I wouldn't sell anything I wouldn't run myself. I've gotten some beat up mounts over the years that I was able to rebuild to work like new. Thanks for the reply.
I saw poor and I clicked. Night vision is the last piece of important equipment that I desire for my loadout I decided to put myself at a disadvantage and go the budget route but I want to make sure that I get the most bang for my buck
Yo sir. Slight highlight for your video. Just ordered anotherr set of 1431s for my son and the builder in texas tossed in a tatm mount . Just didnt have a shroud. TNVC has them marked down to 40 bucks right now from 200. Most likley till there gone. Wont be getting more. If you happen to require one . Nows the time to strike
If someone who already owns Gen3 NV (single PVS14) and was looking to maybe get another would you make duals or would you just use it as another setup for a loaner or for a teammate?
I don't have that kind of disposable income lol. But it seems Wilcox mounts are the ones that are often copied. Key give away is the logo, some knockoffs don't laser the "X" correctly.
@@angryasianfab yeah I more or less meant knockoff Wilcox vs rhino II modded to dovetail I’ve heard if you get a good knockoff & locktite everything there GTG
So when buying ach I see some brand new ones in eBay for about 250 what do u think about padding and shit? This is the route I'm gonna go. Then maybe get a bump helmet
Great video man. I was wondering, do they make a mount that you know of where you can run 2 pvs14 at the same time to have both eyes or would ya have to buy different dual tube nods?
@@jakekirk9847 its an 8-32 countersunk screw, 5/16" of thread exposed. You'll need a matching t-nut if you don't have one for the inside of the helmet. I'll have these small, overpriced every place else items on my webstore available, hopefully as soon as next week!
night vision is so confusing and expensive. If you can sell something used and eliminate a lot of the hassle of knowing how to piece together parts that would probably help us out a lot
@@angryasianfab Haha Thanks!! I can't wait until you open your E-Store so I can give you some money. I'm gonna be looking to buy a PVS-14 here real soon.
You’re the freakin man bro , cracking open a PBR 😂
My cheap beer of choice.
Not gonna lie I've been getting nostalgic about my time in seeing that helmet setup brings me back
RLTW!
You should absolutely sell parts and NODs as long as you’re very specific with the condition of them.
I wouldn't sell anything I wouldn't run myself. I've gotten some beat up mounts over the years that I was able to rebuild to work like new. Thanks for the reply.
Bro you’ve given me hope in so many ways i honestly was feeling defeated on getting into night vision
Webstore's coming soon!
Go for it man! I always ran the gen 1 with usgi mount as issued, but never really cross-talked about other versions so learned a thing or two. Thanks.
Thanks for the reply.
Thanks!
dude go for it I'm gonna be your first customer
That black “holess” mount is still issued in some units
I did find a Rhino "1.5", a Rhino I prototype of the setup of the Rhino II, allowed for height adjustment on the Rhino I
Awesome! Cool to find those rare mounts how there.
I saw poor and I clicked. Night vision is the last piece of important equipment that I desire for my loadout I decided to put myself at a disadvantage and go the budget route but I want to make sure that I get the most bang for my buck
If you can build a PVS-14 yourself you can save a lot of money to go towards other things, like IR lighting, or even a new gat.
Great vid thanks for the help. You went into detail on the differences and that was great!
Love the idea of the store. Also have an in person training to teach others.
Stores open! AANV.US
Excellent video for noobs like me. You just saved me from buying a norotos rhino 1 mount that is mislabeled as a rhino 2 mount for $85 on ebay...
Glad to help. I sell these mounts on my webstore too aanv.us
Yo sir. Slight highlight for your video. Just ordered anotherr set of 1431s for my son and the builder in texas tossed in a tatm mount . Just didnt have a shroud.
TNVC has them marked down to 40 bucks right now from 200. Most likley till there gone. Wont be getting more. If you happen to require one . Nows the time to strike
I saw that, they got the 3 hole variants. I got a 1-hole variant on my store right now aanv.us thanks for the heads up.
If someone who already owns Gen3 NV (single PVS14) and was looking to maybe get another would you make duals or would you just use it as another setup for a loaner or for a teammate?
Both, I would get a bridge so you can mount two PVS-14s, but one that easily allows the removal of a single nod so you can pass it off if needed.
Would love surplus mounts vs Chinese clone mounts video
I don't have that kind of disposable income lol. But it seems Wilcox mounts are the ones that are often copied. Key give away is the logo, some knockoffs don't laser the "X" correctly.
@@angryasianfab yeah I more or less meant knockoff Wilcox vs rhino II modded to dovetail
I’ve heard if you get a good knockoff & locktite everything there GTG
So when buying ach I see some brand new ones in eBay for about 250 what do u think about padding and shit? This is the route I'm gonna go. Then maybe get a bump helmet
Check out Pt 3 of the series on my $100 bump helmet. Part 4 will be coming soon covering ACH/MICH helmet builds.
Great video man. I was wondering, do they make a mount that you know of where you can run 2 pvs14 at the same time to have both eyes or would ya have to buy different dual tube nods?
Yes, what you're looking for is called a "bridge" and I did a video about one here: th-cam.com/video/G_qkiwVaOpM/w-d-xo.html
@angryasianfab Right on. Thanks man.
Thanks for the video
Yes
Thanks for the reply.
About the Norotos rhino I mount, aren't they like 200$ or like that (the real ones)?
Maybe brand new in the original box from a licensed retailer. I'll be selling them for around $60 refurbished.
@@angryasianfab ohh
You find them WAY cheaper than $200 on ebay...$200 is too high, even if it was real. His prices were legit from what I've seen
@@angryasianfab can you also ship them?
@@Nperez1986 oh
Send it on the web-store man.
Thanks for the feedback!
Do you know the size of the screw for the norotos universal shroud?
Center 1-hole or 3-holes?
@@angryasianfab the center 1 hole
@@jakekirk9847 its an 8-32 countersunk screw, 5/16" of thread exposed. You'll need a matching t-nut if you don't have one for the inside of the helmet. I'll have these small, overpriced every place else items on my webstore available, hopefully as soon as next week!
@@angryasianfab hell yeah man, I appreciate the info!
night vision is so confusing and expensive. If you can sell something used and eliminate a lot of the hassle of knowing how to piece together parts that would probably help us out a lot
That's the plan! Been working hard on the webstore this week, hope to be live by next weekend! WWW.AANV.US
What brand are those bungees you are using on the ach?
There's a dude on ebay who sells them, I think Battle Bungies?
Was that Khowst 2010?
Correct year, but if I recall correctly that was out of Sharana so not too far.
The nut is called a "T-nut".
"Deez nuts"?
@@angryasianfab Well done!!
@@harrydickinsider5848 This might be the best username I've ever seen...
@@angryasianfab Haha Thanks!! I can't wait until you open your E-Store so I can give you some money. I'm gonna be looking to buy a PVS-14 here real soon.
cool video man, its real confusing tryin to figure it all out for sure, easier to do brain surgery
Am i the only one that noticed or he is changing thr pronouncer of NOROTOS every time? 😩
Been waiting a year for someone to say something lol.
Dont confirm the stereotype!
Norō Tōs 祝女 まで
Narutoss
Nair At Us
Naruto's Toes
Nostromo Tatum
Nostradamus
Norotos (lame)
Nrrrr Uhh Autös
Spray and Pray phonetics 😂
Glad you got it lol
@@angryasianfab haha took me a second, love the videos dude
A pvs-14 is not plural, and it is not a set.