Automatic Water Level Controller for Submersible Panel having ON and OFF with Dry Run Protection
ฝัง
- เผยแพร่เมื่อ 13 ธ.ค. 2020
- Automatic Water Level Controller for Submersible Panel having ON and OFF with Dry Run Protection
Hey guys,
Today, I am going to show you Automatic Water Level Controller for Submersible Point with Dry Run Protection Sensor.
Dry Run occurs when a pump operates without adequate water. This leads to surge in a pressure, flow, or overheating that will instigate pump failure.
Dry Run is a type of protection used to prevent motor, pump, panel from damage.
Dry Run importance is to save electricity whenever the pump run dry. It will sense and motor will be safe.
Circuit Diagram is also present in video.So, watch full video.
Hope you like it.
Please subscribe to my channel for more upcoming videos.
Don’t forget to click on bell icon to get notified on all latest video uploads.
------------------------------------------------------------------------
For Purchasing and some queries Contact here:
Gmail: prabhak0827@gmail.com
If you want to purchase a complete assembled PCB of any Circuit Diagram that I explained in previous videos.
Then Kindly Email me.
---------------------------------------------
Gmail
prabhak0827@gmail.com
Invest with Grow
groww.app.link/refe/prabha476...
Facebook
/ prabha.kushwaha.902819
Follow on Facebook Page
/ prabha-knowledge-point...
Follow on Instagram
/ prabha_knowledge_point
Subscribe on my channel.
/ prabhaknowledgepoint
---------------------------------------------
Useful Link:
12 V DC RELAY
amzn.to/2WrRlKt
24 V 30 A RELAY
amzn.to/2KxCBXF
9-0-9 TRANSFORMER
amzn.to/3r5EawF
24 V DOUBLE POLE RELAY
amzn.to/2LCBVAK
Variac:
amzn.to/3b3AZAj
25 A Relay for Stabilizer
amzn.to/3b33DkV
9-0-9 control Transformer
amzn.to/3oalp9r
Digital Multimeter
amzn.to/3n7BVpG
Volt-Meter
amzn.to/3b1p7hZ
-------------------------------------
Related Videos:
Automatic water level controller using dry run protection
• Automatic Water Level ...
Automatic Water Level Controller
• Automatic Water Level ...
Automatic Water Level Control for Submersible Panel ON & OFF Push Button Switch with Circuit Diagram
• Automatic Water Level ...
Automatic Voltage Stabilizer Setting with Circuit Diagram
• How does Automatic Vol...
Servo Stabilizer with working principle and circuit diagram
• Servo Stabilizer/ Serv...
P-1 How to Connect Water Level Controller to Municipality Water Supply/Municipality Water Controller
• P-1 How to Connect Wat...
P-2 How to Connect Water Level Controller to Municipality Water Supply/Municipality Water Controller
• P-2 How to Connect Wat...
#dryrunprotection
#fullyautomatic
#dryrunsensor
#submersiblepanel
#saveelectricity
#circuitdiagram
Most helpful videos please share and like videos sir ko support kare
Sir ji aap ne bahut mehnat kar ke project bnaya hai, DIL se dhanyawaad, sir ji isska complete circuit diagram component ki value ke saath mail kar dijiye, thanks
Sir apki video ros dekhta hu bahut gayn milta hai, agar ya circuit ko pdf file mili to bahut khus hota . Love from nepal
Thank you for sharing your knowledge. Would you be so kind to indicate in the diagram of your videos the name of the components. This is relevant for those of us who do not speak your language. Thank you again.
Thank You So Much Sir.
😊😊
Very good idea and no one has published automation for push switch. But what is the use circuit with out values of components?
Excellent sir
Thank you
Thank you for your kind cooperation
Welcome 😊
Very nice keep it up
Thank you
Sir send me full details of the circuit with component details.
Very nice explanation, plz send the circuit diagram
👍👍👍
☺️☺️
I already subscribed your Chanel
Thank you so much .
Sir Can you design a wireless water level controller for contactor type submersible pump starter with dry run protection
Sir electronic parts k related basic video banaye...
Yes, very soon.
Good circuit sir can you send me components details with circuit
Water controler curcit for
Dryrun
Three fase submarsibal ka
Pdf chahiye
Thanks
Sir please send full circuit diagram
Sir can you please make this circuit into wireless water pump controller with water level indicator.. make a video Sir
👍 good , can I get full circuit
Yes off course.
Mail me on the Email provided in description .I will send you PDF of circuit diagram.
Dear Dada
please share the circuit & components details. Your video very nice.
Thank You so much
Please mail me on the Email provided in the Description Box then I will send you PDF of Circuit Diagram.
ch.mandal83@gmail.com, this is my mail I'd.
So, Please share circuit diagram & components details
I have sent the pdf.
Sir complete dijiye jisme water motor kaha se outmilega dry run senser ke sath pura diagram send kijiye
Ok I will send you soon
Sir send me full details of the circuit with component details and values
Please complete value circuit diagram
th-cam.com/video/-Dk2FbuuA6w/w-d-xo.html
Here I have show you all components and its values and I also show you full tutorial of assembled the circuit and its working.
how much price?
What is the value of components
Pani hi fir bhi dryrun ka problems aa raha hi
Aani aata hi or or auto off hota hi kay problems hi..dry run endicetar aata hi
If water is not coming dryrun will activated after nearly 2 minutes. For testing the circuit short common and dryrun sensor.
Please send me circuit digram pdf
Hi Sir Nice video. Can you please add LEDs to indicate the level of water in the tank like Tank FULL, HALF, EMPTY.
I will make a video of water level indicator
@@PrabhaKnowledgepointSir please reply to my E-mail..
I will send you mail very soon
@@PrabhaKnowledgepoint Thanks a lot for the Mail...
pin13 aur14 pr kitna ohm ka resistor hai
2.2M
Sir many many thanks for sharing the circuit diagram (Dry Run Type). I am facing some issues. Everything is working fine but Issue_01: After pump on when water touches the lower sensor (Start Sensor) it stops the pump. It should stop the pump after touching the high Level cutoff sensor. Issue_02: I'm getting 5V in pin no-3 of IC 4081. But as per your previous video dated 27 Nov 2020 th-cam.com/video/ky6NJqVbk_0/w-d-xo.html (Time 4:00 -4:06) it should be 10V. Issue_03: After pump on I'm getting 8.80V across coil Relay 01 and 7.18V across coil Relay 02 (Double pole/4 Second Hold then off). So Please suggest in this regard.
Good work plz send me circuit diagram
Please Mail me on the Email provided in the description box.
@@PrabhaKnowledgepoint sir mail sent
as question asked by you on mail pin number 10 will become 0 because Pin 8 will get supply through diode connected between pin 10 and 8 the pin 9 is already high .So pin number 10 will not become 0
Ji logo ko components ki value chahiye vo sir ko mail kar sakte he vo aapko pdf file bhej denge
Mujhe chahiye
good work. can you send me circuit diagram with values of components?
I have sent.
Super pls sir send circuit with components value ic num used in this circuit pls
Please mail me on the Email provided in the description box. I will send you pdf of circuit diagram.
@@PrabhaKnowledgepoint excellent circuit, Sir can you send the circuit diagram and component values. Thank you Sir
My mail id - jayanunnithan86@gmail.com
@@PrabhaKnowledgepoint sir please send me the circuit diagram details with component
Please sir diagram share kijiya
very nice project sir
please share the circuit design & components details. with values recently u have sent a new doc pdf but it is password protected
awlc
Please send me pdf
sir, please add components values
Excellent work bro, need circuit diagram mail sent pls reply
I have sent the pdf of circuit diagram.
@@PrabhaKnowledgepoint bro you have sent the wrong circuit diagram pls send correct one.
You have to mention the title of the video for that you want circuit diagram.
Then I will send you
@@PrabhaKnowledgepoint bro I Already mentioned in mail I sent.:-) .I sent mail again for diagram.
I have sent.
Sir i liked your this video and explaination, please send me the circuit details.Mail sent to you,please reply.
Circuit diagram sent on your mail.
Pls phone number
Sir the circuit diagram is confusing. Can you please provide me the pcb design
Please mail me on the Email provided in the description.
Can you share the circuit diagram with values.
I have sent .
Please send me pdf
Hi sir can you sent me circuit drigram, components value, yesterday allready sent you, please help
th-cam.com/video/-Dk2FbuuA6w/w-d-xo.html
Here I have show you all components and its values and I also show you full tutorial of assembled the circuit and its working.
apne ek tric use kiya hai ya scr hai
symbol to scr ka hai
It is scr.
SCR
@@PrabhaKnowledgepoint value of scr
NTE5400
Sir please give me the circuit diagram details on PDF,
Please mail me on the Email Provided in the Description. Then I will send you PDF
Sir u can send me micro controller progrraming code and spareparts list with digram circute pdf file
The circuit is based on digital gate IC.
Diagram dijiya
Sir can I get full circuit diagram
Please mail me on the Email provided in the description. I will send you the PDF of circuit diagram.
Sir please share pdf file with components details
Please can u send me resistance value and diagram
Please mail on the Email provided in the description, so that I will send you circuit diagram with PDF.
Sir circuit m comments ke details degia please. Ic no etc complete details
Please email on the mail provided in description
Dear sir please send me circuit diagram. Thanks
Please mail me on the Email provided in the description
SCR VALUE?
SCR NTE5400
Value of all comments
th-cam.com/video/-Dk2FbuuA6w/w-d-xo.html
Here I have show you all components and its values and I also show you full tutorial of assembled the circuit and its working.
Sir please send me circuit diagram pdf with components details
Circuit diagram sent
bhai aap ji circuirt shere kr rhe hai vo es circuit se mathch nhi jkr rh ahai
I have removed one relay and it's work is done by transistor to reduce the cost.
@@PrabhaKnowledgepoint you should try to send updated circuit plese
@@PrabhaKnowledgepoint 555 IC PR APNE D4148 ka anode pin 3 pr kyu diya hai
4148 ka cathode hona chahiye
@@PrabhaKnowledgepoint 14 pin ic number
?????
How to increase the dry run cut off time to 1½ minutes
Increase dry run time you can change 47 mfd to 68 mfd.
You can change 47 MFD to 68 MFD.
Sir pleases circuit diagram send mail
Please mail me on the Email provided in the description. I will send you the pdf of circuit diagram.
aapko prabhak0827@gmail.com par mail Kiya deliver nahi ho raha muje assembled circuit chahiye kya price rahega
WhatsApp no