an arm and a leg.
honestly i want a pvs-14 but i went with the chinese knock off first, should be arriving somewhat soon but when i do get some decent extra cash i might buy a real build kit but for now this will have to suffice for recreational activities.
Yea! For web store!
Thanks for the vid!
Thanks for watching!
Great video, I love your stuff. I would love to try some of these builds and would love to buy some you put together as well. When your store is up and running your next issue will likely be keeping things in stock. Thanks for the videos.
Haha yeah well see! Thanks for watching!
Can’t wait to buy open her up🎉
I found the channel from the webstore😂.
For counterweights you can use duck decoy weights or wheel weights from harbor freight
Wrap them in electrical tape then slap Velcro on it
In Trashcanistan some guys used spent AA and 123 batteries. Cover them in 100mph tape, stick on velcro, good to go.
@@angryasianfab Damn.. not a bad idea🤔
What’s your opinion on doing a CVC conversion?
I'm not a big fan of drilling holes in ballistic helmets. If I wanted to save money on a high cut, I would get an ACH or PASGT and send it to kustomach.com
The 50 dollar team wendy bump helmet from china in question:
Personally for me I hated the black pads I only used the back black pad, the rest of em made it sit way to high up my head I tried adjusting them in different places and it didn't do much but made it worse, but on my ballistic helmets i only use one black pad on my pasgt, and ACH helmet I use the rear black pad. I also have a lshz1+ bump helmet that helmet I just left alone since it's not worth making any better, but once I get a high cut ballistic helmet I'm gonna probably end up going with team Wendy knock off padding, and use gentex h nape harness I use gentex h nape harness on all my ballistic helmets they work good
For ballistic helmets go with real deal pads not knock offs! Legit pad manufacturers build to specifications for their pads to reduce blast/trauma and TBIs. I don't mind going cheap on a bump helmet for dicking around, but don't go cheap for your real deal bullet deflector. I talk more about this in my high cut helmet video.
@@angryasianfabI saw you recommended the 4D pads in another video and provided a link, but there's a bunch of options there-is there any one set you're particularly fond of?
@@AEtrane I'm running the 4D Hive Retrofit 3/4" pads currently in my ACH and like them. I've heard some complain about the kits with the long forehead pad being a sweat sponge but that probably varies from person to person.
@@angryasianfab i ended up replacing the pads with some actual team Wendy pads on my pasgt I converted into a high cut, I also bought a nice ops core improved h nape, ops core VAS shroud, and a set of ops core ACH arc rails, and industrial grade Velcro for it. My ACH I switched to skydex pads as well, and replaced the h nape with a new ops core h nape, and called it a day added my norotos universal shroud to it. My bump helmet I bought a cheap one as well sold my gearcraft grey shop garbage for a $50 tactical bump helmet, added a good norotos 3 hole universal shroud, and I just put my knock off team Wendy helmet pads in em and used my gentex ACH helmet h nape that I had on my pasgt before I converted it into a high cut. Pretty much used what I had laying around and my airsoft grade arc rails that used to be on my chopped up pasgt high cut helmet now on that.
@@angryasianfab I have skydex 4d pads in my MSA Surplus ACH as well they were on eBay as new old stock good pads, but I bought real team Wendy pads for my pasgt converted ballistic high cut helmet
The city recently broke up my nearest homeless colony, so no nightime stick poking for me until the next one forms 😢
Come to WA then, they care more about bums than hardworking citizens here.
@Angry Asian Fabrication yanno, people back home they ask me, "why do you do it man?" And I don't say a God damn thing. Because they won't understand, that it's about the bum next to you. At night. With NODS. Poking him with a whittled stick. And that's all. That's all of it.
PTS mtek flux gets good reviews $120
Just looked it up. Pictures look nice...
@@angryasianfab it’s licensed from mtek & all the hardware/accessories are interchangeable with the real one