Simple Hinge Jig For Your Router In Just 5 Minutes

[@timhowell1220]

Want to learn something - Then watch this guy. He is smart, efficient, and a perfectionist. He does it right, down to the knife vs pencil, and the Vix bit to put the hinge screws in dead center. He also makes a nice easy to learn video too. Great Job - Thank You

Thanks very much 🙂

[@FatNormanCoathanger]

Brilliant video.!!!
Your perfect examples and execution of these tips is the dogs bollox.

🤣🤣 I haven't heard that saying in a very long time, thanks 👍

[@briangoodwin5986]

Thanks Tommy, this video has just blown wide open the mysteries of door hanging, especially hanging a door with 3 bloody hinges lol. Well done mate

Haha thanks Brian 🤣

[@thomasgabriel4531]

Your an excellent teacher Tommy thanks very much for sharing

Thank you Thomas 😊

[@AncoraImparoPiper]

Best and clearest explanation on TH-cam. Thank you!

Thank you for watching 🙂

[@henryrossouw930]

From now on my hinges are going to perfectly like yours.Thanks for sharing.

Thank you 🙂 I'm glad you liked it

[@uncensored5104]

Best explanation to the layman that I have seen on these jigs, thank you.

Thank you very much 🙂

[@paulbrennan9193]

Very handy jig sure beats a hammer and chisel thanks Tommy

Thanks Paul yes a little bit quicker alright 👍

[@yousafali1662]

Thank you very much for passing on the knowledge. Only because gem of a pros like you we amateur DIYer's can even think about attempting something like this. God Bless....!

Thank you very much for your kind words and thanks for watching 🙂

[@johngasson4259]

I've made and used this type of jig for a while. This guy's explanation of the process in making one is really excellent and SO easy to follow. And I had no idea you could use the same jig on the face of the frame. Who would have thought. This is going to save me so much time. Thank you!!

Thanks for watching and your kind words about my video 🙂

[@coachrr]

You make things easy with your common sense approach. People must say Why didn't I think of that? all the time! Please keep making videos to make the average woodworker much better! Erin go bragh!

Thank you very much I really appreciate your support 🙂

[@giicllc8819]

You had me loving the video from your accent alone! Great job! I'm going to make one now...

Thank you 🙂

[@thomasmcglynn5353]

Hi Tommy great video very well explained . Thank you

Thanks Thomas 🙂

[@soulmist2163]

I am a beginner woodworker who got stuck on a big project and hit a dead end. Thank you for sharing your wisdom and for giving me the confidence and insights to move forward.

@@soulmist2163 thanks for watching I'm happy I gave you some inspiration 🙂

[@petermccool9396]

I had this video saved for a long time. I've had 3 doors to install since September 2023. I finally bought a table saw with a view to making this jig. Definitely a must have tool for making this jig. Today, July 25,2024, I installed my first door. Never done this before. Five minute jig my arse 😂.

Thank you I'm delighted you got around to getting your doors hung using this jig. Making a 2nd one will take less than 5 minutes 🙂

[@jamesconnolly655]

Great video Tommy very well explained and demonstrated

Thanks James 🙂

[@keggyification]

Excellent explanation Tommy, great video as always.

Thanks very much 😀

[@Jimc4007]

Nice work, like the hinge jig.

Thank you 😊

[@williammcbride4978]

Very handy jig thanks

Thanks William 🙂

[@johnmurphy3854]

Great video as usual Tommy very informative. John

Thanks John 🙂

[@thomastierney2511]

hi tommy your video was very informative like the flag i am 100 percent irish tom tierney thanks again for video .

Thanks Thomas 🙂 🇮🇪

[@samuelgardiner6504]

Thanks Tommy great video as always. I should be careful what I say because when i watched your spindle moulder video I said I'd never own one and I've just been given one and I've started restoring it. Its an elektra and It hasn't been used in over 30 years. I'm going to rewatch that video. Thanks again Tommy, cheers mate

Thanks Samuel, proof you should never say never haha good luck with your new machine and stay safe. I you need any help feel free to ask

[@Steve_Wojo]

Thanks Tommy. Great video. These kind of jigs are so useful. Thanks for sharing. I am enjoying your channel.

Thank you 🙂

[@iainrutherford184]

Cracking job, Tommy. Just refreshing my memory before I have a practice 😊

Hope it goes well for you, enjoy

[@iainrutherford184]

Likewise, my friend. I hope you're well and not working too hard 😉

@@iainrutherford184 I wish I was working let alone working too hard 🤣

[@iainrutherford184]

Oh no... me and my hoofing big mouth. Can I buy you a coffee?

@iainrutherford184 you said nothing wrong don't worry about it. I really appreciate the offer but it's not necessary

[@stevesedgwick5789]

Good stuff as always, it’s a thumbs up from me

Thanks Steve 🙂

[@denischadwick4558]

Very detailed video and very useful jig thanks Tommy

Thanks Denis 🙂

[@ht2941]

Thanks Tommy, just what I was looking for! I have been struggling trying to make a guide bush jig so this looks like the answer. I am going to try and make one tomorrow, wish me luck.

Thanks, You don't need luck it will work great for you 👍

[@ht2941]

@ Perfect! I now have single jigs for 76 and 102 mm hinges. Thanks Tommy.

[@jeffsalisbury9419]

Excellent video with great instructions. Much appreciated!

Thank you 🙂

[@daveauk6898]

Nice one Tommy. Great little time saver. 👍

Thanks Dave 🙂

[@LesBrecknell]

Thanks for the tutorial, I just need to make your table saw sled now😆

Thanks 🙂

[@patbutler2613]

Very well done Tommy.

Thanks 🙂

[@chevaliercognac8757]

Now I will make one for myself.
Thanks for professional instruction!

Thanks for watching 🙂

[@chevaliercognac8757]

Can you tell me please what is classic distance for hinges on the frame for the internal doors in England or Ireland.
Many thanks.

@@chevaliercognac8757 traditionally its 4" down from the top and 9"or 8" up from the bottom and 3rd hinge if needed centred between them.

[@scrivyscriv]

I love your sled! And thanks for a great tutorial, from the USA!

Thank you very much 🙂

[@asd67lkj]

Thanks Tommy I like the tips on getting the table saw cuts so accurate..

Thanks for watching 🙂

[@MrMaxm144]

This guy's accent is awesome, !

Thank you 😊

[@bromarvids5186]

Absolute legend mate. This is exactly what I needed. Explained everything. I haven't much experience with routers, and I couldn't quite understand what bit to use and how to use it. This was perfect and you taught me an ingenious way of making a jig, which was way simpler and more accurate than how I was going to do it. 👍😊

Thank you, I'm delighted that you found it useful 🙂

[@gerardcurran3485]

Very accurate way of working, know wood well, as he takes small portions out which stop breaking the edges 3 hinge jig is a great idea

Thank you very much 🙂

[@mikebury328]

Spot on pal no bull no crap music

Thank you 🙂

[@jarnailsingh9447]

Very nice thanks my friend. I m jarnail Singh
From uk

Hi Jarnail, thanks for your kind words and thanks for watching 🙂

[@crackatinny57]

Well done Tommy, this is so informative and very well explained and it will save me heaps of time in the long run

Thanks Michael

[@andrewriches506]

Good evening Tommy as usual a very informative video, very well explained. Great for time saving and accuracy especially the multi point jig.

Good evening Andrew and thank you very much 😊

[@oscarcanales7552]

Thank you again Mr. Tommy for an exceptional video. Very clever, very clear and very accurate jig. I will give it a try as soon as I possible can.

Thank you for watching glad you found it useful 🙂

[@dimkish1]

Excellent video, very simple and effective jig.

Thank you very much 😊

[@bobheatwole804]

As always a great video.

Thanks Bob 🙂

[@bobx2387]

Tommy, Greetings from Somerset (Where the cider apples grow). Excellent tuition and commentary. Found you by chance. Now to see what else you have done. Bob (Weston super Mare)

Hi Bob thank you very much and welcome to the channel 🙂

[@yourmasterrenovator86]

Thank you very much for your great video. It's always important to us knowing the basics of how to make a hinge jig. Cheers👍🙏

Your welcome and thanks for watching 🙂

[@Excel510]

Hi just subscribed today after watching a couple of your videos, really impressed at the no fuss detail you go to, very well explained and captivating, well done sir.

Thank you very much and welcome to the channel 🙂

[@michaelyouens6133]

I listened even more because of his accent too man good luck to you ❤️

Thank you very much 🙂

[@michaelyouens6133]

Good work man keep it up 🎄

[@jofasable]

professional tutor., thank you.

Thank you for watching 🙂

[@cygnus108]

Brilliant!! Thanks for sharing

Thanks for watching 🙂

[@playingsongs]

Best video I seen! Very well explained and shown! Thank you for your help you're legend

Thank you very much 🙂

[@michaellloyd5024]

Hi Tommy, brilliant video; crystal clear and very well presented. Thank you for taking the time to make it.

Thank you for watching 🙂

[@ozcanonal]

I was looking for a tutorial exactly like this one.
Thank you 🙏 ..!

Thank you very much for watching 🙂

[@kape9004]

Excellent video Tommy. You have given me the confidence to have a go at cutting hinge slots out with a router jig. Simple to make and simple to use, Accurate every time. What could be better? Thank you sir.

Thank you very much for watching here's to perfect fitting hinges 🙂

[@robertlevy5334]

Excellent video and a pleasure to watch. Thanks for sharing :)

Thanks Robert 🙂

[@justinjamesuk7657]

That was a fantastic video, very informative and clear.
Thanks.

Thank you very much 🙂

[@jimtheman5598]

Just found your channel Tommy excellent and well explained 👏

Thank you very much and welcome to the channel 🙂

[@paultay23]

Wow that is easier to make that i thought...thankyou Tommy

Thanks 🙂

[@cillianotoole9174]

Hi Tommy
Was wondering about plunging with a regular straight bit in a router. I was going to use one for morticing but realised that there was no cutter in the center of the bit, am I missing something or are these bits unsuitable for plunge cutting. Great video as always.
Thanks, Cillian

Hi Cillian, you are correct a regular straight cutting bit doing have a cutting in the centre so are not suitable for straight down plunge cuts like a hole the diameter of the bit however if you are creating a mortise or a slot a regular bit will work if you ramp in your cut instead of a straight down plunge. I hope this helps.

[@cillianotoole9174]

@ Thanks very much for your reply, it absolutely helps.

[@whomadethatsaltysoup]

Very interesting. Never thought to use the router in that orientation. Thanks, or is it Tanks for sharing.😃

Thank you very much 🙂

[@v-dub1317]

Nice instruction and great jig! Thank you!

Thank you very much and thanks for watching 🙂

[@jarnailsingh9447]

Very nice thanks.

Thanks for watching 🙂

[@vfswan54]

Your one clever cookie, excellent tutorial 👏👏👏

Thank you very much 🙂

[@Dazza19746]

Great Tommy, used very similar setups over the years.
It would be worth mentioning that if you use this exact set up ( which is great) you need to be mindful to add a spacer on the frame equal to the clearance you want on the door ( 2.2-3 mm depending where it’s going👍🏻)
With the big triple or quad obviously that would only be at the top 😜

I will be covering that in an upcoming video when I am actually fitting and hanging some cabinet doors 👍

[@michaelspraggon2883]

Can you explain what you mean old school?

[@Dazza19746]

@@michaelspraggon2883 sure.
When you fit a door, any door, a perimeter gap is required ( we called it ‘clearance’ in Scotland). Usually 2-3 mm.
If you do not allow for this when using this technique, the top of you door will be scraping the top of the frame if it closes at all, and that’s BEFORE any finish is applied making the situation ’worser’ 😜
If that’s not crystal clear come back to me and I’ll try and explain further 👍🏻

[@scottydo2103]

Enjoyed your video. Cheers, Scotty

Thank you 🙂

[@hi-tech55]

Great video Tommy. Gave me a few ideas.

Thanks Jerry, I'm glad you found it useful 🙂

[@andrewwhitehead7252]

Thanks Tommy this was an absolute cracking video so well explained and you made it so simple it gives me some confidence to try this myself cheers 👍🏻

Your welcome 🙂

[@richiecapuccino9853]

As others have written excellent easy to follow. 1 question how to determine how far in a hinge is set for. Not depth of the cut but how close the barrel should be to the door and jamb ?

Thank you very much 🙂. The set of the hinge is always to the knuckle of the hinge as you can see when I marked for the cut out I positioned the hinge upside down using the knuckle to position the depth. Hope this helps

[@richiecapuccino9853]

It does. Thank you. But I am replacing a few doors in existing jambs and that is not what i see. I think I have to match what the old door has, since it seems to work properly.

@richiecapuccino9853 the jamb side may be different if the rebate in the jamb is bigger than the thickness of the door. Your best option when matching an existing cutout is to measure the jamb from the rebate/stop to the cutout of the existing hinge and replicate that onto the door

[@victormarmie]

Very usefull!!! Thanks for your time and skill share

Thank you 🙂

[@y002cjw]

You make it look so simple.👍and a follow.
I'm currently installing 100mm hinges on doors and frames where there was previously 85mm. Doors weren't a problem as they were easy to work with, plus I borrowed a jig and router off a friend.
Any tips for doing the hinges on the frame with the doorstop still in place? I found the first 2 a nightmare and I have 4 more to do and they're currently on the long finger.

Hi Charlie, just removed the 90° piece of wood from the template and just use as a flat template it can then be used in the frame without removing stops or architrave

[@als1023]

@ Or run a rabbit out of that piece on the table saw, to accomodate the doorstop. If the door trim is still in place, you will have to cut the depth of the jig locator piece down or remove as noted .

[@nore8141]

Great tutorial and jig thanks 🙏

Thank you for watching 🙂

[@davidupton3186]

Very, very helpful. Thank you for posting.

Your welcome thanks for watching 🙂

[@theofarmmanager267]

In my 50 plus years of woodworking, I’ve made hundreds of hinge jigs. However, the whole thing was revolutionised when routers became affordable (I can remember when routers cost thousands and I earned £20 a week). I have refined how I make mine - firstly I cut a length of the MDF (or whatever) the length of the hinge (say 100mm); accuracy here is crucial which is why l like my method in that you can fettle the piece of MDF to be exactly that 100mm. Then take 2 further cuts of the MDF and join then at right angle to the 100mm piece to mimic the width of the ears of hinge. I join these with dominos or pocket screws. That’s where my method joins this method. Again, the advantages I’ve gained is that certainty of the length of the hinge (100mm), the width of the hinge and the dead right angle between the 3 pieces.
Once the 4th piece is attached (which I cut less than 150mm long so that I can still get that 6”, 9” and centre spacing on 3 hinges) I use a couple of quick clamps to attach the jig to the door or the door jamb. If I am doing this to a door jamb already with the door stops on, I prise off the door stops to ensure my jig sits properly.
I often end up having to use a router bit with a longer cut to ensure my router bit is sufficiently inside the router collet.
I hope I’ve been able to explain my method well enough for you to understand it’s construction. If I’m careful, the jig lasts and lasts but usually I make a new jig whenever I’m using different makes of hinges just to get that real accuracy.

Thanks for sharing your method 🙂

[@iantownsend4821]

Tanks a million. Great explanation. Loved the video

Thanks very much, delighted you enjoyed it 🙂

[@patrickmurphy115]

Just brilliant, great detail 🤩

Thank you very much 🙂

[@frankfrancia5541]

Great job! Did you do a video on how to build that beautiful table saw sled?

Thank you, yes I certainly do: th-cam.com/video/1DsXV2vZ1oU/w-d-xo.html

[@Ifthy71]

How soon can you use baking soda after planting vegetables? TIA

[@andrew-zr1pf]

So I take it you still have to chisel a recess in the door jamb?

No this jig will also work in the door jamb

[@nigelboucher2014]

Great video Tommy. Really liked the cross cut sled. Any chance you can do a video on how to make it

Hi Nigel I have a video of making it: th-cam.com/video/1DsXV2vZ1oU/w-d-xo.html

[@nigelboucher2014]

Thanks 🙏

[@ed6837]

Nice video good idea very useful. Thank you!!

Thank you very much, delighted you found it helpful 🙂

[@nigelseymour5159]

Pure genius!

Thank you very much 🙂 and thanks for watching

[@RenevanBatenburg]

Just perfect, thanks

Thanks for watching 🙂

[@andrewdolinskiatcarpathian]

Excellent tutorial. Very useful indeed. Many thanks. 👏👏👍😀

Thank you very much 🙂

[@yandamighty01]

Love the accent good video buddy 👍

Thank you 🙂

[@gideonmajor9230]

I would have to trench it on the chop saw ! Any advice ?

The chop saw should have a depth stop to set the depth of the trench and then just use some offcuts as stops. It is basically the same process

[@gideonmajor9230]

Thanks ! I’m getting nagged about getting our upstairs toilet door back on ! I will give it a go tomorrow ! I will let you know !

@@gideonmajor9230 best of luck but I'm sure you will have no problems 🙂

[@tonyatkinson5856]

Router 9:46

??

[@samoanSAIYAN]

Bloody marvellous

Thank you very much 🙂

[@adnanhanif3016]

Hello mate, all good but I don’t have the table saw like you so how should it the groove out’?

Hi, you could cut it out with a bandsaw or jigsaw etc just take your time to get the cuts as straight as possible which will give the best final results

[@adnanhanif3016]

@ I don’t have either 😂 I’ve got a chop saw, could I do it with that. I’m a total newbie Buddy

@@adnanhanif3016 yes you could definitely do it with a chop saw just set the depth stop 👍

[@no_handle_required]

best narration voice ever!

Thank you 😊

[@martinmcintyre9263]

Bit confused why when cutting out the section on the table saw you set the stop but you didn't move the jog to that stop. (probably by the width of the blade. Can you please explain?. The time on video was around 6:06

Hi Martin, there is a screw in the stop that allows for the width of the blade so the setup is to the stop block excluding the screw so when the job gets to the screw the blade width has been subtracted. If you watch my video on half-lap joints I explain the use of the screw a little better. Hope this helps you

[@ivanwalker3391]

Spot on.
Keep 'er lit Bro!

Thank you 🙂

[@GreatWaterCircus]

Brilliant... thank you

Thanks for watching 🙂

[@alexdoherty4011]

lovely thanks

[@johnbrooks1422]

Good Idea Like It Great Video

Thank you very much 🙂

[@fluorosco]

Brilliant 👍

Thank you 😊

[@datapowertoolsltd]

What a brilliant video 📹👌

Thanks very much 🙂

[@allankennedy3931]

great allan

Thanks very much 🙂

[@kevinchamberlain7928]

The Irish have always been highly skilled at at least 3 of the following 4: Fighting, swearing, smoking, drinking. Looks like I'm gonna have to add-in hinge cutting, too?

Haha I'm very good at all 4 of those too 🤣🤣

[@kevinchamberlain7928]

@ No doubt! My mum was a Hogan, Irish descent, and I'm afraid I have all the excellent qualities myself! Great tutorial btw! 🤩

[@ottofumbler7267]

Most DIYers won't have a table saw. Can you use the router or a circular saw to fashion the jig?

The safest alternatives to a table saw for diyers would be a jigsaw or good old coping saw. Using a router or circular saw wouldn't be really suitable for beginners

[@ottofumbler7267]

@ Thanks. I've tried a jigsaw for other projects, but blade vibrations meant the edge wasn't very clean. I was using a softwood at the time, but maybe MDF would work better as it doesn't have a grain. I'll give it a bash. Cheers!

[@ottofumbler7267]

Figured it out. Instead of the first piece fashioned from a single piece of MDF, on any power-saw simply cut 1 long piece for the back plus 2 matching shorter blocks for the sides, then screw them together leaving a gap the width as the hinge.
This makes a nice square & true first piece in your tutorial, then just follow the rest of the steps to complete the jig construction.
Where there's a will, there's a way.

[@paulgreen8222]

Brilliant

Thank you very much 🙂