Hi Capa Breakdown & Rebuild Advanced Frame | Airsoft 2022 | Airsoft Masterpiece
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- Hey everyone! My last breakdown vid done pretty well so I thought some of you would like to know how to do an advanced frame! You want to take your build to the next level? Then watch this vid and go get you that advanced frame!
#blowbackmasters
#airsoft
#hi capa
#airsoft masterpiece
#DIY
#lazerbeams
#fullsend
![[Hi-Capa] Aluminum Outer-Barrel Fitment - improve accuracy and reduce wear](http://i.ytimg.com/vi/n_-5jDLyBJc/mqdefault.jpg)
![ไปอยู่ไสมา - ช๊อปเปอร์ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/sWuVNbRTJbc/mqdefault.jpg)
Man. When I was installing my frame. Something was wrong and my hammer was stuck. Then I found your video and just went step by step. Everything is fine now. Thank you lol
Fantastic!!! I'm so happy this vid was able to help you out! I know it's a bit lengthy but I really wanted everyone to be able to follow along. Thanks for the comment!!!
just finished a 5.1 build and i truly appreciate this guide. thank you man!!
Absolutely!!! I’m just happy it helped 💪
I did this in the bathtub, with the drain closed obviously. I ALMOST caught the spring with the curtain, but then I heard it go over and hit the ceiling and needless to say, the spring has evaporated.
😂! I have to have at least 30 of them somewhere in a magical land of elusive springs 😂! Once u get the hang of it you’ll lose less of them. Blowback Masters has replaceable springs for cheap. Use code HSAFIVE to get them even cheaper 🤘! Also, thank u so much for watching and commenting 🫶! Helps a ton!!!
I am going to watch it when i get home bud but can wait to see it
Just a side note there is no need to remove mag catch doing this job just making extra work for yourself. You only need to remove mag catch when changing grip or you want to get the trigger out.
Correct. Still good for ppl to know how to remove everything. Let’s say I didn’t show it and someone watches this and they need to remove the mag catch. Now they know how. Got to appeal to all ppl and all tech skills/knowledge.
Amazing! Thank you 🙏 The small spring with the valve knocker was driving me mad. Frame installed!
My pleasure! Yes 😂! That is the trickiest part of the whole thing. Glad I could help 🤘!
great video man, good breakdown.
The best to ever do it
Thanks used this to learn how to replace my thumb safety, cuz mine broke, but I still haven’t bought one yet as they are all out of stock.
Sadly they’re out of stock everywhere
Well done
This is helpful for a new airsoft builder like my self
That’s what I like to hear!!! I’m really hoping to help out where I can. I build for others and for Blowback Masters. If you’re interested checkout Blowback Masters on the internet and use code HSAFIVE on your parts. You’ll save some money.
I like the CowCow hop units. Hop wheel will screw down. I like guide rod pin, and the screws to keep the hop unit tight.
I can agree on some stuff CowCow. They definitely make some of the higher end products.
@@HOUDINIIAirsoft Will the EDGE short Stroke nozzle work with other BBUs other than the EDGE? Do you know?
@@pauls.5815 Absolutely! So the CowCow B01 works great with the edge nozzle, standard or the short stroke one. I do suggest getting the AIP o-ring kit for bbu’s. You can find them on Blowback Masters. Use code HSAFIVE to save some 💰. You get this and you should be able to swap out the o-ring on your bbu to better fit the nozzle for better air compression.
@@HOUDINIIAirsoft Thanks for the info. I have $1000s into Hi Capas and still don't know everything. I'm more in the AEG world. I am getting set up to do KG GunKote now. KG is the GOAT when it comes to paint. It goes on really thin 0.0003" thin. Plan to do Hi Capas and AEGs or whatever really. Ill share my results when I get done.
@@pauls.5815 that sounds fantastic! Custom work is booming in this sport! Same here bro! I have a crap load of time and money into Capa’s so if I can help feel free to hit me up! My Instagram is HSA.Houdinii.10
Nice dude keep it up
very beautiful build bro ! congrats!
Thank you 🙏. This is a build I’d did for a friend. I have a few of my own as well.
oww wow bro amazing!@@HOUDINIIAirsoft
Nice build!
Airsoft masterpiece hammer?
I just have the same frame and I ran into a problem that my hammer got stuck after a while of shooting
Will a TM stock disconnector work with this frame?
Yes the TM disconnector should work. Feel free to hit me up on my Instagram and we can probably iron out some issues and get that capa slinging. My IG is HSA.Houdinii.10
Yes I tend to go all AM when building a fully custom capa like this.
11:03
38:39 got to use my gut its the one and only tool for building
😂! Definitely comes in handy and I always have it with me 😂! Thanks for watching and commenting it really helps out 🙏
i have an EMG SAI 2011 DS, which internally, is agonizingly close to a TM advance frame. it has a 'hammer & sear box' that is almost identical, but the asshole engineers decided to make the piece proprietary, and added the slide rails on to that box itself, rather than having them be continuous along the side of the frame. As a result, i might have to 3d model & cnc my own hammer & sear box to get my hicapa to work fully with aftermarket parts
Oof! SAI is not a bad brand either. It’s surprisingly cheaper to just build a custom Capa from ground up the it is to get a stock Capa then upgrade.
Hello, excuse me, where do you buy those spare parts? I need one of the parts of the white container
Greetings from Chile
So pretty much wherever I can find them 😂! I do shop a lot at Blowbackmasters.com, Evike, Amped Airsoft, Rainbow 8, Airsoft Megastore, Red Fox Airsoft, and Airsoft Junkiez.
Loved it.Very informative just one more thing that intro song is off Tap were can I get it from or can you send me a link thank you.
🫶🫶🫶! It’s an HSA exclusively made song. HSA (Hit Squad Airsoft) is my team’s name.
One more question if possible???Will a CowCow steel hammer fit and function in these Masterpiece frames
@@azzanoorbergen2136 Yes. However, I have seen some work and some not. Because of that I typically go with Airsoft Masterpiece.
I installed this frame into my hi capa with a void barrel and a EMG / STI International DVC 2011 / Hi-CAPA Pistol Grip, I even went to 2 places for them to fix and couldn’t figure it out. The main problem is that the trident sear spring would not reach the sear to lay on top of. If anyone might know why please let me know. Thanks.
odds are the grip is not fully compatible. It may fit and the grip screws go in but if the cut in the back of the grip where the sear spring slides in could be cut lower thus not allowing a full seat of the sear spring on the sear. I would try a stock TM grip and see if that fixes your problem. If it does resolve the issue then you know the current grip you're using is the issue. Please get back to me and let me know if this works or has already been tried.
I’m a newbie. Do I need to buy a base TM 5.1 Hi capa in order to start customizing? Or can I buy all custom parts and build the entire gun? Thanks
Great question! Yes! You can buy and build from the ground up.
I know video is old but I just finished a advanced frame build and gun will only cycle hammer half way back.I used LA capa internal.Do you think that would be my problem not using the airsoft master set?
Though the video is old nothing has changed on how to build. My first thought would be because of having LA Capa parts in it. If you want look me up on instagram under CallsignHoudinii. Send me a vid and we can chat. See if we can get it fixed.
I ordered the Airsoft Master kit so once I receive it I will install and reach out to you on Instagram and thanks for getting back to me.
@@jbunchboy4402 absolutely!!! Here to help 😊
Man, i guess its time to buy myself a hobby CNC machine so i can cnc some aluminium slides and frames ^^ it does irks me to no end that youre overplaying the loss of a little spring that we buy 30 at the time of >.
Overplaying??? Number one, it is very easy to lose. Number 2, I only had a couple to spare. Finally, this video is more for people that don’t know how to assemble this frame so it’s a bit important they know the semi complexity because they more than likely don’t have any spare springs 😊.
I got a problem with my hamer when i connect it to my hpa and wanna play it will shoot 3/4 times no issues and then the hammer stuckd half way on the safety pin ish and i have to pull my hamer down with my thumb do u or anybody who reads this know how to fix this… its driving me nuts
I’m having a little trouble with the explanation. So it shoots a few rounds and the hammer will half cock or the hammer will go forward but no pew pew?
Also, if you want, so I can better assess the problem, hit me up on instagram and maybe send me a vid of what’s going on. That can help me help you 😊
what was that song at the beginning?
Custom made song.
do you have to use mineral lube for hi capas or can i use CLP gun lube to lube up my gun? any airsofters can reply
Do not use CLP. It will cause your rubber orings to swell.
Personally I use waldo customs thin and mid lube.
thanks.. do all mineral lubes work just as great at the waldo customs... im new to hi capas and so i want to be very careful on how i do things
@@nolanwilliams7832 tbh I’m not 100 on other mineral lube. Should be safe with it but I’m not to sure.
@@HOUDINIIAirsoft ok.. well i appreciate the advise man!
Hey,
i build from scratch custom glocks with all the bits and pieces and if possible as much of realsteel parts that i can fit.
lights,rmr/sro,magextensions,comps ect...
but what i secretly like about hi capas are the colors you can match and make this really a playable piece of art so to speak.
i love my glocks but i have to admit that this video made think to get the parts and start a hi capa build...lol.
i really dig this transformation you did and the outcome is lush..nice👑🤌🏾
🙏🙏🙏! I have a few others I haven’t really shown too much. Biggest difference I have found between glock and Capa is trigger sensitivity and yes the customization. I hope you build one up and if so let me know how you like it.
@@HOUDINIIAirsoft 🤝🏾
I hope thatvis what are using on my build hahaha 😂😂😂😂😂😂
Is a 5.1 slide a d 4.3 lower
You can swap between 4.3 and 5.1. Each slide will work on each frame. A 4.3 slide will work on a 5.1 frame and vise versa.
yoo Houdinii how u been bro
Good my dude! Just busy. Getting some travel in and chillin with tha fam. How r u?
@@HOUDINIIAirsoft been good
songs name ?
It was a custom song made for my old team.
@@HOUDINIIAirsoft 🔥