Pretty nice and complete as a begginer tutorial! I would like to point out a few simple settings that will easily improve the result even more, if anyone wants to take it a bit further. - On the domain, the "fractional obstacles" checkbox can improve the flow against diagonal obstacles and help with the water getting stuck in a stair pattern on the slope. - In the "mesh" section of the domain, you can set the "upres factor" to 3 and get a much more detailed mesh for the same simulation. - Still in the mesh section, you can check "use speed vectors". This will allow the fluid to have motion blur at render, which will make it a lot more realistic. The cache format needs to be set to "uni cache" for this to work.
Usually after I finish watching a 1hr tutorial video, I feel scared to start sth new, but when I watch this guy's videos, I feel like I already know what to do and how I wanna do it. That's how I learnt how to animate anything using his animation beginner tutorial. That right there is a rare gift.
This was great. Thanks. I think another really important tip for beginners is that fluid simulations work much better at large scale - even if you have a great graphics card. So if you are modeling something like a faucet, don't use real world scale or you will end up needing a resolution of 200-300+, it will take forever to bake, and you will still struggle with effectors not working properly (e.g. fluid through the mesh). If you scale everything up 5-10x you can work with lower resolution and get much better results. I've learned this the hard way.
Wow. As a beginner, I thought I had found so many good tutorials about Fluid. Then back to one of my favorite channels, I realized again why you have “King” in your name. It's great how precise and much more detailed you explain than others. Thanks for all your work!
Great tutorial, I just found 1 confusing thing. When the water goes thru the effector, you say that the solution is to increase Resolution Divisions. What helped in my case (I was doing my own scene, very large objects and a looot of water ;) but I wanted to learn about the fluids in Blender from your tut, which was great), was the Surface Thickness in the Effector settings. I had to set it to 0,5 and it worked even with very low resolution divisions. Thanks anyway, great tutorial!
If you want to set up a very small fluid source, set Flow as mesh plane with IsPlanar checked and resize it as much as possible, the effect will now depend only on ResolutionDivisions. To reduce the fluid even more and give it more character, add to your FluidDomain a Displace Modifier with Strength eg -0.02 and after it a Subdivision Modifier to remove the resulting artifacts. Remember that this sometimes breaks brush painting with Dynamic Paint. Also, I had a case where I was using two separate fluid domains in one place and wanted to use them as a brush dynamic paint, but either one or the other didn't work, adding them to one collection and using the Brush Collection in dynamic paint options helped. Sometimes it happens that when we attach Flow mesh to the armature, the fluid simulation will not work, you need to bake the Flow mesh movement and detach it from the armature.
Maybe this will help some people, this is what worked for me The icosphere isn't making water -> delete the icosphere and remake one that hasn't been scaled down too small The water keeps clipping through the slope completely and going down in a straight line -> Make the slope and the cube two different objects The water keeps clipping through the object even though I've raised the resolution to 100 -> Size everything up a lot except the icosphere.
Man.. they way you explain every common little step like we're kindergarteners on every video, despite some of them being pretty advanced.. I really appreciate it😆
I am a newbee with blender, I have learned most of your tutorial for material and it really helped me a lot. Thank you so much for everything you have done. 🥰🥰
The force is strong with this one :) Can't wait to toy around with all this and so much more and especially integrate it into a complex simulation for most of my inventions (from al things architectural and urban + interior design, vehicles, clothing and footwear and practically all sorts of objects) And also, I'm quite curious what the 5000 series will be capable of :) Especially in your hands :) may the FORCE BE WITH YOU !
Highly Recommended. Thanks for the "deep dive" into fluid sim. This has helped me tremendously and would steer anyone who wants to learn blender here first. 🤘
I love your tutorials! They are very thourough and teach not only how to make the simulation but a bit more about why you're choosing certain options. Thank you for all the hard work you put in!
@@RyanKingArt quick question, do you know how to make the end of the water simulation taper off rather than fall as a glob at the end? I hope that makes sense. ☺️
Stopped by because I couldn't figure out why my fluid sim wasn't simming (it turned out my outflow object was too small), stayed around to the end because it was so well presented.
First off I've been using blender for about 7 years giver take. I've created muscle memory and then I didn't use the program for a long time and then created muscle memory and then didn't use it for a long time. I've watched hundreds upon hundreds of tutorials online from various people. Your tutorials by far are extremely exemplary! I watched a lot of Ducky video Tutorials. By far you are the best at explaining. U take the time to teach people and that's amazing you don't skip over anything. I am just so impressed with your tutorials and your ability to create a immersive environment in which to learn them. I just have a question. I did this tutorial and when I added motion blur it made it look like it was gaseous. I've spent hundreds of hours watching your videos and trying to emulate what you do. You are a freaking genius. Thank you for all that you do and I wish that I could support your page, all your pages I should say. I'm just broke as a joke. You are a huge inspiration!! One last thing, if you don't mind me saying is that, I use Imperial. I don't know metric. It's possible that my viewing instructions might be different because I don't use metric settings. Your input would be greatly appreciated. Ty
Big Thanks, Ryan!!! You and your brother are Amazing. I've been working on a fluid sim lately, and this is perfect. Infinite Thanks and Appreciation for you. God Bless
It took me a while to understand why I wasn't seeing my simulation preview in the viewport. The reason is because, when set to "Replay", it caches the sim, and if you make any changes those changes won't update, because the cache is still there. To reset the cache, you can change the resolution-then back to default again. For example: You played the sim at 32 rez, so reset set it to 34, then back to 32, and when you press Play you'll see it updated.
+Some tips for those users who doesn't have 128 cores threadrippers... •domain size *must be* as smaller as possible because mantaflow optimizations is somewhere near titanic's current position and it would calculate nothing most of the time.This small thing could save plenty of hours of baking time. Also smaller sized domain could have less resolution than poorly sized one with bigger resolution with the same voxel size which also means less calculation time. •always use particle size 1.05 •Diffusion 1000000x > viscosity •Adding Smooth modifier on domain for render with facfor=1 and ~5repeats *drastically* increase quality of lowresolution mesh •you can never touch "mesh" settings on domain. completely gives nothing except wasting time to play with them
So, there must be a problem... When I lift my resolution to 100 the fluid does NOT follow the effector track in order to flow directly into the extruded cube. Can you help me with that?
This is the best tutorial I've found so far, but I cannot figure out how to get it to work. I did all the same steps and nothing ever happens. Even after making everything absolutely massive and trying to change the resolution and playing with all of the other settings, nothing ever happens.
Fluid simulations have never ever worked for me in my 7 years of blender, I have done everything you have done but nothing is coming out of my thing even after rescaling
Not to be off topic, but can you do a video on "Procedural Water Drops", for use on a soda pop can or a glass cup? Your teaching skills are top notch, the best on TH-cam.
Hey man thanks so much, this and the cloth sim tutorial have been extremely helpful, and your teaching style is excellent. Perfect amount of repetition / reiteration in certain areas. Just one question though, is there any particular reason you use the denoiser in the compositor as opposed to using the one in the render settings?
I've wondered about the denoiser as well. I remember a couple years ago some TH-camr suggesting using the denoiser in the compositer (with "Denoising Data" checked on, and Denoising Normal and Denoising Albedo plugged into the Denoise node in the compositor) so that's just how I've done it without really knowing why. But now in 2024, is there a "best" way to do it? Is some version faster / is some version higher quality but slower?
How did you learn blender? What courses did you complete for that? Or did you learn blender software only through youtube channels? If you can please reply for this
I am wondering why you rendered out the animation as individual images rather than a video format. Does it save time and or storage? Nice video thank you!
Awesome tutorial! This is a great place to begin, well-explained and a good pace. I have a question to take it further though: if you want to the fluid to not be uniform (lava flow is my ultimate goal, but same would apply to dirty water or mixed color paint), can you MIX two materials together in the fluid simulation?
I have had no luck with any of this.. I can get everything to work but I need a larger domain, when I do that I no longer get water from the flow its like having a large domain screws it all up no mater what I do, it just borks. :/
When I increase the fluid simulation resolution the fluid falls for a very short amount of time and then stops. The fps shows 24 so I don't think the simulation itself is frozen
Amazing tutorial as always. I'm having difficulty removing the Domain box for rendering. I've clicked Mesh and also looked at Viewport but no option for NONE. I'm using 3.4.1. Any suggestions?! Thnx
물 시뮬레이터를 어느 정도 배우고 색깔을 조절 하는 방법도 노드 배우는 방법도 여기서도 배우지만 강좌의 내용이 비슷하니 내용의 이해력이 좋습니다. 저는 범고래, 돌고래 애니메이션을 만들 준비 하고 있습니다. 이제는 파도가 부딫히는 원리를 배우는 단계입니다. 파도에대한 애니메이션 강좌도 있으시다면 부탁드립니다. ^*^
Thanks! So, hypothetically, we have a scene with a great deal of steam coming from vents, is it better to bake the steam, than add it after creating a scene for rendering purposes? Plus, what should we think about in regard to scale when it comes to using simulations for a set piece that might be extraordinarily complex?
Thanks for your support! I would recommend baking simulations at the end of a scene creation, because simulations can slow down the viewport, and if you change something in the scene, you might need to re-bake it. And yes, modeling to scale can be helpful, to make the simulation look more realistic and to have a more realistic simulation speed.
@@RyanKingArt It was good times! There is no shortage of tuts on fluid simulators, but you avoid the fluff and unnecessary, if not infuriating, sidenotes to amuse, and you have a pristine attention to detail. It is going to be time for an RTX video card in my future in order to do the things that I want to do that will be compatible with Cycles. Going forward, I would love to see a tutorial on retopology for characters in order to hit up UV mapping and procedural textures on sculptures/figures with intentions to animate while reducing rendering times. Thanks, Ryan.
Hi Ryan, thank you for this, however after adding all the fluid types and settings and even increasing the size of the iscosphere, I`m not getting the fluid animation. I have even baked it but still nothing, what could I be missing?
![วันเกิดเธอ (TO YOU) - PHUWIN [ OFFICIAL MV ]](http://i.ytimg.com/vi/_ROx1Bj3T0Y/mqdefault.jpg)
Pretty nice and complete as a begginer tutorial!
I would like to point out a few simple settings that will easily improve the result even more, if anyone wants to take it a bit further.
- On the domain, the "fractional obstacles" checkbox can improve the flow against diagonal obstacles and help with the water getting stuck in a stair pattern on the slope.
- In the "mesh" section of the domain, you can set the "upres factor" to 3 and get a much more detailed mesh for the same simulation.
- Still in the mesh section, you can check "use speed vectors". This will allow the fluid to have motion blur at render, which will make it a lot more realistic. The cache format needs to be set to "uni cache" for this to work.
Usually after I finish watching a 1hr tutorial video, I feel scared to start sth new, but when I watch this guy's videos, I feel like I already know what to do and how I wanna do it. That's how I learnt how to animate anything using his animation beginner tutorial. That right there is a rare gift.
glad my videos help!
Just want to say THANK YOU for all effort you put into this videos. they are extremely educational
Glad you like them! thank you for watching!
This was great. Thanks. I think another really important tip for beginners is that fluid simulations work much better at large scale - even if you have a great graphics card. So if you are modeling something like a faucet, don't use real world scale or you will end up needing a resolution of 200-300+, it will take forever to bake, and you will still struggle with effectors not working properly (e.g. fluid through the mesh). If you scale everything up 5-10x you can work with lower resolution and get much better results. I've learned this the hard way.
Clever trick …i see how that would work 😮
Wow. As a beginner, I thought I had found so many good tutorials about Fluid. Then back to one of my favorite channels, I realized again why you have “King” in your name. It's great how precise and much more detailed you explain than others. Thanks for all your work!
thanks. but king is just my last name
Great tutorial, I just found 1 confusing thing. When the water goes thru the effector, you say that the solution is to increase Resolution Divisions. What helped in my case (I was doing my own scene, very large objects and a looot of water ;) but I wanted to learn about the fluids in Blender from your tut, which was great), was the Surface Thickness in the Effector settings. I had to set it to 0,5 and it worked even with very low resolution divisions. Thanks anyway, great tutorial!
you just saved my life, i had no idea why it wasnt working, just thank you.
Thank you!
thank you!! I was just trying with a basic box and I was wondering if it wasn't working because it wasn't thick enough
Thank you so much for this lovely helpful tutorial...❤❤❤
Glad it was helpful!
@@RyanKingArt ☺️
Idk why but love how he say "Shift + A" lol
Great tutorial man
Haha thanks
If you want to set up a very small fluid source, set Flow as mesh plane with IsPlanar checked and resize it as much as possible, the effect will now depend only on ResolutionDivisions.
To reduce the fluid even more and give it more character, add to your FluidDomain a Displace Modifier with Strength eg -0.02 and after it a Subdivision Modifier to remove the resulting artifacts.
Remember that this sometimes breaks brush painting with Dynamic Paint.
Also, I had a case where I was using two separate fluid domains in one place and wanted to use them as a brush dynamic paint, but either one or the other didn't work, adding them to one collection and using the Brush Collection in dynamic paint options helped.
Sometimes it happens that when we attach Flow mesh to the armature, the fluid simulation will not work, you need to bake the Flow mesh movement and detach it from the armature.
Thanks for the tips! 👍
Intro had me thirsty af lol
Haha yeah watching this made my thirsty too. 😄
Made me need to pee.
You too?
Yeah water is nice
U want mine to quench 🥵😏
Maybe this will help some people, this is what worked for me
The icosphere isn't making water -> delete the icosphere and remake one that hasn't been scaled down too small
The water keeps clipping through the slope completely and going down in a straight line -> Make the slope and the cube two different objects
The water keeps clipping through the object even though I've raised the resolution to 100 -> Size everything up a lot except the icosphere.
Thanks!...it works
This is a very fine tutorial. Ryan clearly puts a lot of work into the structure of his presentations.
thanks!
Man.. they way you explain every common little step like we're kindergarteners on every video, despite some of them being pretty advanced.. I really appreciate it😆
thanks!
The only guy I have found the most help
glad it helped!
I am a newbee with blender, I have learned most of your tutorial for material and it really helped me a lot. Thank you so much for everything you have done. 🥰🥰
thanks for watching!
The force is strong with this one :) Can't wait to toy around with all this and so much more and especially integrate it into a complex simulation for most of my inventions (from al things architectural and urban + interior design, vehicles, clothing and footwear and practically all sorts of objects) And also, I'm quite curious what the 5000 series will be capable of :) Especially in your hands :) may the FORCE BE WITH YOU !
for anyone not seeing fluid in motion @8:00 : go to flow source of the icosphere -> change the surface emission to 1
Yo, thank you so much!
Highly Recommended. Thanks for the "deep dive" into fluid sim. This has helped me tremendously and would steer anyone who wants to learn blender here first. 🤘
glad you like it!
Thank you! I love controlling when the fluid is shooting out!
I love your tutorials! They are very thourough and teach not only how to make the simulation but a bit more about why you're choosing certain options. Thank you for all the hard work you put in!
Glad you like them!
@@RyanKingArt quick question, do you know how to make the end of the water simulation taper off rather than fall as a glob at the end? I hope that makes sense. ☺️
Great Video !
Loved every part of it ❤
Your teaching style is really relaxing and Awesome !
Glad you liked it!
Thank you for creating such a clear and clean explanation video
Thank you for explaining the domain object. That was what I didnt understand before
Glad it was helpful! thanks for watching.
pretty nice, awesome video. easy to follow and very instructive. I guess it is one of the most complete tutorials about fluid simulation. Thank´s
Glad you liked it!
I always watch your video cause you teach us slowly and your tutorials really help me. You are my best teacher
glad my videos are helpful! thanks for watching!
I've learned a lot by watching your tutorials. Thank you for all you do. Subscribed.
Thanks for the sub!
Dude, you're the Bob Ross of Blennder! Only faster and not making anyone go to sleep
thanks!
@@RyanKingArt What machine are you using for such renders, and is there anything you DON'T know? Congratulations!
ok two videos in -- I def shoulda subbed on the first video. thank you!!
thanks for watching!
Stopped by because I couldn't figure out why my fluid sim wasn't simming (it turned out my outflow object was too small), stayed around to the end because it was so well presented.
Ahh ok. thanks for watching
First off I've been using blender for about 7 years giver take.
I've created muscle memory and then I didn't use the program for a long time and then created muscle memory and then didn't use it for a long time. I've watched hundreds upon hundreds of tutorials online from various people.
Your tutorials by far are extremely exemplary!
I watched a lot of Ducky video Tutorials. By far you are the best at explaining. U take the time to teach people and that's amazing you don't skip over anything.
I am just so impressed with your tutorials and your ability to create a immersive environment in which to learn them.
I just have a question.
I did this tutorial and when I added motion blur it made it look like it was gaseous.
I've spent hundreds of hours watching your videos and trying to emulate what you do. You are a freaking genius.
Thank you for all that you do and I wish that I could support your page, all your pages I should say.
I'm just broke as a joke.
You are a huge inspiration!!
One last thing, if you don't mind me saying is that, I use Imperial.
I don't know metric.
It's possible that my viewing instructions might be different because I don't use metric settings.
Your input would be greatly appreciated.
Ty
perfect just the thing i'm looking for to learn next, thanks ryan
thank you for watching!
i was literally waiting for this 😂 thank you, great video
thanks for watching!
Really a best Tutor of Blender ,Very patiently explaining every option ,Its possibilities and its output outcomes ,Thank you so much 😊
thanks for watching!
@@RyanKingArt thank you Ryanking sir ,Love from India 🇮🇳 😊🙏
finaly a tuto that worked! it's the 4th i try thank's a lot
Really marvelous tutorial
God bless you
thanks!
Big Thanks, Ryan!!! You and your brother are Amazing. I've been working on a fluid sim lately, and this is perfect. Infinite Thanks and Appreciation for you. God Bless
glad you like it! thanks for watching!
It took me a while to understand why I wasn't seeing my simulation preview in the viewport. The reason is because, when set to "Replay", it caches the sim, and if you make any changes those changes won't update, because the cache is still there. To reset the cache, you can change the resolution-then back to default again. For example: You played the sim at 32 rez, so reset set it to 34, then back to 32, and when you press Play you'll see it updated.
Thanks, i was really waiting for this one.......❤❤❤
Hope you like it!
Excellent tutorial, easy to follow. Thank you.
glad to hear that. thanks for watching!
Oh my god, youre king in blender Tutorial
+Some tips for those users who doesn't have 128 cores threadrippers...
•domain size *must be* as smaller as possible because mantaflow optimizations is somewhere near titanic's current position and it would calculate nothing most of the time.This small thing could save plenty of hours of baking time.
Also smaller sized domain could have less resolution than poorly sized one with bigger resolution with the same voxel size which also means less calculation time.
•always use particle size 1.05
•Diffusion 1000000x > viscosity
•Adding Smooth modifier on domain for render with facfor=1 and ~5repeats *drastically* increase quality of lowresolution mesh
•you can never touch "mesh" settings on domain. completely gives nothing except wasting time to play with them
Great tutorial! Fast-paced and easy to follow!
glad you like it!!
Thanks you
We need all blender physics tutorial from you
thanks! This video has been getting more views then my average videos, so maybe I will make more simulation tutorials in the future!
Great tutorial
thanks!
Wow. This was so so helpful. Thanks so much
glad it helped!
So, there must be a problem... When I lift my resolution to 100 the fluid does NOT follow the effector track in order to flow directly into the extruded cube. Can you help me with that?
This is the best tutorial I've found so far, but I cannot figure out how to get it to work. I did all the same steps and nothing ever happens. Even after making everything absolutely massive and trying to change the resolution and playing with all of the other settings, nothing ever happens.
Nice one, Ryan!
thank you!
Really appreciates your videos.. Big thanks.
Glad you like them!
awesome tutorial the material part was super useful
Glad it was helpful!
@@RyanKingArt wow I just realized you reply to almost every comment that's really impressive also I finished my fluid sim it's on my channel
@@NeonLabsss cool I will check it out!
Bro, you are a Goat, keep up the great work!💯😎👍
thank you very much!
You're my hero!!! Thanks a lot! ❤
You're welcome!
excellent!!!!!!!!!!!!!!!!!!!!!!!!!!!
thanks!
A Tutorial about the New hair System in blender 3.5 would be nice 😊
thanks for the idea! 👍
Nice!
starship is going to launch tomorrow!! 🚀
Thanks! Yes I'm excited for the Starship launch tomorrow!! 🚀 🚀
@@RyanKingArt IM AM STREAMING!!
WE HAVE LIFTOFF!!
@@KionLionGuardOfficial Yep I was watching the SpaceX live stream!
For everyone having problems, You have to scale the objects up larger than he's doing. It wasn't working for me until I did that.
thanks for sharing
Fluid simulations have never ever worked for me in my 7 years of blender, I have done everything you have done but nothing is coming out of my thing even after rescaling
Tbh this guy teaches blender more simply than blender guru
glad you like my videos
How make Realistic fire in blender ? if you can please make tutorial .
thanks for the tutorial request 👍
Awesome tutorial Ryan ! Im making a sink to test it, put the icosphere inside the tap :D
great! 👍
Great tutorials!!
Glad you like it!
Not to be off topic, but can you do a video on "Procedural Water Drops", for use on a soda pop can or a glass cup?
Your teaching skills are top notch, the best on TH-cam.
thanks for the tutorial request, I will consider it. 👍
thanks for the tutorial and explanation.
You are welcome!
@@RyanKingArt Hope you can do tutorial for water ripple and water splash too.
awesome video I'm a beginner to blender this video helpful to learn a lot of things
Glad it was helpful!
Tip: If you cant save and it crashes, recover it from auto save menu
Yep that's a great way to save your work 👍
Hey man thanks so much, this and the cloth sim tutorial have been extremely helpful, and your teaching style is excellent. Perfect amount of repetition / reiteration in certain areas. Just one question though, is there any particular reason you use the denoiser in the compositor as opposed to using the one in the render settings?
I've wondered about the denoiser as well. I remember a couple years ago some TH-camr suggesting using the denoiser in the compositer (with "Denoising Data" checked on, and Denoising Normal and Denoising Albedo plugged into the Denoise node in the compositor) so that's just how I've done it without really knowing why.
But now in 2024, is there a "best" way to do it? Is some version faster / is some version higher quality but slower?
How did you learn blender? What courses did you complete for that? Or did you learn blender software only through youtube channels? If you can please reply for this
Thank you needed this so much
thanks for watching!
This is awesome. Thanks
Glad you liked it!
I'm a beginner and I'm quite sure I'm gonna learn fast with you. I come from unreal engine. I thing blender and unreal is a quite wonderful workflow.
hope the video helps!
31:15, your face trying to not say what we all think about 😂 Great tutorial!!🤟
You mean this? 💩 😂
Thanks a lot.
you're welcome!
Thx! Very nice tutorial!
Glad you like it!
i love it 😍your tutorial
thanks!
The best tut thanks
glad you like it!
thank you
welcome!
Thank you bhai
at 20:58 my outflow doing nothing. I am not sure what I am missing.I am using 3.6
I am wondering why you rendered out the animation as individual images rather than a video format. Does it save time and or storage? Nice video thank you!
thank God for the timestamps!!
you're welcome!
Great lesson. Tank you very much indeed!!!1
Awesome tutorial! This is a great place to begin, well-explained and a good pace.
I have a question to take it further though: if you want to the fluid to not be uniform (lava flow is my ultimate goal, but same would apply to dirty water or mixed color paint), can you MIX two materials together in the fluid simulation?
I have had no luck with any of this.. I can get everything to work but I need a larger domain, when I do that I no longer get water from the flow its like having a large domain screws it all up no mater what I do, it just borks. :/
You're just amazing❤❤.
Your tutorial helps me a lot😊😊
glad to hear that!
I have a request..
Can you make a tutorial on products animation?
When I increase the fluid simulation resolution the fluid falls for a very short amount of time and then stops. The fps shows 24 so I don't think the simulation itself is frozen
Thank you again Ryan.I am a little rusty atm xx
Amazing tutorial as always. I'm having difficulty removing the Domain box for rendering. I've clicked Mesh and also looked at Viewport but no option for NONE. I'm using 3.4.1. Any suggestions?! Thnx
Thank you for this tutorial !
you're welcome!
Thank youuu you explain stuff good :)
thanks!
@@RyanKingArt:D
you make it look easy
물 시뮬레이터를 어느 정도 배우고 색깔을 조절 하는 방법도 노드 배우는 방법도 여기서도 배우지만 강좌의 내용이 비슷하니 내용의 이해력이 좋습니다. 저는 범고래, 돌고래 애니메이션을 만들 준비 하고 있습니다. 이제는 파도가 부딫히는 원리를 배우는 단계입니다. 파도에대한 애니메이션 강좌도 있으시다면 부탁드립니다. ^*^
i had no idea how to make water thx for the help
You're welcome!
@@RyanKingArt :)
Amazing tutorial! Btw are you gonna do some new tutorial like this but in newest version?
Damn you're good. You must have gone through professional training. I can't get my head around the nodes, but I know they can't be avoided.
Thanks! Actually I self taught myself Blender just by watching tons of tutorials on TH-cam and practicing a lot. : )
0.5x or 0.75x speed makes the satisfying to watch
Cool I will try that 👍
what a good tutorial, god damn
glad you like it
Thanks! So, hypothetically, we have a scene with a great deal of steam coming from vents, is it better to bake the steam, than add it after creating a scene for rendering purposes? Plus, what should we think about in regard to scale when it comes to using simulations for a set piece that might be extraordinarily complex?
Thanks for your support!
I would recommend baking simulations at the end of a scene creation, because simulations can slow down the viewport, and if you change something in the scene, you might need to re-bake it. And yes, modeling to scale can be helpful, to make the simulation look more realistic and to have a more realistic simulation speed.
@@RyanKingArt It was good times! There is no shortage of tuts on fluid simulators, but you avoid the fluff and unnecessary, if not infuriating, sidenotes to amuse, and you have a pristine attention to detail.
It is going to be time for an RTX video card in my future in order to do the things that I want to do that will be compatible with Cycles. Going forward, I would love to see a tutorial on retopology for characters in order to hit up UV mapping and procedural textures on sculptures/figures with intentions to animate while reducing rendering times.
Thanks, Ryan.
thanks for the video ideas!
How to set the flowrate in a more accurate way? For example 0,5 m3/s of flowrate independently of inflow shape/volume? If no… how I can calculate it?
This was great
thanks!
Hi Ryan, thank you for this, however after adding all the fluid types and settings and even increasing the size of the iscosphere, I`m not getting the fluid animation. I have even baked it but still nothing, what could I be missing?