If the hammer is too tight, remove material from the hammer not the frame. There is a lip of extra material on the left side of the hole in hammer. Use a needle file or sandpaper to slowly remove a small amount of material until the hammer fits snugly. Do not remove too much or the hammer will be sloppy. ✌🙂
I have a few problems with my hi capa, sometimes the hammer doesn’t stay back and sometimes a double trigger pull, I have check the sear everything’s in the right place, could u do a vid on possible solutions to these problems I’m having, I’m not sure if it’s worn down parts or broken parts lol.
besides the looks a steel hammer is essential when you exchange your hammer/trigger related internals for steel parts (or vice versa, he will need a steel hammer-sear in the future... thats the part that holds the hammer cocked and releases it when you pull the trigger). otherwise the oem zinc parts will wear out quickly rubbing on steel. when you shoot competetive or play airsoft ALOT steel parts are a must have, at least for me. btw, using a steel hammer, you will need a hammer protector pad made out of 7075 aluminum (maple leaf, aip, ect) or the steel hammer smashes your soft oem lower frame over time until it breaks.
Wonderful hammer pin removal workflow ❤️
Thanks dude now my high Capa shoots faster
How do remove the hammer strut why do a full review but not show how you popped the hammer off the rod
If the hammer is too tight, remove material from the hammer not the frame. There is a lip of extra material on the left side of the hole in hammer. Use a needle file or sandpaper to slowly remove a small amount of material until the hammer fits snugly. Do not remove too much or the hammer will be sloppy. ✌🙂
I have a few problems with my hi capa, sometimes the hammer doesn’t stay back and sometimes a double trigger pull, I have check the sear everything’s in the right place, could u do a vid on possible solutions to these problems I’m having, I’m not sure if it’s worn down parts or broken parts lol.
I have the exact same problem
ty man
Are there any differences on the hammer on diff brands of hi capa? like if my hi capa is not tm spec and i used a tm spec hammer, will it fit?
thanks bro
Does this mod serve any purpose besides aesthetics?
besides the looks a steel hammer is essential when you exchange your hammer/trigger related internals for steel parts (or vice versa, he will need a steel hammer-sear in the future... thats the part that holds the hammer cocked and releases it when you pull the trigger). otherwise the oem zinc parts will wear out quickly rubbing on steel. when you shoot competetive or play airsoft ALOT steel parts are a must have, at least for me. btw, using a steel hammer, you will need a hammer protector pad made out of 7075 aluminum (maple leaf, aip, ect) or the steel hammer smashes your soft oem lower frame over time until it breaks.
@@buckethead420 thank you for that explanation my guy makes sense
Channellock not vice grips
my apologies