I used to watch 3D every single day for years. Feel like it’s been forever since I’ve even heard of him. Kinda of a shame. Times come and go. Hope all goes well bud.
Dalton, what happened to my favorite TH-cam Channel, where you had lots of great projects and builds. Original 3D MACHINES content that inspired me and made me wait for it anxiously????
Same. I remember getting so excited when he uploaded years ago when i was younger. Honestly i forgot about him until i was looking up a tutorial and his vid popped up
Just think he could’ve had of a million subscribers if you didn’t change the way he does his videos. Its really disappointing to what this channel has come to. Made videos in the past how he was going to upload more videos. Than only to go MIA for a long time.
RIP 3d productions I'm out it was good while it lasted a few years ago I guess......the fact this channel had so much potential and you blew it all is pretty sad......
Dear 3dmachines, I grew up on your channel, like no bullshit, my xr100 and tri moto 125 litterly rocked my life in high-school because of your vids. Those bikes are in the past and so is my last trip too the trails. Thanks for the childhood Dalton. Means a bunch. -💯
HIs old content was wayyyyy better that’s why I subscribed I know he wants to do is own thing but with the type of business he is in he really can’t because he needs the support of his followers and the best thing he can do is listen to them. Everyone comes on TH-cam to to watch creators, and CREATORS make up there own ideas not copy off of someone else’s, and if you were to copy off someone else at least do it bigger and better!
While this has been done by WhislinDiesl and it’s kind of a direct copy I still appreciate it because it’s much more similar to your old content which was really great I don’t know when this shit all went astray but it did
You inspire me i have been watching your channel since the early days i hope one day i can make my channel half as good as channels like yours brandons and many others keep up the good work
Your ATV bogging might be due to not enough airflow restriction. I snorkeled my 400 Suzuki Eiger and while I was running it with open airflow started up fine but it bogged down when I gave it throttle I restricted the airflow a bit and it ran fine no bogging
This channel has definetly died and it sucks but he should have stuck with it he's got over 600k subs and could be way more if he stuck with it 600k subs and only 30k views per video ouch
If you have tires that are bigger than stock, I would recommend buying some shims on eBay. It’s cheap and give you some low end power back for the king quad.
I miss the videos when he used to race his buddy’s through the woods on the Honda or Kawasaki. And punching a guy who stole his bike in the helmet and say ow the hurt with a busted Knuckle. That was funny to me cause no shit it hurt it’s a helmet
I’m guessing gayzuki uses a tip over sensor that reduces power as you bring the front wheels up, which shouldn’t be right because if you climb a hill it will does.
if u wanna do a wheelie on that u gotta put it in low and hold the front break while giving it gas without it moving then let it go and pull i used to have one
Cut Stuff Cheap amzn.to/2LmK38n
Get Your shop on
Where is the duramax?
Home made lawn aerator
Time for a new cameraman, The one you have now doesn’t believe in full sends🤦🏻♂️
Please don't compare Braydon Price with you. Braydon is successful, your channel is long dead
Guy copies whisilin diesel
I used to watch 3D every single day for years. Feel like it’s been forever since I’ve even heard of him. Kinda of a shame. Times come and go. Hope all goes well bud.
I’m trying to get to 50 subscribers by the end of the year.
Man this channel is dead. I remember the golden era 2015-2017
You gotta get the boys back together and just go rip like the old days.
Dalton, what happened to my favorite TH-cam Channel, where you had lots of great projects and builds. Original 3D MACHINES content that inspired me and made me wait for it anxiously????
I think the time has come to say goodbye . Used to look forward to your videos , that time is in the past . Good luck in the future
I’m trying to get to 50 subscribers by the end of the year?
Yeah I agree I am not hating I am just accepting reality.
@@aydenmx8020 nice channel
@@zachbarnett3507 thanks
RIP 3DMachines 😥😥😥
Aaaaaand he disappeared again...this used to be one of my favorite channels to watch.
Same. I remember getting so excited when he uploaded years ago when i was younger. Honestly i forgot about him until i was looking up a tutorial and his vid popped up
Glad to see someone else is abusing it and not me anymore 😂 I might’ve took a huge loss on it but it’s fun to watch someone else enjoy it
was that your quad?
@@andrewb232 yes it was before he bought it.
was it always slow or is something wrong with it
@@andrewb232 it used to have a lot of power. Like after he fixed it that was normal power but in this video it looks like it’s missing a lot of powee
@@RandomVideosInFlorida well thats turning round wheels lol
Looks like somebody’s getting ideas from whistling diesel
mixed with brayden lmaooo
Nah 3dmachines has been doing this stuff since 2014 when whistling diesel was still in diapers and learning to walk
@@jtb9797 ha nah lol
Just think he could’ve had of a million subscribers if you didn’t change the way he does his videos. Its really disappointing to what this channel has come to. Made videos in the past how he was going to upload more videos. Than only to go MIA for a long time.
Imagine he found a electric wire buried in the ground 😄
Nothing would happen
@@nathanhearld474 he means that he will cut it
Would be funny if he cut his internet lol.
I guess he doesn't want it anymore guys. Don't be mad. He just doesn't want it. Obviously.
Anyone else miss the days where he had the kx and the Honda and lived in New York cause I sure do but still love the content it’s froggy fresh 👌🏻
RIP 3d productions I'm out it was good while it lasted a few years ago I guess......the fact this channel had so much potential and you blew it all is pretty sad......
dude this channel died a year ago lol
@@skimask5049 longer then that
Dear 3dmachines, I grew up on your channel, like no bullshit, my xr100 and tri moto 125 litterly rocked my life in high-school because of your vids. Those bikes are in the past and so is my last trip too the trails. Thanks for the childhood Dalton. Means a bunch. -💯
I miss when your content was just ripping and fixing stuff with the boys in NY, now it’s just copying other people’s videos and not entertaining.
I agree
I agree big time
Couldn’t have said it any better he’s more worried about other people content when his old stuff was great then he goes ghost randomly
Like an off brand Whistlindiesel....
HIs old content was wayyyyy better that’s why I subscribed I know he wants to do is own thing but with the type of business he is in he really can’t because he needs the support of his followers and the best thing he can do is listen to them. Everyone comes on TH-cam to to watch creators, and CREATORS make up there own ideas not copy off of someone else’s, and if you were to copy off someone else at least do it bigger and better!
One video every two months? It was fun while it lasted, see ya☹️
I swear y’all have a problem with everything this man does. Things changed over time let the man be.
Beetle juice go home your drunk lol
What happens when you smoke crack. Its a downward spiral...
@@setrakusra6802 look at u just spreading bs like a weirdo get a life bub 😂😂
Didn’t Whistlin diesel already do this
Not on a fourwheeler
yes and thats how bad this guy has got. its hard to believe that this was once a decent channel.
Now it sucks
@@bryanroupe8646 ?
3dmachines smashed his truck with an axe in 2014 so does that mean whistling diesel copy 3dmachines
Mini whistlin diesel!
Ay haha
haha nothing close
More like the generic off brand dollar store version nobody wants to watch.
If whilst en Diesel was cool
Way to copy whistlin diesel lol
Hes trying a little to hard
he has been
While this has been done by WhislinDiesl and it’s kind of a direct copy I still appreciate it because it’s much more similar to your old content which was really great I don’t know when this shit all went astray but it did
I wonder if you comment on whistling diesel video when he smashes his truck saying 3dmachines did that so you must be copying him
I’m just waiting for the og crew to regroup at the old trails with there newer machines well if there all still buddies
Move on already
It's sad to see this channel is in the dumpster.
What happened to you, Dalton?
You inspire me i have been watching your channel since the early days i hope one day i can make my channel half as good as channels like yours brandons and many others keep up the good work
He’s gone crazy
The camera man is so annoying 😂
Who else was yelling at there screen for Kole to shut up when he took her on the road! 🤔
Now that’s whatcha call plowin’ a field!
Whistlindiesel did it right 😂
Your ATV bogging might be due to not enough airflow restriction. I snorkeled my 400 Suzuki Eiger and while I was running it with open airflow started up fine but it bogged down when I gave it throttle I restricted the airflow a bit and it ran fine no bogging
I’m trying to get to 50 subscribers by the end of the year.
I have not watch this guy in 3 or 4 yrs
I got a question can u put a Suzuki king quad 750 engine in a Suzuki king quad 450
This channel has definetly died and it sucks but he should have stuck with it he's got over 600k subs and could be way more if he stuck with it 600k subs and only 30k views per video ouch
Taking notes from Orion I see
I did Not see this coming....LOL.
The new way to rototill your garden
Braydon price is typing
I cant believe that worked that was awesome
At last.. Yes sir your land is ready for planting..
miss the old 3D......
Congratulations you invented the roto-tiller lmaooo
Dude I seriously miss your videos
No veiws but 9 comments youtube go home your drunk buddy
Did u sell the Duramax? I think I missed sum
Are you coming back the ny over winter
If you have tires that are bigger than stock, I would recommend buying some shims on eBay. It’s cheap and give you some low end power back for the king quad.
You aren't Whistling Diesel
Its gonna suck even more leaving it outside lol @3dmachines
Is it just me or do you miss his snowmobileing videos.
WHAT HAPPENED TO 3D MACHINES???
Bro, the king Quad needs a valve job. When it starts popping out the intake like that. Its telling you something.
Who all is here wishing he still made videos
He said smooth like whisky lol 😅 nice 1. Funny vid. The intro was a good 1 too.
I miss the videos when he used to race his buddy’s through the woods on the Honda or Kawasaki. And punching a guy who stole his bike in the helmet and say ow the hurt with a busted Knuckle. That was funny to me cause no shit it hurt it’s a helmet
Getting famous off comments day 200, so I can live the dream, live everyday like it’s your last day🤙🤙
Keep bringing the videos
I was laughing to hard
Hopefully you see this I had a bike that would die out about half throttle like that I replace the carb and that fixed every single problem
Really hoping for a post soon.....
lol, the steel 'wheels' on the road makes a cringey noise like nails on a chalk board. Poor quad, it's trying!
I’m guessing gayzuki uses a tip over sensor that reduces power as you bring the front wheels up, which shouldn’t be right because if you climb a hill it will does.
I’m just here for a house update that’s all
Were you at
Belt drive four wheelers are cold blooded
And he's gone again
Now there’s the Dalton I remember! Lol. Poor Cole. He’s literally begging you not to go into the street and you send it anyway!
The ford escape is more like a chick repellent
Been watching Whistlin diesel... to much
Does he not have the dmax anymore?!?!
To be like Braydon you gotta get a can am renegade
Wait Dalton you're still alive? Jk, missed you my dude, hope all is well.
Full send!!
7:06 A suzuki doesnt know what idle is. Currently living with that issue on mine aswell....
yes fun, easy and entertaining
if u wanna do a wheelie on that u gotta put it in low and hold the front break while giving it gas without it moving then let it go and pull i used to have one
let the break go while it’s almost about to move
What ever happened to Jake the Snake?
He seems under the influence
Got quite a ways to go to get up with price. Also cars and cameras got the bar set pretty high themselves.
Cool video 😅😅
Daltons out here aerating his driveway with those honkers lol love it
ya need some upside down catenary curves
Who needs a nice garden/yard anyways
Bruh I own a king quad and I'm saying yours is a total lemon
How much u want for the wheels
How long until the durmax is back
for the river stock wheels on it you see the key was extra wheels and tires you rent all that stick with that wheel that silent four wheeler
It sounds like it’s choking itself out somehow
You should go ride with braydon
We need more videos like this 😂😂
First 00:30 says hes not going to uploading anymore...
Shame, the house stuff was looking interesting
Once you completely totaled this machine I’ll buy the snorkel head you know the only good looking part on this machine
Daltons ground tilling service is open for business.
I’m trying to get to 50 subscribers by the end of the year.
Ayyyy 3d
Check your fuel pump for the load issue
Pull sensor on back of rad will run fan full time