Meisterschaft FTW! 🏁 That open valve cold start was 🔥🔥🔥! OAN, I can really appreciate the time you took to run the vacuum lines properly! Looks very clean! ✊🏿
I did not unplug the o2 sensor before unscrewing it. I let it twist and make sure to twist it about the same amount when installing it onto the new midpipe.
My way was complicated, I recommend going to the cigarette lighter port so it will only work with the car on and won't drain your system. I believe I show where I mounted the box in a different video
To be honest, I don't remember where I got them from at this point. But they don't really work too well for the pinch weld. The pinch weld just cuts the part it rest on in half
My personal opinion. This exhaust was insanely loud open or closed valved when I first installed it. Now that it has broken in with some miles on it, or my ears have grown accustomed to it, it' pretty quiet with the valves closed and a beast when its open but no drone on freeway in my opinion
Is that socket size is 7/8 for O2 sensor? I went to the muffler shop and they don’t have that specific size. That’s why i ending up going home sad because they didn’t install my exhaust.
That's disappointing a muffler shop didn't have the correct o2 sensor removal tool. It's a standard Toyota size. Here's example of one: ARES 70039-3/8-Inch Drive by 7/8-Inch (22mm) Offset Oxygen Sensor Socket amzn.to/3VTEflm
He has one tool to remove the O2 sensor but he wants to cut the hitshiled for O2 sensor and told him not to do it like that. Thankyou so much for the link! Help me a lot!
Meisterschaft FTW! 🏁
That open valve cold start was 🔥🔥🔥!
OAN, I can really appreciate the time you took to run the vacuum lines properly! Looks very clean! ✊🏿
Appreciate the love
Sounds nice , good luck with the smog check though :D
don't live in a commie state lmao
that thing sounds so mean... thanks for the video
it sure does sound mean!
Nice work! Did you up having to cut or is it all bolt on?
It was all Bolt on. No cutting required.
Rodney what is the metal cylinder around the o2 sensor? Is it to prevent people working on their cars?
I think it's more to protect the o2 sensor from road debris
@@specONE Rodney where did you get your Lemus parts from? Was it directly from Lemus?
Do you mean LEMS? LEMS does not sell directly to US customers, you have to use a middle man and buy from an authorized dealer on behalf of you.
@@specONE where did you go for the LEMs in the US?
Did you unplug the O2 sensor before unscrewing it? I tried to, but the wires start twisting and I'm afraid of breaking them
I did not unplug the o2 sensor before unscrewing it. I let it twist and make sure to twist it about the same amount when installing it onto the new midpipe.
When you purchased your exhaust system did it come with the mid-pipe or was that sold additional? Also any dash codes pop up?
Purchased separately as an addition. No dash code if o2 sensor is installed and gaskets don't leak
Hi Rodney. I'm considering getting this exhaust, but I don't want any drone. Is that an issue you have experienced?
no drone to me even with valves open on the freeway
@@specONE nice
Where did you mount the black box and get power from? Thanks
My way was complicated, I recommend going to the cigarette lighter port so it will only work with the car on and won't drain your system. I believe I show where I mounted the box in a different video
Any worries with carb compliance? Only reason is I've been looking at this exhaust and I'm in CA lol any input is appreciated!
🫣
What adapters do you have for the jack stands thays on the pinch weld?
To be honest, I don't remember where I got them from at this point. But they don't really work too well for the pinch weld. The pinch weld just cuts the part it rest on in half
Any drone?
My personal opinion. This exhaust was insanely loud open or closed valved when I first installed it. Now that it has broken in with some miles on it, or my ears have grown accustomed to it, it' pretty quiet with the valves closed and a beast when its open but no drone on freeway in my opinion
Is that socket size is 7/8 for O2 sensor? I went to the muffler shop and they don’t have that specific size. That’s why i ending up going home sad because they didn’t install my exhaust.
And do you have any link for alittle bit cheap socket like you can recommend? Thankyou
That's disappointing a muffler shop didn't have the correct o2 sensor removal tool. It's a standard Toyota size.
Here's example of one:
ARES 70039-3/8-Inch Drive by 7/8-Inch (22mm) Offset Oxygen Sensor Socket amzn.to/3VTEflm
He has one tool to remove the O2 sensor but he wants to cut the hitshiled for O2 sensor and told him not to do it like that.
Thankyou so much for the link! Help me a lot!
@@specONEthis socket falls short. Doesn’t reach. DO NOT BUY.
If U it's a Calif O2 Sensor,Diff.from Stk.May have to get it f from Dealer Parts.I had a 2001Tundra Calif.Sensor Truck,Bitch to Remove.
Any check engine light?
No check engine lights!
I’ve been thinking of getting the gthaus for my is500
How is it
It sounds amazing
Did you get it tuned ??
No tune, just stock ECU mapping
It sound like a ford gt
Can you sell me your stock exhaust?
Sorry I have no plans of selling the stock muffler system.
How is It with cops ? Being in gaylafornia ?
Did you use the same gaskets and the hardware from the stock one or do they come with the gthouse order?
I reused gaskets. GThaus didn't provide any