+Pedro Infante Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY
I will be using this video for my 09 300 limited tomorrow. Thank you for doing this, I'll post and let you know how it went out if there was anything different then seen in this older/different model.
+Cris Lednum Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Will it fit a 2006 300c, I put the key in unlocked it pulled the door handle and fell off as of someone had broke it put it back on. While at Costco smh
+SoCalCrawlers Thanks for checking us out. We are sorry to hear that happened! These handles will be correct for your 2006 300C as long as you have Keyless Entry. 1aau.to/m/Shop-1AAuto-c
+James Clark Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/chrysler-300-dodge-magnum-exterior-door-handle-driver-side-front/i/1adhe00785?TH-cam&CTA+Comment&A5cfGfn1XiM
My 2010 Chrysler 300 lock cylinder had to be installed from the front of the door, not from the inside as shown in the video. Ended up having to unbolt the entire handle and reinstall it again with the lock cylinder in the handle first. Great video helped a lot but be sure you check to see if the hole flange of the lock is on the inside or outside before you try to install the new one
Great video guys but u see the weather shield I’ve got like a black plastic insert that wo t allow me to get to the rod and bolts yours doesn’t have this in your video how do I remove this?
+MrDolaB Thanks for watching! Glad we could help. If any other viewers would like to purchase the parts in this video please click this link: www.1aauto.com/chrysler-300-dodge-magnum-exterior-door-handle-driver-side-front/i/1adhe00785?TH-cam&CTA+Comment&A5cfGfn1XiM
The most challenging part was pulling these three white clips stuck in the door to be reinserted into door trim panel. I will explore an option of using late 90-s Corolla clips (which are better handling multiple use and readily available) if diameter of the hole in the door sheet metal will match (7.5 mm)
+mkrp4 Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/chrysler-300-dodge-magnum-exterior-door-handle-driver-side-front/i/1adhe00785?TH-cam&CTA+Comment&A5cfGfn1XiM
Would be nice if the person or company that did this video replied to peoples valid questions or concerns. There are some replies but none where people really needed the help. Doing my door handle in a day or 2 & Im hoping it all goes smooth.
Do you sell the small white clips shown at 2:29 on the right that hold the door panel to the car? I havent been able to find them anywhere from any parts stores or even ebay. I really dont want to goto the dealer and probably end up paying $10 for 1 plastic clip.
I bought my handle from 1A auto and fixed it myself however when putting everything back together the door doesn’t lock and the handle inside does not work both worked before doing any work what could I have done is it a simple fix please help
Same here. The the window for the car shown in the video looks more aligned with the bolts. The one I’m trying to work on the bottom bolt seems to be blocked and not aligned with the window. So even the socket extension can’t get to it
Thanks very helpful video hardest parts where definitely getting that bolt behind the window and yeah the 3 clips on the door need be removed and placed back on the door to get the door panel back on don't think this part was mentioned in the video
+Mark Williams Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Im not very good with cars, would this be something you recommend to someone who doesnt know much about cars? Update: i ended up getting the handle yesterday, and fixed it today. It wasnt very hard. The hardest part was the bolt behind the window. Took me an hour and a half, which probably saved me about $100 from a mechanic.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I bought my door handle from 1a Auto Parts and watch the video did it myself and it was a great experience. Thank you!
+Pedro Infante Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY
Thanks!
Helped out so much. Especially the hidden key lock hole that I didn’t notice when removing the lock latch
good job just what I needed.
Great 📹 video
I will be using this video for my 09 300 limited tomorrow. Thank you for doing this, I'll post and let you know how it went out if there was anything different then seen in this older/different model.
+Cris Lednum Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Will it fit a 2006 300c, I put the key in unlocked it pulled the door handle and fell off as of someone had broke it put it back on. While at Costco smh
+SoCalCrawlers Thanks for checking us out. We are sorry to hear that happened! These handles will be correct for your 2006 300C as long as you have Keyless Entry. 1aau.to/m/Shop-1AAuto-c
Great video, replaced my door handle without any issues. Thanks
+James Clark Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/chrysler-300-dodge-magnum-exterior-door-handle-driver-side-front/i/1adhe00785?TH-cam&CTA+Comment&A5cfGfn1XiM
My 2010 Chrysler 300 lock cylinder had to be installed from the front of the door, not from the inside as shown in the video. Ended up having to unbolt the entire handle and reinstall it again with the lock cylinder in the handle first. Great video helped a lot but be sure you check to see if the hole flange of the lock is on the inside or outside before you try to install the new one
Great video guys but u see the weather shield I’ve got like a black plastic insert that wo t allow me to get to the rod and bolts yours doesn’t have this in your video how do I remove this?
You said don’t take out the black pins since that piece is all on it’s own but at 2:15 you clearly have them out
Very good job with the video. After watching you do it I feel like I've done it many times. Thank you.
+MrDolaB Thanks for watching! Glad we could help. If any other viewers would like to purchase the parts in this video please click this link: www.1aauto.com/chrysler-300-dodge-magnum-exterior-door-handle-driver-side-front/i/1adhe00785?TH-cam&CTA+Comment&A5cfGfn1XiM
Veeery helping and useful video! Saves a lot of time and nerves!))) Thanks from Russia!
+Александр Макаров Thanks for checking us out! 1AAuto.com
How does the latch rod connect in the door?
Thanks for your dedication guys!
Thanks for checking us out. 1aauto.com +Denis
The most challenging part was pulling these three white clips stuck in the door to be reinserted into door trim panel. I will explore an option of using late 90-s Corolla clips (which are better handling multiple use and readily available) if diameter of the hole in the door sheet metal will match (7.5 mm)
+mkrp4 Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/chrysler-300-dodge-magnum-exterior-door-handle-driver-side-front/i/1adhe00785?TH-cam&CTA+Comment&A5cfGfn1XiM
Would be nice if the person or company that did this video replied to peoples valid questions or concerns. There are some replies but none where people really needed the help. Doing my door handle in a day or 2 & Im hoping it all goes smooth.
+Never A Dull Moment How can we help you?
Great video some of the clips no Chryslers is way different then a lot of cars
+live life Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Do you sell the small white clips shown at 2:29 on the right that hold the door panel to the car? I havent been able to find them anywhere from any parts stores or even ebay. I really dont want to goto the dealer and probably end up paying $10 for 1 plastic clip.
Thank you for the guide. Very helpful.
I bought my handle from 1A auto and fixed it myself however when putting everything back together the door doesn’t lock and the handle inside does not work both worked before doing any work what could I have done is it a simple fix please help
Hi all... Is it necessary to disconnect the battery before doing this work? Thanks
I'm trying to do it right now but I can't get the bolts out something is in the way or in other works next to the bolts so I can't get it in screwed
Same here. The the window for the car shown in the video looks more aligned with the bolts. The one I’m trying to work on the bottom bolt seems to be blocked and not aligned with the window. So even the socket extension can’t get to it
I need the rear driver's door handle of the Chrysler Aspen.
Thanks very helpful video hardest parts where definitely getting that bolt behind the window and yeah the 3 clips on the door need be removed and placed back on the door to get the door panel back on don't think this part was mentioned in the video
+Jesus Capote Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
Yes, Part # please for those inside panel door retainers?
I totaled my 300 so I’m using the intact parts to practice wrapping
Help. For 1.5 months cannot open driver door from inside or out. Chrysler Pacifica 2004.
Great video. Thanks a ton for your work.
+Mark Williams Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Can I buy the plastic clips for the handles?
+Randy Marsh Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
Im not very good with cars, would this be something you recommend to someone who doesnt know much about cars?
Update: i ended up getting the handle yesterday, and fixed it today. It wasnt very hard. The hardest part was the bolt behind the window. Took me an hour and a half, which probably saved me about $100 from a mechanic.
Well i decided im gonna give it a try. Ill reply my results in about a week
Would like to see a sunroof removal
Perfect video. Thanks
+The Ice man Series Thank you!
The screw behind the glass is a little tough but everything is easy
Thanks
Do the rear door
TY sir
i mean do have to take that wether shielding all the way off.
Even with trim tools that looks stressful. I hate all those clips