How to fix your internet cable modem

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ต.ค. 2024
  • How to fix your internet cable modem. Where to begin.

ความคิดเห็น • 189

  • @mcampb54
    @mcampb54 4 ปีที่แล้ว +37

    HAHAHAH BRO WHEN YOU “JUMPED THAT FENCE RIGHT QUICK” I LOST IT 4:07

  • @SkyTaylor-w1p
    @SkyTaylor-w1p 2 วันที่ผ่านมา

    Thank you for the simplicity of it makes sense without all the extra crud people tend to put in videos

  • @lydiazavala5537
    @lydiazavala5537 3 ปีที่แล้ว +11

    You saved me a week of being off unpaid work thank you

  • @theonewhereisay0h0h0h
    @theonewhereisay0h0h0h 5 ปีที่แล้ว +34

    I scroll down to the comments just to see how many people cursed this guy and his video.

  • @bbhsavage7554
    @bbhsavage7554 3 ปีที่แล้ว +19

    Thanks for explaining Ds Spectrum, Upstream, Downstream, DOCSIS, Flux, OFDM, QAM, Ingress, SNR & all the other important aspects 👌😁

  • @commnsense8360
    @commnsense8360 6 ปีที่แล้ว +254

    I love listening to people explain something they barely know anything about, its cute.

    • @jaysaute8328
      @jaysaute8328 3 ปีที่แล้ว +42

      Do you care to make a video on how to install the cables in the cable box so I won’t have to wait for charter to send someone

    • @mikecove1
      @mikecove1 3 ปีที่แล้ว +4

      Yea it’s weird the way they keep your attention. It’s like you’re almost waiting for the poor bastard to get electrocuted or break something because you know it’s coming...and after they’re all done, they explained nothing.

    • @willharris2607
      @willharris2607 3 ปีที่แล้ว +1

      😂😂😂🤦🏽‍♂️

    • @zwervoo5143
      @zwervoo5143 3 ปีที่แล้ว +5

      “When I was a cable man”
      That’s all I’m saying 💯

    • @nicholassharp8691
      @nicholassharp8691 2 ปีที่แล้ว +1

      This is what he heard the technician talking about with the sup.

  • @litsci1877
    @litsci1877 3 ปีที่แล้ว +14

    If this is a representative cable guy, I now understand why my cable modem still doesn't work

  • @jimflagg4009
    @jimflagg4009 2 ปีที่แล้ว +1

    That sucks it is running near the Power Box. Love that you use the terms we used when I worked for COX. Plant -> Ped -> Tap -> Demarcation -> Ground Block. Bad ground. I use to use Uneven Splitters (Tap Splitters) So that the Cable Modem had the least dBmv drop because internet is usually on the highest frequency.

  • @pzb4
    @pzb4 5 ปีที่แล้ว +6

    i did not know it could only be split once before getting to the modem. this was helpful. my internet is supposed to be 50mbps and i'm only getting about 10 - 20 at best. I think it splits a couple times before it gets to the modem so maybe that's why. i'll have to check. are those barrel connectors ok as long as it doesn't split? thanks.

    • @stupididiot2199
      @stupididiot2199 5 ปีที่แล้ว +5

      No that’s not how it works lol. Being split does not mean splitting your speed before getting to your modem cause in the DOCSIS standard your signal has many different frequencies it can take so splitting it will just direct your own frequencies in the cable to the split one. There’s a reason why we can still use a type a cable made in the 1880s. Because these are analog signals you can have many different frequencies on the wire. Just search up how this stuff works and don’t listen to this guy. I don’t think he’s qualified to talk about this stuff. If you know anyone who is an electrical engineer just ask them because they learn about this stuff in college.

    • @DAMAGE795
      @DAMAGE795 4 ปีที่แล้ว +1

      Negative sir, you need a qualified technician with proper equipment. If theres more than one splitter leave them. Lot of times splitters are used to balance the levels coming into your home. Theres 3.5, 5.5, 7.5, 6, 8, 9, 2.5 splitters.
      We may use any combination of this if you're levels need to be dropped by say 12 dbmv. If you remove a splitter your levels may ski rocket and completely cut your internet off

    • @DAMAGE795
      @DAMAGE795 4 ปีที่แล้ว

      If you have slow speeds call your internet provider. Most slow speeds are caused by a bad connector, line or levels need to be adjusted.
      Unless you have a docsis meter and are aware of your areas system qualifications do not mess with it or you night be charge for customer damage.

    • @devonsykes2598
      @devonsykes2598 ปีที่แล้ว

      @@stupididiot2199 splitters take off db so yes they split signal. They split off 3.5-7 db depending on what spot you use or if it’s a 2,3 or 4 way. You always want the modem off the -3.5db on a 2 way or a 3 way so it doesn’t loose to much. Cable tv can run in low negative db where modems need at least 2-3db

  • @blackshepherdschio
    @blackshepherdschio 5 ปีที่แล้ว +43

    You didn’t tell us how to fix anything.

  • @Tonygontheboards
    @Tonygontheboards 4 ปีที่แล้ว +1

    Thanks for your video bro I do have a question would have your house doesn't have a cable connection going inside the house?

    • @aikimike
      @aikimike  4 ปีที่แล้ว +1

      You will have to have a line ran from the box outside to what ever room you want an outlet installed.

  • @steratorefriends6596
    @steratorefriends6596 4 ปีที่แล้ว +19

    Those bees are wasps Cable Guy

  • @AtlantaTerry
    @AtlantaTerry 4 ปีที่แล้ว +13

    Modem stands for Modulation / Demodulation. Since the Internet does not involve any sort of modulation, therefore there is no modem involved. What your house has is an Ethernet Terminal Adapter (TA) or router.
    Yes, I know some Internet Service Providers refer to various devices as "modems" but that is only because they think consumers are too dumb to learn something new. So they stick with the term for outdated hardware.

    • @antonioterrell354
      @antonioterrell354 3 ปีที่แล้ว +5

      What do you mean?
      An actual cable Modem (for "Modulator/Demodulator") is used and necessary in the home to translate the baseband ethernet data to RF signals and vice-versa, to communicate over RF cable channels with the CATV headend using one of the DOCSIS standards.
      A router is connected to a modem by ethernet cable or when integrated in with the modem it is then popularly called a "gateway."

    • @FunkyBananaBear
      @FunkyBananaBear 3 ปีที่แล้ว +2

      Actuaalllly, a modem is technically called an eMTA/MTA

  • @georgenicholas5210
    @georgenicholas5210 4 ปีที่แล้ว +14

    The green ground wire isn't even connected. Ideally, there would be a ground rod directly below the ground coax adapter.

  • @bayleeschultz3641
    @bayleeschultz3641 5 ปีที่แล้ว +7

    Your voice is very soothing

  • @badassuchiha4875
    @badassuchiha4875 3 ปีที่แล้ว

    How do you Locate the Amplifier which Box is it usually is I got 3 Boxes myself the the Meter one, another for DSL but also a Smaller Box but I fear I don't have one of those Outside

  • @techieboyali8202
    @techieboyali8202 4 ปีที่แล้ว +4

    5:12 When I was a cable man. Sounds like you know what ya doin. 😂😂😂

    • @brad885
      @brad885 4 ปีที่แล้ว

      😂😂😂 probably an in house tech for spectrum

  • @observer.b_e_l_l_i_s
    @observer.b_e_l_l_i_s 5 ปีที่แล้ว +33

    I want to try whatever drugs this guys got.

    • @loganbuckley2010
      @loganbuckley2010 4 ปีที่แล้ว

      same

    • @Cheif_Rocka
      @Cheif_Rocka 3 ปีที่แล้ว +1

      I think I am cus everything he did made so much sense

  • @CookingRamen
    @CookingRamen 4 ปีที่แล้ว +20

    He reminds me of Brian from family guy when he worked at Home Depot

    • @hil2349
      @hil2349 5 หลายเดือนก่อน

      💀💀💀

  • @therealpizzadon
    @therealpizzadon 3 ปีที่แล้ว

    Hey my man. Had “At&t” come out and put a line but the previous owners had At&t devices. Do they need to install another line to the ground? They were acting shady and did not bring any paperwork. Could I send you a video.

  • @MrGew41
    @MrGew41 2 ปีที่แล้ว

    How can I connect my OA antenna to my pre- existing cable and keep the internet connection?

  • @King86james
    @King86james 2 ปีที่แล้ว +1

    How about if your Signal is too strong how do you fix that can you just get a better modem

    • @aikimike
      @aikimike  2 ปีที่แล้ว

      You could just add splitters, to weaken the signal, or have a maintenance tech from the company come fix it

  • @brooklynnicole9236
    @brooklynnicole9236 ปีที่แล้ว

    Cable dude came today (unsolicited) and he was tinkering around with my outside box and left. I'm a curious gal so I looked inside it after he left since he didn't lock it and there's a black rectangular box in there that just says AMP on it. What's this about??

    • @aikimike
      @aikimike  ปีที่แล้ว

      the amp box is to boost the cable signal in your house weird that he just showed up.

    • @brooklynnicole9236
      @brooklynnicole9236 ปีที่แล้ว

      Maybe the Feds sent him thinking I'm some dangerous spy @@aikimike

  • @thepartsrunner5758
    @thepartsrunner5758 4 ปีที่แล้ว +17

    this is unreal....absolutely nothing has been explained...nothing...this guy is lucky he found the front door to come out of to make it this far. Dude would be lucky to find his a$$ with both hands..

  • @johndecker2692
    @johndecker2692 8 หลายเดือนก่อน

    finding videos customers make them selves is just plain awesome to watch as a tech these videos are so entertaining to watch at lunch. Job security for me knowing someone will watch this and then not tell me all the fuckery that happened before I got the appointment

  • @clifford4153
    @clifford4153 4 ปีที่แล้ว +3

    This man has honeycombs on his house

    • @cryengine_x
      @cryengine_x 2 ปีที่แล้ว

      trust me same on my house. these cable boxes are apparantely magnets for them

  • @fastman696
    @fastman696 4 ปีที่แล้ว +12

    But you don't have a ground...least it's not hooked up, LOL!!!

  • @Southern612
    @Southern612 2 ปีที่แล้ว

    Can I connect my modem straight to the orange cable if my splitter doesn't work and I can't get my modem to connect?

    • @aikimike
      @aikimike  2 ปีที่แล้ว

      The cable needs to be grounded but yes you can

    • @Southern612
      @Southern612 2 ปีที่แล้ว

      @@aikimike thank you I'll try and yes I'll make sure I grounded it

  • @technologyguy2256
    @technologyguy2256 2 ปีที่แล้ว +2

    My recommendation is to see where all the wires go like from the ground block into the splitter and see where the outlets go or where the TV boxes are and just clean that up a little and also maybe redo all the wiring from the outside but don't cut off the wires that are going into the inside too like the TVs and the Internet modem maybe redo Paul that and put it in one box and then put it in one splitter something like that so it's not all those two mess if you know what I'm saying or meaning for an example you can have the ground block and then a wire going to a date way and then having it go to all your Outlets I don't know if that works by the way I'm using voice text to speech

  • @rickscully9533
    @rickscully9533 4 ปีที่แล้ว

    Quick question to you all. I have the box for cable outside my house. It only has one line coming from the box to my downstairs room. Then there is a splitter, where it hooks up to my wifi. Can I hook up my coaxial cable to that splitter to use it for my cable tv? Or, do I have to have another coaxial cable to go to another splitter for my cable tv?

    • @aikimike
      @aikimike  4 ปีที่แล้ว

      You could hook the coaxial cable to the splitter and get tv, might have problems getting all channels in well depending on signal strength. If you do a service call cable tech could charge you a fee for install, so beware. But if that is the only line coming in your house and you split it once for tv and internet that is ideal config.

  • @FunkyBananaBear
    @FunkyBananaBear 3 ปีที่แล้ว +5

    0:32 "That square", That's actually a rectangular prism, bro

  • @ferencszathmary9689
    @ferencszathmary9689 4 หลายเดือนก่อน

    Is this US?

  • @scottypitts7679
    @scottypitts7679 6 ปีที่แล้ว +17

    The most confusing part of this video is "why did you make it?". You did not show anyone how to "fix your internet cable modem".
    1. The "like a ground connector" is called a grounding block.
    2. Yours is not grounded, the wire is left dangling, which will cause worse signal than without a block all together.
    3. Grounding a Coax line has nothing to do with lightning or power surges. it has to do with dissipating the waves outside of the cable that are caught by the shielding in the coax cable. If you read the spec sheets on coax cables you will see that the only purpose of the shielding is to protect the center conductor from interference.
    4. As a former cable guy your set-up should be allot more organized than that. It would have been better if you had talked about signal loss over distance of cable and then the db drop of each splitter and how it affects the signal.
    5. I am not trying to troll you, but if you are going to write any form of "How- To" you should be allot more knowledgeable than you are. Most of the information I just gave you is from a Crutchfield Home A/V manual from 2000. This is not new information.

    • @Todd.T
      @Todd.T 6 ปีที่แล้ว

      Apparently rubber grommets to keep the moisture from migrating up the threads into the splitters and connections cost too much. TWC should be ashamed of this video.

    • @markteague8889
      @markteague8889 6 ปีที่แล้ว

      Right! With it dangling it basically acts as an antennae to pickup whatever stray electromagnetic waves might happen to be around.

    • @alexcelaya8814
      @alexcelaya8814 6 ปีที่แล้ว

      Don't forget that he also pointed at the phone pedestal lol

    • @brianleeper5737
      @brianleeper5737 6 ปีที่แล้ว +1

      As long as the coaxial cable shield is intact from the signal source to the signal receiver, it will function as designed. There is no need to connect it to earth ground (which is what a grounding block is for) for the purpose "dissipating the waves outside of the cable that are caught by the shielding in the coax cable"--connecting it to the signal source and signal receiver's internal grounds are all that is necessary, and that is done as soon as the coax is properly connected with an F, BNC, N, KS, or whatever other type connector is being used.
      It is, however, necessary to connect the coaxial cable shield to earth ground (which is usually accomplished with a ground block) because it is mandatory per National Electric Code (NEC) rules. But wait..it can't be connected to just ANY earth ground, it has to be connected to the building's earth ground, that same earth ground that connects to the electrical panel's neutral/ground bus. I've seen many old cable TV installations where a separate ground rod was driven just for the cable TV line, with the ground block connected to that separate ground rod. Those installations are not and never were compliant with NEC rules unless the separate ground rod was actually connected with a 6AWG or larger wire to the building's earth ground. Since those ground rods were always driven because it wasn't convenient to connect the ground block to the building's earth ground, of course that never happened.
      So why does the NEC mandate that the coaxial cable shield be connected to earth ground, and not just any earth ground, but the one that's connected to the building's electrical panel?
      Because the NEC aims to prevent a situation where the coaxial cable shield could be energized by a fault and present an electrocution/shock hazard. Such a fault could arise inside the building, such as a faulty TV that puts 120V on the F connector. Or outside the building, such as a broken 7.2kV primary wire falling onto the cable TV hardline and energizing it.
      Were the coaxial cable shield not grounded, then every place where the coaxial cable shield is exposed becomes a shock hazard in the event of a fault. Things like splitters and F connectors become energized with deadly voltage.
      But if the coaxial cable shield is grounded TO THE BUILDING GROUND, then there is a low-impedance path to ground which will result in one of two things happening:
      1)An overcurrent protection device (circuit breaker) will trip, which is likely in the event of a faulty TV energizing the coax shield.
      2)The coaxial cable will burn open, which is likely in the event of a broken 7.2kV primary wire energizing the hardline.
      In either case, the internal coaxial wiring is prevented from becoming energized.
      But this can only work if there is a low impedance path to ground. Simply driving a ground rod and connecting the coax to it does not provide a low-impedance path to ground. It takes a low-impedance path to ground to pass sufficient current to trip a breaker or cause a coaxial cable to burn open--and that is provided by using the building's ground, that which is connected to the building's electrical service, meter, load center, breaker panel.

    • @brianleeper5737
      @brianleeper5737 6 ปีที่แล้ว +1

      Should also mention that grounding requirements are also for fire protection. A coax shield that's energized due to a fault is as much of a fire hazard as it is a shock hazard. In the case of a 7.2kV fault, the ground block ensures that the cable will burn between the tap and the ground block, all of which is exterior to the house. If the ground block wasn't installed, that 7.2kV will find another path to ground inside the house (probably through a cable box or cable modem), almost definitely causing a fire in the process.

  • @FunkyBananaBear
    @FunkyBananaBear 3 ปีที่แล้ว +6

    3:25 Those connectors on each end of the ground block are missing their black weather grommets to protect from the water leaking in lol. Those cables wont last a year sitting outside.

    • @chrisd5758
      @chrisd5758 2 ปีที่แล้ว

      that and that ground block looks old as hell

  • @Yah_ThatsMe
    @Yah_ThatsMe ปีที่แล้ว

    Great camera quality

  • @nakayle
    @nakayle 3 ปีที่แล้ว +5

    That is really a sloppy installation with cables running around the outside of the house. One cable should go from the NID to the attic with splitter(s) and branch cabling in the attic.

    • @bogieman101
      @bogieman101 2 ปีที่แล้ว

      Or crawlspace, which I prefer. If an installer tried to pull a sloppy job like this, he would be on his way. One outside box, located at utility entry to attach to house ground. Drill hole into crawl space, mount box over hole so house cable feeds into crawlspace out of sight through back of NID (I drill hole big enough to tap plastic pipe into brick for cable to pass through. Seal with anytype of sealant. And for God's sake seal holes in NID so critters (spiders/wasps) can't get in. Makes a neat clean install.
      I would rather have splitters all in NID personally,with extra cable slack in crawlspace, but definitely not like this video.

  • @jdub099
    @jdub099 6 ปีที่แล้ว +11

    You need weatherproof fittings. and you're not grounded. that is a terrible looking install

  • @tammiegreen2524
    @tammiegreen2524 4 ปีที่แล้ว

    I'm trying to figure out why my Spectrum internet modem box won't come on and why my WiFi network won't show on any of my devices. Payment is current. The wall outlet works. When I go outside and look in that box with the cords, it looks like the green one is cut. And there is a space under the house where cords run. The panel for that entryway was open.

    • @aikimike
      @aikimike  4 ปีที่แล้ว

      Try to reboot it. You could try to do Ethernet cable to a computer to see if router is working to.

    • @tammiegreen2524
      @tammiegreen2524 4 ปีที่แล้ว

      @@aikimike
      That's not working. Spectrum worker to come out in a couple days. :-/

  • @smfknj6010
    @smfknj6010 2 ปีที่แล้ว

    Is it bad that there’s no grounding wire going to my grounding block?

  • @MrRoicecj
    @MrRoicecj 4 ปีที่แล้ว

    How is it looks like inside? I cannot see the cable outlet in our home

  • @mykkimball4018
    @mykkimball4018 4 ปีที่แล้ว

    How can you hook your satellite dish or internet back up after it gets turned off?

  • @jimflagg4009
    @jimflagg4009 2 ปีที่แล้ว

    LOL bad ground. Also nice CLI there with the disconnected cable.

  • @ReapWhatYouSowGardening
    @ReapWhatYouSowGardening 4 ปีที่แล้ว

    What is the tiny box on the house?

  • @Harrymcnani
    @Harrymcnani 5 ปีที่แล้ว +61

    As a network tech lol this guy knows nothing

    • @ryanclaflin1396
      @ryanclaflin1396 4 ปีที่แล้ว

      Seriously.

    • @yereniana1691
      @yereniana1691 4 ปีที่แล้ว +3

      As a network tech can you explain to me what what would be the problem if am not getting internet connection. We are connected but we have no signal. Fucken Cox can’t get us connected we have had about 6 to 7 tech and neither have actually done their job.

    • @Eric-the-wise
      @Eric-the-wise 4 ปีที่แล้ว +1

      @@yereniana1691 no, the internet doesn't work for you. Google it or fucking call your ISP

  • @kt6754
    @kt6754 3 ปีที่แล้ว

    My question is if you live in an apartment complex and you have the cable box and there's a splitter shouldn't it only have one cable ? There's another cable next to mine and on the other side of the splitter is the cable that belongs to the cable company. Does that mean someone in my complex is using my WiFi service?

    • @aikimike
      @aikimike  3 ปีที่แล้ว

      There should not be a splitter on in the cablebox you should have on line that goes to your apartment, another apartment might be drawing off your line, call the cable provider and ask for a audit on your cable box.

  • @notmybytch2606
    @notmybytch2606 5 ปีที่แล้ว +4

    I followed the wire until it got to the side of my neighbors house. It went into a splitter and everything but for some reason I still dont have internet.

    • @aikimike
      @aikimike  5 ปีที่แล้ว

      Find out what the splitter is connected too. Should be the tap on the pole or on the ground.

    • @j.o.7244
      @j.o.7244 4 ปีที่แล้ว +3

      The Setup 😂 he was clearly joking

    • @j.o.7244
      @j.o.7244 4 ปีที่แล้ว

      The Setup 😂 he was clearly joking

    • @CourtesyoftheD
      @CourtesyoftheD 4 ปีที่แล้ว +2

      @@aikimike he literally just told you his neighbor is stealing his cable 😂😂😂

  • @feet_exe
    @feet_exe 4 ปีที่แล้ว +2

    Lol i came to the comments as soon as he started talking

  • @brad885
    @brad885 4 ปีที่แล้ว +9

    🤣🤣 you probably have a bad drop. When it was installed, the setup was probably fine. As fittings/wire oxidize, your signal degrades. 3.5db is the loss per split, not the "magic number for your modem". Ped typically comes out 10-15 db. With a 35 return. Assuming 10db at the tap, 3db of line loss over that distance on rg6, and 9db max on the splits (3.5+5.5 for a balanced) your signal at install should be -2db with a 44db return. Well within spec. Which...means your lines are probably bad. Get a cable meter and find out though.

  • @doctorboy5892
    @doctorboy5892 4 ปีที่แล้ว +3

    No. We want to know how to fix the modem when the c**t of a optical fiber is chewed by a mouse at the actual modem?

  • @olzhasolzhas1869
    @olzhasolzhas1869 4 ปีที่แล้ว +5

    So. Were you stealing cable tv?

  • @austinfisher7697
    @austinfisher7697 5 ปีที่แล้ว +1

    In fairness to your video, if you would have gone straight to the splitter and explained that your modem should be on the 1st split dropping 3.5db this would be a solid video. and prob would help a good amount of DIY people ....but with out DSAM its all guess work

  • @FunkyBananaBear
    @FunkyBananaBear 3 ปีที่แล้ว +2

    2:46 YOO the green ground wire isn't even connected to anything lol, it's just dangling loose

  • @spinne1
    @spinne1 6 ปีที่แล้ว +9

    1) splits are irrelevant. What is important is what quality and quantity of signal gets to the modem. Sometimes you have to run signal through a few splitters to get signal strength down and return number up. The general advice of running a line from first split to modem is only true if signal supports it. Home run lines to one place is always better but rarely set up that way especially in older homes.2) ground is unhooked. (And therefore doing nothing). Has little to do with lightning. Lightning if close goes right on through and blows up your electronics ($20 surge protectors are likewise useless to stop close lightning)3) cable owns everything up to house box. Customer owns all from there in. 4). The house in this vid is a cable mess. The input on the two way is a hand-tight cable designed only for end equipment. The rest looks like trash.5). How did this vid fix cable modem?

    • @aikimike
      @aikimike  6 ปีที่แล้ว

      I agree with you on several points, this was just a walk down of system not in use, also if the signal is to high then maintenance tech needs to be notified to fix, not put a bunch of splitter to fix it.

    • @alfredozavala6669
      @alfredozavala6669 6 ปีที่แล้ว +2

      You're wrong

    • @brad885
      @brad885 4 ปีที่แล้ว

      @@aikimike nah we routinely use splitters and to get signal within spec. Been to places with signal so good you could split it 20 times and it wouldn't matter. Maintenance doesn't come out unless there's a mer/ber failure, hum on line, or docsis fail at tap.

    • @devonsykes2598
      @devonsykes2598 ปีที่แล้ว

      Splitters are very relevant. Splitters take off 3.5 to 7 db they can cause low signal or help us get it into spec

    • @imperialraiden8259
      @imperialraiden8259 9 หลายเดือนก่อน

      ​​@@aikimikeThe signal at the pole is what it is (considering there are no impairments). In some areas signal is very high and needs to be split at the house in order for it to be within standards that's just how the plant is built. And, the closer your house is to the amplifier at the pole, the higher the signal. And it has to be that way so by the time the signal hits another amplifier many many poles down, signal is good enough to amplify it again. If it's too high, Maintenance will laugh if you call in most circumstances. There are a few times when signal is too high and is messing stuff up... very rare.
      I know its an old video and late response but someone might still see this.

  • @brettharris506
    @brettharris506 4 ปีที่แล้ว +2

    Where are your CONES @ sir?

    • @brad885
      @brad885 4 ปีที่แล้ว

      😂😂😂😂😂 you OneCheck that line? This should be a meme.

  • @xMensurx
    @xMensurx ปีที่แล้ว

    plz dont touch the cables inside the omnibox. You never know if there is high amp going thru the ground wire and into the cable wire itself. You will get hurt if you are not careful and dont test it before you touch it

  • @kimihitothegreat6396
    @kimihitothegreat6396 5 ปีที่แล้ว

    question, should the box outside of the house be locked?

    • @aikimike
      @aikimike  5 ปีที่แล้ว +1

      It can be, but the junction box connected to the side of your house it is your property.

    • @kimihitothegreat6396
      @kimihitothegreat6396 5 ปีที่แล้ว

      @@aikimike wait so I can put a lock on it myself ? can it be used to hack a network or is that too difficult ? i figured if cable could be hacked why not internet, so lock the box for safety.

    • @aikimike
      @aikimike  5 ปีที่แล้ว +1

      No cannot be hacked no worries

    • @kimihitothegreat6396
      @kimihitothegreat6396 5 ปีที่แล้ว

      @@aikimike cool thanks.

  • @toddlaad1531
    @toddlaad1531 4 ปีที่แล้ว

    I need to activate a coaxe cable port that was disconnected. To reactivate that port what do I need to do?

    • @aikimike
      @aikimike  4 ปีที่แล้ว

      You can get a toner to trace the line and hook up the connection. check this video out th-cam.com/video/Fb74dPvWQeU/w-d-xo.html

  • @kennethsalyers3809
    @kennethsalyers3809 5 ปีที่แล้ว +2

    input to the 2 way one output go's to modem other leg to the other splitter then to the tv's

  • @MontanaOO7
    @MontanaOO7 ปีที่แล้ว

    isnt this what lowers ping?

  • @stunnabiggie3297
    @stunnabiggie3297 ปีที่แล้ว

    a 3 way split is a little different from a 2 way...............................................eh......

  • @pskoen
    @pskoen 3 ปีที่แล้ว +2

    Wow.
    .
    that's all I can think to say.
    Just,
    Wow.

  • @andrewmonroe8250
    @andrewmonroe8250 4 ปีที่แล้ว +1

    Sorry udder fail only.thing I agree with is for fittings to be tight I don't even install cable but I'm a contractor and I know how to this is not the way to hook cable up and the video is useless to a DIY and the cables should not run on outside either under home or at least tucked under siding

  • @ladjkaoz
    @ladjkaoz 6 ปีที่แล้ว +4

    🤔so thats how you fix your cable interner🤣😂😅😄😃😂🤣

  • @dog453679
    @dog453679 4 ปีที่แล้ว +1

    0:35, Whoah, I've seen those things at a KOA campground.

  • @duhonkjvbaptist2022
    @duhonkjvbaptist2022 3 ปีที่แล้ว

    What’s the address and account number so I can fail a QC on you?

  • @stevestewart3816
    @stevestewart3816 2 ปีที่แล้ว

    You definitely need to be grounded lol his was not even hooked up lol

  • @johnwallace2638
    @johnwallace2638 ปีที่แล้ว

    Damn it man, I need to see how the coax is wired inside the cable company's box. F at&t and their $500 bill for screwing in 8 tiny wires

  • @unknownwolf4046
    @unknownwolf4046 2 ปีที่แล้ว

    Wish cable come out rural areas 😢

  • @austinfisher7697
    @austinfisher7697 5 ปีที่แล้ว

    1st off the ped you zoomed in on is a phone Ped ...they also use cables to attatch service........what you shouldnt do is fuck with any of the Connections, Grounding or splitters found in a service Box.......in theory yes you would like the modem line to only lose 3.5db but If you dont know what your signal is to begin with then the modem is proably screaming ....to much signal, possibly a fucked up Return to go along

  • @nicholassharp8691
    @nicholassharp8691 2 ปีที่แล้ว

    I’ve been a tech for a while now. I’m starting a TH-cam channel. I’ll hook y’all up. 😉

  • @jimm8246
    @jimm8246 2 ปีที่แล้ว

    Whoever wired the box at the end with the wasp nests did a lousy job.

  • @Mrmudbone_gaming
    @Mrmudbone_gaming 3 ปีที่แล้ว +2

    Sometimes you need to reduce the signal by more than 3 dBs.

  • @azmrblack
    @azmrblack ปีที่แล้ว

    Do you realize your ground isn't connected?

  • @charliegomez842
    @charliegomez842 3 ปีที่แล้ว

    Dang someone half azked ur wires lol. I cant spell bad words so u know the saying. Sometimes splitters are need to get the frequency to where it should be. If signal is low then maybe one or 2 may be used. In other cases if it's too high and there's no splitters then either the soruce of signal (the tap) is messed up or it can be you over head line(Ariel drop) or under ground line

  • @RoyalPriesthoodMinistries
    @RoyalPriesthoodMinistries 4 ปีที่แล้ว

    All of these people commenting negatively have no life. You literally DIDN'T HAVE TO WATCH THE FUCKING VIDEO but i guess more views for him so👌

  • @Prizmatic1658
    @Prizmatic1658 4 หลายเดือนก่อน

    its not grounded, if that green wire is the ground, its not hooked up.. what an ugly sloppy install they did, the wire wrapped all around the house.

  • @mikeparker7150
    @mikeparker7150 6 ปีที่แล้ว +8

    FUCKIIIIING DUUUUUUUUUUUUMMMMMMMMB!!!!!!!!!!

  • @realreviews8540
    @realreviews8540 3 ปีที่แล้ว +1

    I fell asleep 😴

  • @markworthington5423
    @markworthington5423 4 ปีที่แล้ว +2

    this instructs how to fix....what?

  • @steratorefriends6596
    @steratorefriends6596 4 ปีที่แล้ว

    I just wanna hang out.. No Big Deal!!!

  • @firebirdgv
    @firebirdgv 4 ปีที่แล้ว +1

    Terrible video. Out of focus facing the wall and not centered to see what his talking about. The rest we got that itbwas a 3way split.

  • @Agaetis181
    @Agaetis181 3 ปีที่แล้ว

    HOW THE FK DO YOU TURN OFF THE GROUND POWER TO THE BOX!!!@!! I CANT FIND ANYTHING ON THIS OMG I'M GOING NUTS

  • @jasonmarshall4436
    @jasonmarshall4436 2 ปีที่แล้ว +1

    Hold up so ho every installed your service did a terrible job. The underground cable should have been feed to the main area. Now you have cable all over your house lol. That fence would of been easy to get that cable under even no it may of been a bit of a pain I would never do a install like that lol. Anyway this is stuff you don't need to mess with and if anything a teck would fix anything lose. I Don't think anyone learned anything hear lol. It's 2022 many of us understand. Got some old cable their. You definitely need to new boxes on your home you should never have these in those boxes. Basically the ones Comcast has that I have seen them use on mini houses are completely closed and the only part at the bottom of it is to where they can run the cable up into it

  • @vizzynar4408
    @vizzynar4408 4 ปีที่แล้ว +1

    Them lines ugly as hell my guy. Id never install something that bad

  • @devonsykes2598
    @devonsykes2598 2 ปีที่แล้ว

    It’s a tap not “the barrel” lol please don’t touch your own cable and leave it to us techs

  • @Rj-yr1br
    @Rj-yr1br 4 ปีที่แล้ว +3

    Yeah let's film something I no nothing about wtf🙄

  • @dclinks
    @dclinks 4 ปีที่แล้ว +3

    wow...that was a waste of time

  • @2u1n0n3z
    @2u1n0n3z 3 ปีที่แล้ว

    Fyi your ground is not connected

  • @soupsage
    @soupsage 4 ปีที่แล้ว +1

    lol its says how to fix ur cable modem

  • @edward2364
    @edward2364 5 ปีที่แล้ว +4

    This guy has lost half his brain 🧠 😂

    • @FunkyBananaBear
      @FunkyBananaBear 3 ปีที่แล้ว +1

      This dude was obviously let go from being a "cable man" because he fell off his ladder without a helmet lol

  • @Immortalsoul669
    @Immortalsoul669 3 ปีที่แล้ว

    Lmao yea man it goes to the house

  • @David2012V
    @David2012V 2 ปีที่แล้ว

    Braahhh do you even fence jump rofl

  • @J0hnnyrenegxde
    @J0hnnyrenegxde 4 ปีที่แล้ว +2

    this dude already outta breath the moment he reaches the box

  • @gmailcgs
    @gmailcgs 11 หลายเดือนก่อน

    Do the wasp nests come for free or is there a monthly charge for that ?

    • @williejones5559
      @williejones5559 7 หลายเดือนก่อน

      Oh believe me they come for free 🙄🙄

  • @RickGreenPhoto
    @RickGreenPhoto 5 ปีที่แล้ว +3

    i know you tube is cool but you should delete this video at least remove the wasp nest and seal that box omg

  • @lisandroquiquivixpaz729
    @lisandroquiquivixpaz729 4 ปีที่แล้ว +2

    I know who he is

    • @nolenole9502
      @nolenole9502 4 ปีที่แล้ว +3

      Lol help him PLEASE

  • @andrewharris6876
    @andrewharris6876 2 ปีที่แล้ว

    Hey jumped that gate like a girl

  • @bobf12
    @bobf12 4 ปีที่แล้ว +2

    complete waste of time.

  • @nicholassharp8691
    @nicholassharp8691 2 ปีที่แล้ว

    You have no idea what you’re talking about dude. Stop it. 🤣 struggling about the three way. This guy has maybe 3 months experience. Stay out of your house box people. You’re only allowed to touch the cables inside the home. You get caught in that house box and something is messed up your getting what we call a chargeable truck roll and the cable company does not waive the fee.

    • @jamesvw769
      @jamesvw769 2 ปีที่แล้ว

      RELAX They dont give a schitt about the taps. Often there open and exposed and they dont even care.

  • @MorrisonGrover-s3h
    @MorrisonGrover-s3h หลายเดือนก่อน

    Hall Donald Thomas Larry Robinson Gary