How to Download and Slice 3D Models from Thingiverse using Cura - Tutorial for Beginners
ฝัง
- เผยแพร่เมื่อ 28 ธ.ค. 2020
- Wondering how to download a 3D model to print on your 3D printer? I'll show you how! First, We'll need to download a .STL file from Thingiverse and then prepare it for printing using the Ultimaker Cura slicer software.
The foldable wall hook we printed: www.thingiverse.com/thing:467...
You can download Cura for free: ultimaker.com/software/ultima...
Want to learn more? check out my Start to Finish 3D printing series for beginners: • Start to Finish 3D Pri...
🙋♂️ NEW to 3D Printing? ➡ Check out my FREE 3D Printing CrashCourse for Beginners video • Don't Know Where to St...
Enjoy my work? Consider supporting me ko-fi.com/rcwithadam
More videos and resources on my website rcwithadam.com/
You can also support RCwithAdam by shopping through these affiliate links! (really, your support DOES make a difference!)
Amazon amzn.to/2FHjkwI
Banggood www.banggood.com/custlink/Kvm...
THANK YOU!
▶️ FlySky videos here! • FLYSKY Tutorials, Tips...
📕 FlySky i6X manual: www.flysky-cn.com/i6x-xiazai-1
📘 FlySky i6S manual: www.flysky-cn.com/i6s-xiazai
📂 FlySky firmware on GitHub: github.com/open-flysky/FLYSKY...
-------
Mandatory Disclaimer:
I participate in Affiliates programs (Amazon, Banggood) so, if you click on one of the above and make a purchase, I may receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
*REMEMBER, always use caution and your best judgement when building and flying RC aircraft. Be a good neighbor, and HAVE FUN!*
-----------
About RC with Adam: Adam's goal is to help YOU build COMPETENCE and CONFIDENCE in the RC hobby (and beyond!) through creative, educational, and encouraging videos featuring Radio Control airplanes, drones, electronics, and 3D printing!
#RCwithAdam - วิทยาศาสตร์และเทคโนโลยี
this video really helped me because I couldn't get the proper files for cura.
Yeah
I have to say that I'm really appreciative that you did a quick run through the settings ... it was very helpful. Thanks so much.
Thank you so much for this video! Recently got a prusa mini. Even though this was not using the prusa slicer I was able to follow your steps despite the slicer difference and complete my first print of thingiverse! The instructions were super clear and easy to follow!
Thanks for taking your time to explain with all those details
Best tutorial I've found on the basic steps from retrieving a project file to printing the project. You just got a new subscriber. Cheers brother
Glad it helped! Thanks for the sub!
thanks alot im new in this hobby with this video i managed to move on to my first progect ,keep it up helped me alot
Thanks for this tutorial. Perfect intro to using Cura.
Thanks Adam - I am a complete newbie and finalizing assembly of my Prusa - this helps a ton
Oh cool! Congrats!
Thank you so much for this. I just got a Aquila c2 for Father’s Day.
This was an awesome video on how o use Cura with an STL file. I learned more from this short video than I did from 6 other videos touting the same instruction set. Thank You!
Glad I could help! And thanks for the feedback.
Thank you for this, we are new and we arent tech savvy...but we made a tiny platypus. We really appreciated this video, super helpful!
thank you - you explained this process in very understandable way...
Bro you are such a life saver you just earned a new subscriber
Thank you for these tutorials on 3D printing. I think I'm more confident to buy an Ender soon. Please release more videos like these 3D printing series...
Hey that's great! Will do!
Annoyingly thorough. Well done👍
The best and most straight forward video on how work with files
Thank you
Thankyou so much. Totally new and need as much unravelling as i can get on this 3D printing caper...
So clear and concise. Ty
Waiting on my CR-10 S Pro, and either so many ideas in my head wondering hoe to get started this was a clean cut concise little video, I feel like this is going to be a breeze.. thanks !
Great tutorial for beginner like me!
THANK YOU!!!!!!!!!!! I've been for an accurate and easy to follow along and after what felt like forever I finally came acros video and it was the first to actually help!!! THANK YOU AGAIN!!!!!!!!!!❤❤❤
Glad it helped! Thanks so much for the feedback! Welcome to 3D printing!♥️👍
Unwasted time watching this video simple and quick, Thanks for a quick run down man.
Glad I could help!
thankyou so much for this I've been needing something just like this to begin my 3d printing journey.
Glad I could help! Welcome to 3D printing! 😃🙌
I’m new to 3D printing this was helpful I wasn’t aware I needed to slice a file from websites like yeggi or thingiverse.
thanks nice video was very helpful for learning some basics
thank you a lot me and my dad are trying to figure out how to upload files to the 3d printer this helps a lot
I’m in the exact same situation
Thank you for the tutorial, I'm new to 3D and have been very confused about it all but your tutorial has helped so much. Looking forward to watching more videos
Great to hear!
Could you make a tutoral with the Creality CR6SE with the slicing and all please.
Thanks man great video thanks for the information straight forward 👍
💯
Thank you so much this video is so helpful
Just got my 1st ender v2 yesterday. Gotta get this side hustle going lol. Great walk through 🤘🙌
im getting mine in a week!!!!!!!
THANK YOU SO MUCH!!!!!
THANK YOU SO MUCH
Awesome vid finally can you my 3d probter
Awesome video. Thanks for sharing.
Thx that was very helpful
Thanks so much for sharing
Just got the Anycubic Vyper, I downloaded Cura but can't find it under the preset printer..is there one I can chose that is kinda similar?
Great Video thank you so much!!
thank you so much!!!
Nice video, thanks, very informative 🎉
Thank you!
Thanks for this thorough video. Purchased a download from Etsy to use on my new Ender 3 S 1 Pro. Followed your instructions and it worked perfectly. Kudos😊
Glad it helped
New sub. Can not believe how you don't have more subs. Fantastic
Thanks! Always glad I could help!
Thanks for the tutorial, I just got an Ender 3, very helpful for setting up my first print!
P.s. I can't wait to tell my professor STL stands for Standard Triangle Language.
Happy to help!
I didn't see ended 3v2 on the list to setup the profile. I haven't looked at mine yet but just noticed it. I haven't even downloaded it yet lmao. Trying to learn everything possible first to get the feel for all this
👍🏽just ordered the Neptune 3 last night, i need all the help i can find😂👍🏽🤗
How do you get into the software that you can model wotg
hi im just start whit alfa wise u10 samen cr-10
but wy it start home poszien and not in the middle
Ty so much
Awesome video
TYSM
Does it work on a toybox
This video is Sooo good! Just what I needed to get started. Thank you for not going in depth on all the settings. You are correct, that can come later, we just want to print something! Very well done!
Phil
Why did you sign your name?
Courtesy! As a guy that answers hundreds of comments per week, I like to personalize my reply with the viewers name. In your case, I'd rather not type out _Domthebomb_-@@_Domthebomb . Also, it personalizes the reply, shows I'm interested in the makers content. Is any of that understandable?
❤thank you
How can I edit something I download from thingiverse or any other Site I can get a .stl.
I Tried to use tinkercad but it keeps telling me the file can’t be more than 25MB and I don’t know how to shrink the file to open it or is there another program I can use to open the file to edit it the file I’m trying to open and make an edit to is 92MB and it’s a .STL
thank you for all the info, iam just starting so this helped alot, trying to select the right slicer!!! just ordered a ender 3 v2,is this the slicer to start with??? i want to download the right one,
Hi! Glad I could help. Yes, Cura is the one I would start with. It's the most popular and has the most tutorials for it.
@@RCwithAdam1 thank you, checking it out now for the download, wow alot to learn,thanks
Thank you
if i have to ender 3 v2 do i use ender 3 or ender 3 pro profile??
thanks in advance :)
Watching...
So if you have an stl file that needs supports put in you just click the support box and the software will automatically add supports where they need to go? Thanks for the help! Vid was great.
Yes, as long as the Supports option is turned on! Except, sometimes the supports need to be modified if the software doesn't get it right.
How do you print a skee ride
I never expected to have to put files on to a card then take the card to the printer? Why do we have a printer cable?
I love your vid it helps a lot but am i like the only one that never notised tha face cam 😂😂
It doesn’t show that on mine when i click running ender s1. Pro any advice thanks
what if your printer doesnt show up?
Just make a custom one with the dimensions of your printer.
Make a custom one or choose the closest model to your one but note the one you chose if it has higher torque and movement you may want to reconsider the hypothetical printer option and choose the ideal one
Thx
I just got one for my son for Christmas. Yes. It was for my son…honestly…he really wanted one…he didn’t know he wanted one…I just assumed he did 😂
STL means stereolithography, but is also referred to as Standard Triangle Language
True.
Fantastic video for me as a beginner. Do you have a video for how to set the BL TOUCH in Cura for the right height from the build plate. I ask as My nozzle sits at 10mm all the time and I've been told you can set it in Cura. I'm brand new. Love the video
Hey thanks! I don't right now. Haven't set up a ABL system yet.
@@RCwithAdam1 cheers anyway
Thanks for the knowledge you have given me. One question. Can you have more than one file on the SD card or do you need to clear it after the print? If you can have more than one file, how do you choose the one you want? Excuse my ignorance...just starting out.
Oh yeah! You can have hundreds of .gcode files on the SD card (but that would get cluttered). You select the one you want to print using your printer's interface (screen or buttons).
@@RCwithAdam1 Thank you so much, Adam, much appreciated.
Thank you for this! I'm not technology inclined in the slightest and my family won't help me due to being busy.
And for voxelab?
followed all these steps from downloadin to getting the gcode file but for some reason my printer (anycube mega X) doesnt recognise it on the SD card. any tips would be much appreciated
I've had something similar happen with my Fokoos odin5. Usually power cycling the printer and deleting the gcode from the card and putting it back on does the trick. Not sure what the cause is yet.
My models just keep going to meshmixer(another 3d print app) and i cant get rid of it someone please help me
How to level the printer bed
I have a question I set up a software to put cura on a chromebook and my files don't go to cura for somereason
M8 administration
Hey I am very new to the 3d printer world and Mac 🖥️ world I downloaded cura but I don’t know how to get it it 😂 how
I tried to do that thing that you did with the zip file drag-and-drop and it did not work I have an HP laptop running off of Windows
You need to open (or "extract" or "unzip") the zip file. You may also need to use the upload option instead of dragging and dropping.
Does it also show how long it will take?
Yes, it gives an approximate time (which is fairly accurate).
Did I miss anything important? Let me know!
Hello just saw your video loved it. But I still have questions. Is there any way you can contact me. I really want to learn this. For I have knee injuries and can’t work and I want to start doing this to get by. So please let me know if you can help me learn this. Thanks.
Hi! Glad it was helpful! You can email me at Adam @ RCwithAdam .com . I've been swamped lately, but I'll try to answer as best I can! 👍
zeroing axis and bed leveling and all those stuffs before printing would make the video a complete guide.
About the zip file, I am on windows so where do I get to the zipped files? Also how do you eject it to the 3d printer files?
If the file is downloaded as a .zip file, you should be able to "unzip" it by right clicking and selecting "open" (or maybe "unzip") or by double clicking on the file. I'm not sure what you mean about "eject it to the 3D printer files". Do you mean how to get the .gcode files from the computer to the 3D printer? For that, you will save the .gcode file from the slicer and then move it onto the SD card (you can drag and drop it usually). Let me know if this helps.
@@RCwithAdam1 Thanks, what I meant by eject it was telling the 3d printer to print it.
That will depend on the specific printer interface and firmware. But basically, you insert the sd card in the printer, then select the file on the printer's screen and press print.
I downloaded a model from Cults and it’s a full armor model and it doesn’t open
What should I do :(
Or where should I open it :(
Is it a .stl file?
@@RCwithAdam1 no 😶 that’s why I don’t know where to open it
What if I uploaded a Model of Someone's Face and I wanted to make their Nose Longer? How would I do that on Cura?
what do you do if your computer doesn't show the print via usb, it just says save to file
Is your printer connected to you computer via usb? I usually only use the "save to file" option and them transfer that file to a micro SD card for the printer.
I have been trying to print something from thingiverse all day and it spews fillament out while my printer is preheating and I use a ender 3 v2 i dont know what is happening to make it do that. And another problem I have is when it prints it prints all over the place and the fillament is too thin and in the slicer it is set to a 0.4 nozzle.
Please help
My printer settings:
Bed heat: 75
Nozzle heat: 220
Printing speed: 60
Printer: Ender 3 v2 stock
Material: Hatchbox pla black
just curious did you ever fix your problem
@@seppuku- yeah
@@grimlock_3d could you tell me your solution to the problem i just received my ender 3 v2 yesterday i haven’t had any issues. besides small stringing. but just incase this problem arises i’d love to know what to do.
@@seppuku- I never realy had a fix to this other than to lower nozle tep to 200
@@grimlock_3d i noticed your nozzle heat was pretty high but i wouldn’t think that would be the cause.
but i’m glad you figured it out i like to stay 200-210
I just tried printing a model for the first time and when it went to print it pushed the nozzle down really hard on my bed and started moving and scratched a line down the side of the glass? What would cause this
Hey! That's a bummer! 😕 did you go through the process to level the bed before your first print?
@@RCwithAdam1 I’m a dumbass and had the z axis button too low and didn’t realize it at first 🤦🏼♂️ it’s working good now though!
@@user-jb6hl5se8l glad you figured it out! 👍 I'll bet that lesson will stick with you! 😆
you did not say how you got to the slicer in cura
when i press the download button it just says 404 you have reached the end of the thingiverse, there is nothing cool here... yet. how do i fix this?
Hey! Which model are you trying to download? Maybe it was deleted from thingiverse, or the site is just having issues. Does that happen on all models?
@@RCwithAdam1 no, it didnt happen on all models, there was many models in the folder, it was a set for a keyboard's keycaps.
lol i forgot how to use it and i got the same 3d printer and i didnt even know you had the same one lol
Anyone know how to get the ender logo on CURA?
Hi. Do you mean when it shows a grayed out ender logo on the build plate in cura?
@@RCwithAdam1 yes.
@@_WARL0CK_ it should show up automatically when you use the default Ender profiles.
@@RCwithAdam1 I tought so, probably just a few ender models, I'm using creality cr-6 se and it doesn't show.
No big deal,. I was just curious, tought that was an option or plugin.
for some reason, it just takes me to the download section instead of downloading it all at once. (133 files.)
Yes, unfortunately it seems that Thingiverse has disabled the "donwload all" option for all models.
I've just bought a ender 3 after watching this video. Wish me luck
Good luck!👍
@@RCwithAdam1 had a few problems with sticking to the bed, but after my forth attempt made my very first print, a twisted vase.
Thanks for the channel Adam you have converted me to 3d printing.
why does my print look flat on cura
I'm not sure what you mean. What model are you trying to print?
Yeah,but it was a FLSUN Q5.
Cura isn’t allowing me to find my 3D printer. I don’t know what I’m doing wrong!
What printer do you have? Some just don't have preset machine profiles yet.
But can you sell these products?
Yeah
It was ender 3 v2 🤣🤣🤣
Yooo help gang
What do you need help with?