ICS CXP MARS Komodo SSS / DMR Conversion - Hop-Up & Barrel Upgrades

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ม.ค. 2025

ความคิดเห็น • 32

  • @davidgiesen5845
    @davidgiesen5845 3 ปีที่แล้ว +1

    Great write up. I did the exact same hopup modification to my ICS MARS DMR and although initially the results were promising, the accuracy and fps became very inconsistent. I ended up going back to the stock hop up unit, using an Orga LEX05 barrel, Prometheus purple and Orga Dimension flat hop nub. The results from this combination are incredible and I am able to almost match the effective range of a Novritsch sniper on our team!

    • @GaijinAirsoft
      @GaijinAirsoft  3 ปีที่แล้ว

      I am glad that your setup is working well. I still don't have any issues so far. Once they appear, i will check out your combination. Thanks for the information =)

  • @seeyain8164
    @seeyain8164 3 ปีที่แล้ว

    Keep up the work Gaijin! Very usefull video guides! Just bought an ICS CXP MARS DMR myself. This helps me alot to know what i can upgrade and how to do it.

  • @Peter-fw9wk
    @Peter-fw9wk ปีที่แล้ว

    thank you so much for this video! do you know if this conversion will also work with the CXP UK captain series?

    • @GaijinAirsoft
      @GaijinAirsoft  ปีที่แล้ว

      i am not sure but it should...

  • @efegozen766
    @efegozen766 3 ปีที่แล้ว

    I started to develop a particular interest on that Hop up chamber!!

  • @hobbyzonemodelismo
    @hobbyzonemodelismo 3 ปีที่แล้ว +1

    Looking forward to the next upgrades. Got a komodo myself and would love to have it reach 80m effective range.

    • @GaijinAirsoft
      @GaijinAirsoft  3 ปีที่แล้ว

      I am not sure if you can reach 80meters with DMR, you get to those levels only with snipers where your J limits are way higher 😊

  • @richielee5398
    @richielee5398 ปีที่แล้ว

    Hey that's a nice series of vids you've done here.
    I'm debating building one of these myself. What would you say the effective range is of your modified gun? What fps is it running at with .20? Will the electronic trigger allow it to only shoot in semi only, as a dmr in the UK required this. Many thanks richie.

  • @joeriphilippens9694
    @joeriphilippens9694 ปีที่แล้ว

    i have the same hop up but other barrel and bucking but i run in to problems can you help me

    • @GaijinAirsoft
      @GaijinAirsoft  ปีที่แล้ว

      sure mate, whats happening? explain it to me and i will try to support you =)

  • @AZ-FPV
    @AZ-FPV 3 ปีที่แล้ว

    If you were to change ONLY the bucking .. which one would you go for ? Thanks.

    • @GaijinAirsoft
      @GaijinAirsoft  3 ปีที่แล้ว

      I tried a lot of buckings, the best results i achieved was with the flat bucking set from Modify. I think I have the link in the description =)

    • @edisouza4042
      @edisouza4042 3 ปีที่แล้ว

      @@GaijinAirsoft Have you tested maple leaf's SUPER and Mr.Hop buckings?
      Was the Modify one better than these?

  • @coolmantle
    @coolmantle 3 ปีที่แล้ว

    Nice videos, I have the same aeg, and I went with laylax 407mm as well with laylax purple bucking, never tried other combination, I’m also getting the maxx chamber with 20.25mm nozzle as well, wanted to ask you about your other barrel experience as well, how do you compare the Laylax with current barrel ? And bucking as well? Thanks

    • @GaijinAirsoft
      @GaijinAirsoft  3 ปีที่แล้ว +1

      my experience so far: if the high end barrels are not bent, they perform almost the same. for me the combination of the barrel opening, bucking and the nub fitting there is the most important one. this configuration gave me the best result so far.

    • @coolmantle
      @coolmantle 3 ปีที่แล้ว

      @@GaijinAirsoft awesome thanks for your reply, since i don't have the luxury of trying them all out, i'll use my current set up (laylax 407 + purple bucking + maxx hopup chamber for the moment, in the future, when the hop up worn out, is there any bucking recommendation pairing with the laylax barrel and maxx chamber ? and i'm not sure have you tried this or not, i bought both maxx chamber and nozzle but not the Cylinder Head, would you say that the maxx Cylinder Head is a huge upgrade? thanks in advance

    • @GaijinAirsoft
      @GaijinAirsoft  3 ปีที่แล้ว

      @@coolmantle maxx cylinder head has 2 advantages. 1- very nice fit with the nozzle since they are made from the same company and 2 very good airseal due to double O-ring. it is a good upgrade that might increase your air seal, meaning consistency, but if you already have a good seal, then you do not have to =)

  • @Yuriy-U
    @Yuriy-U 3 ปีที่แล้ว

    Hello! Thanks for your work! Have you got a chance to test it "in the field"? What is the effective range after your mod? How accurate is it? Tnx.

    • @GaijinAirsoft
      @GaijinAirsoft  3 ปีที่แล้ว +1

      Hi, i didnt make a test video since i ve been using that rifle since 1 year in every game. accuracy is pretty good and effective range was around 55 - 60 meters if i remember correctly (haven't measured since a while). i am waiting some new upgrade parts from Maxx for the chamber and with them, i am planning to make some testing and record it. hopefully soon 😊

    • @Yuriy-U
      @Yuriy-U 3 ปีที่แล้ว

      @@GaijinAirsoft Thanks for the answer. ) Cheers. )

  • @wousa88
    @wousa88 3 ปีที่แล้ว

    Hey man, did you hide the extra mm of the new barrel in the suppressor?

    • @GaijinAirsoft
      @GaijinAirsoft  3 ปีที่แล้ว

      if you use a barrel extender. it will not even reach to the supresser. if you do not use a barrel extender, it stops within the flash hider.

    • @wousa88
      @wousa88 3 ปีที่แล้ว

      @@GaijinAirsoft perfect thanks. Now that you finished the upgrade was there a significant difference in accurate distance over the stock parts?

  • @wolf852hk
    @wolf852hk 3 ปีที่แล้ว

    Hello! I want to ask that will this hop up work at the ics pdw9 s3 ? thx

    • @GaijinAirsoft
      @GaijinAirsoft  3 ปีที่แล้ว

      i think it does but i would recommend to check further upgrades on youtube to see if anyone tried it so far

    • @GaijinAirsoft
      @GaijinAirsoft  3 ปีที่แล้ว

      i am not sure, normally pdw models have a bit tighter body but you might want to check some forums to see if other players are using it or not 😊

    • @GaijinAirsoft
      @GaijinAirsoft  2 ปีที่แล้ว

      i am not sure exactly, better to ask the company or check other youtube videos to see if they have done it 😊

  • @nutzy99ify
    @nutzy99ify 2 ปีที่แล้ว

    Modify version ones (non reinforced ) were made to blow up, the reinforced stuff Is good but otherwise garbage

    • @GaijinAirsoft
      @GaijinAirsoft  2 ปีที่แล้ว

      modify version of what? 🤣