Saw 2: Lego Technic Saw vs Objects!
ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2021
- Extremely powerful Lego technic Saw with 14 powered up motors and 6 smart hubs!
I’m using the Lego saw blade this time to see if it’s better than my first attempt!
Be careful if trying something like this! The blade was surprising quite good despite looking quite flimsy!
#lego
#lego experiments
#lego Technic
#lego tank
#lego car
#lego moc
#extreme brick machines
#lego spinning wheel
#brick experiment
#lego engine
#rc
#lego
#experiments
#legoTechnic
#tank
#legocar
#legomoc
#extremebrickmachines
#legospinningwheel
#brickexperiment
#legoengine
#rc
#legoflywheel
#legoclutch
#legoexperimental
#legostarwars - บันเทิง
![คบซ้อน - วงL.กฮ. [ Official MV ]](http://i.ytimg.com/vi/5MtesqJ0I1c/mqdefault.jpg)
imagine making a sawstop mechanism for this
Edit: I just witnessed this video go from 100k to 1 mil in like 3 days
Hey Puzz! I’ve never seen that before! That’s hard to comprehend how that mechanism works so well!
Your channels flying too 100-120k in no time!😀
I think you would need a metal blade for tgat
@@jacobstephens7153 yeah, I think it uses the conductivity of the blade for it
@@RainyCobra Yeah there's probably a different one that doesn't use conductivity but idk
I spent ages watching videos on this! Still hard to comprehend how quickly it happens!
Neighbor kid comes over to play. Mom-"what are you kids gonna do today?" Son-"were gonna play with Legos Mom." Mom-"Oh OK kids. Have fun." Moments later screaming and the neighbor kid is missing 2 fingers.
😂😂
@@RecRoom_Stuff Clearly you've never stepped on one, it's a fate worse than death.
Lmao
Me, the nurse: What happened?
@@Nurse_Xochitl 🤣
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
Attach a flywheel like a tire of some sort to the main drive axle. Then, when it powers up it will store energy in the tire, allowing for a more stable rpm when cutting through tough objects. It will have a much easier time that way and will be much more efficient as the flywheel will add extra tourney when needed.
extra tourney
As a Student that goes to Iowa I’m so sorry about your guys’ season, tough way to end it
extra tourney
So much tourney
The cardboard sounds is exactly like what Lego would do if they could cry..
And i love every second of it
the slight *ding* at the end makes it funnier
it brings me immense pleasure
Doesn't the cardboard sound like aliens
The carrot is what them shooting diarrhea sounds like
The legos to build this probably cost more all together then just buying the tiny table saw from harbor freight lmao..... But there's something about building real world things out of legos that I think is pretty cool, maybe not efficient but very cool.
Lol
Yeah I totally agree, you might like my next build too😀
The Lego one will be stronger though
@Repent to Jesus Christ Repent to Jesus Christ can you not be religous in the comments section?? Who knows, maybe they dont allow religous speach or they arent christian or whatever. So STOP promoting christ everywhere you go because that isnt gonna get much people into that religion. (I dont know why i got so mad over this lmao)
@@formostire3 Stop worshipping LEGO saws! Repent!
Lego Company: Our toys are very safe and will never harm anyone
Complaint's Evidence:
i think that the main problem with this is that the saw does not have that much momentum, so if something stops it the saw will have a hard time cutting through. i would suggest adding some sort of weight (lego wheels maybe) to the spinning axles to give it more momentum and have more cutting force.
Exactly that! A flywheel would be good!
As if stepping on Lego wasn't painful enough, this guy made them into a POWER SAW
mosquitoes at night be like: 0:47
Lol true
Nobody:
The mosquito in my ear at 3:00 am: 1:56
It works very well, but if the blade was sharpened, im sure it would cut much easier
Instead of the plastic saw, give a thin papersheet a try. At that rotationspeed it could cut through wood but be very, very careful. You could really hurt yourself badly
Hey there I didn’t know about this paper blade business so I will give it ago thankyou 😀
@@GazRsExtremeBrickMachines the paper has to be fastened really tightly, otherwise it wouldnt cut anything. I dont know if it will work with a circular blade
But with a well balanced strip it should work like a charm. Be aware that it could get small quite fast if you cut hard things like wood
Paper cuts, extreme edition.
@@marcobering3945 indeed. You really could lose a finger or more
I’m just trying it now! Super impressed😀
SAFETY NOTICE: do NOT move your object towards the rotational direction of a real saw blade. This can lead to kickback which can be deadly.
man aint nobody gonna use this video as advice for wood cutting, i understand safety is first but this is like posting “Dont forget that one hour of flight time should equal one hour of repair time!” on a Remote control Electric helicopter video, its only helpful if they were using the real thing.
Daniel this could not kick a fly back, the saw was cutting in the direction it cut best! The edge is far too thick on one side 😀
@@carlwheezerofsouls3273 that’s the most logical post Ive seen yet! Thankyou! I keep reading about kick backs and blade angles… this couldn’t kick a fly back as the torque is so low!
And a Lego saw is vastly different to a real saw! It’s leading edge is to thick!
I just cut the best way it cut 😀
@@GazRsExtremeBrickMachines and this is why you shouldn’t show bad practices on camera. Honestly, some kids could see this and try it with the real thing. How irresponsible. Stop playing with kids toys and get a real saw.
@@falcofurious if a kid gets hold of a real table that really should be a worry! If my kid got hold of table saw I’d blame myself not some random Lego video on TH-cam….
Also TH-cam has its own kids section now so if they’re watching adult TH-cam then that’s also bad parenting! But people nowadays prefer to blame someone else…
respect to this guy
he resisted the urge to put his finger on the blade
0:46 mosquitoes in my room when i try to sleep
Ages 3 and up has reached a whole new meaning
@Fuck You Google oh yeah gotta sue lego to make sure they don't sell materials for a 4 year old to build a saw and cut themselves on it
that one mosquito in your room at night: 1:53
"Stepping on a Lego doesn't hurt THAT bad."
The Lego:
Lego: “our lego toys are safe to use and play with, they’re considered choking hazards still”
GazR: “let’s see about that”
Stepping on legos is the worst pain.
GazR: hold my bricks...
😂😂
joke answer
Did this just pop up in everyone’s recommended at once????
Yes
Yep
Yup lol
Yep
Yea
If lego ever decides to make a saw themed movie they should definitely hire this guy
Never heard a lego construction cry this loud :)
Use a sharpened steel blade and it'll be just like a real table saw...
And several times more dangerous
That one mosquito at 3 am: 1:52
That blade is invincible
Top 10 world war weapons you weren't supposed to see
Cutting edge technology
Take my like and leave
...And in the next episode, we will demonstrate micro-neurosurgery with Lego tools.
Haha check my next video out on Sunday! Not quite micro surgery though but on its way lol 😀
@@GazRsExtremeBrickMachines I will. Thanks for the GREAT MACHINES YOU BUILD: Me and the WHOLE Community here!
A weapon to surpass metal gear
Modern sawblades usually tipped with tungsten carbide, so this was kinda surprising.
Look boys, fresh algorithm drop
Indeed
This is legit fresh
The comments are 1 hour old!
A man has fallen into an Industrial sawblade in Lego City, build the new Lego coffin and save lego city!
realtor: “and here we have 413 walnut street. Beautiful late European design, 2 floors and a finished basement, and it was made entirely using lego tools”
You should install a flywheel into the system to keep some of the momentum. That would simulate the weight of the blade.
Just commented exactly that.
Its 11 at night on a sunday and i have work tomarrow, yet here i am..
0:46 All I hear is a laughing Boo lol
No way 👀 That is so cool! LEGO is powerful!
Hey thank you very much I’m glad you like it :)
Damn thats is cool asf good job bro
But get this, make a metal blade for the Lego table saw, that's should fix any cutting issues.
I have made a metal blade! Video soon 😀
Work in progress 😀
2025 : *Robbing a bank with a lego gun*
0:45 sounds like my cat at 3AM lol
Lol and I thought my two waking up at 5am was bad enough!
XD
I know it’s lego, but the most common wood working tool to get injured on is a table saw. Yes the blade is plastic but it’s moving at 4350rpm. You may want to learn some tool safety before you post another video of you putting your fingers that close to the blade and cutting things from the back of the blade is a great way to make an object launcher.
This guy should know, he's a scholar
I think this has topped the singular red brick as the most dangerous LEGO
As a woodworker, running things through the saw backward made me cringe.
I turned the whole thing round if you didn’t notice, although the cucumber was cut the wrong way😀 Not enough torque to kick back here!
Same, except I ain't even a wood worker
lol i just watched the moment he uses saw backwards as looking at ur comment
“Father: Son we need a saw. Son:No need to spend money i have LEGOS!”
This took the "Ouch! I stepped on my Lego pieces!" to the next level
0:28 angry mosquito
You are funny
When you thought stepping on Legos was bad.
"Lego is not dangerous"
Lego:
The sound coming off this maschine give me the vibe of a tiny enraged but also enoyed gremlin: weHwWehhewewE!!!
1:54 sounds exactly like that one time my dog ran into an electric fence
now that is just unfortunate
Funni
Sounds a little bit like a horse
That one piece of paper at 0:35 : Gone, reduced to atoms.
Good job master builder!
What if you oiled the gears?
Hi I have done, they’ll be another soon 😀
Get scissors?
Nah.
Get legos?
Yes.
Masks may be able to stop the virus, but they can't stop a Lego Technic Saw with 14 Motors and a RPM of 4350.
😂😂
Welcome to the worlds funniest sounding table saw
Imagine having the spinning gears touch your hand, worse than stepping on the saw itself
0:45 ok that's sound LMAO 🤣😂🤣
The quiet kid when he gets a lego set:
A flywheel could help give it more kick but wouldn't change much in the feed speed, it would just make the speed more consistent. As for safety, it clearly can cut skin but a piece of paper can cut skin.
Replace the plastic saw and axles with metal counterparts, and you're golden.
The mosquito in my room:
Has this guy never used a saw he was putting things in backwards
The blade was facing backwards though
the saw sounds like a woman trying to sing opera like she did back in the 18th century bruh
I suspect it's somewhat less to do with the table construction, and more to do with the blade.
WHY DOES THE BLADE SCREAM OMG
Lol the noise is funny to me
No, just add a real blade to that. A sharp one. It will be fun! (they said)
If it can cut through a carrot it will definitely cut through ur skin
imagine if you remade this but with a high powered lego vacuum engine
That is genuinely terrifying
So I guess this is just in everybody’s recommended all of the sudden?
Yep
Yes sir
mhm
There’s so many comments within the hour!
Sorry! I Will join you all on the next random video I’m sure 😀
I suspect lego will discontinue the saw piece soon haha
😂😂
"Still don't wanna talk, eh? Bring out my Legos."
Me: Trying to sleep
The Fly in my room: 1:51
1:54 the mosquito in my room at 3 am
Lol, so true
0:46 that sound the shredder made was hilarious
when it comes to table saws sharpness of the blade is important but both rpm/speed of the blade and durability are more important factors
If it can cut a carrot, it can cut a finger
not necessarily. carrots are stiffer
Nope, fingers are significantly harder to cut through than carrots. You might get a small cut but you won’t lose the finger
it might not make sense, but softbodies are least likely to get sawed because it's flexible and stiffer objects are more brittle
@@awakr7125 not only that but bone is 5x stronger than steel so thats another thing
Pov: There's a Fly in your bedroom
I love the comedic squealy sound the saw makes!
The sound of the mask getting cut made me smile
The mosquito when I’m trying to sleep
Imagine stepping on that
I don't think I've ever actually been afraid of Legos before now...
You know shits real when people make toys into weapons
Probably have better luck cutting the wood if the blade wasn't backwards.
LOL
I think it was also spinning the other way as he was pulling it, but yeah I always seen people sawing away from the body.
I cut it the best way the blade would do it! This is a Lego blade the outer edge was so thick😀
“Haha it’s Lego how could you cut all your fingers off by Lego “
As someone who works with table saws daily, coming from the back like that was craaaaaazy!
All is well here! Not enough torque to cause any trouble 😀
To cut though harder material you need less speed but more torque
There is a fine balance I found, I tried slower and faster! More motors next time 😀
Hi creator
Hi there! 😀
If you made a custom blade that had more teeth It would slow down less.
0:45 is the funniest sound I have ever heard
“Family friendly toys” “fun for everyone”
If a thing can make noise it's likely powerful enough to do damage
i like how for the mask he doesn't put any text he just commits the crime
Nobody:
The mosquito in my room at 2am:
I get the idea that it would be relatively (emphasis on relatively) easy to make a metal version of this
does the blade connect to a pin or an axel?
i want to make a baby version of this but the only blade i have had a pin hole so it acts like a very weak clutch, so can i somehow make the clutch stronger so i can cut like a cardboard or something
Why do I have a huge urge to jam my hand into the lego saw
Stop it, get some help