Very interesting video, was curious exactly how the Atmos worked. That’s one crazy looking pallet fork and what looks like a post is used for banking pins to limit the forks movement. Thank you for the video!
Really nice job on this Video. I service Atmos clocks and I enjoyed watching this. The only thing I didn't see was you poising the fork. I always do that. Maybe you did it off camera? Anyway I have been following you since your Seth Thomas videos (which I enjoyed as well!) and I am enjoying watching you grow. Well done.
Ah yes good eye, sir!! This video was shot back in August and got a new computer since then and the video file for that got lost during the migration (as did another part showing cleaning the top of the case and setting it in place).
That is most unfortunate!!! While I am currently affiliated with a repair shop, I do all Atmos repairs in my home shop due to their delicate nature and my specific setup. There's less of a chance for things to go wrong, limited interruption, and I can keep a better eye on them.
I use L&R #566, which is a non-ammoniated watch cleaning solution, as well as L&R #3 rinsing solution. I haven't had any issues with it removing any finish or lacquer as long as heat isn't involved. Thanks!!
Thank you for a great video. I have a quick question. I recently had a 528 serviced. When it came back it keeps great time, but I've noticed the protruding little wire on the top is gone. I see the one in this video has one, as did my previous newer Atmos with a calendar and moonphase. What is the purpose of the little "hair" on top, and is it wrong not to have one up there?
That is the top of the suspension spring, and it's best to leave it long on top to allow for adjustments later in case of it needing another service. I recently ran across a similar one, but not only was the top of the suspension spring cut off, so was the top of the tapered pin that holds it in place. In order to remove it, I actually had to take the entire clock apart and break the suspension spring to remove it, then replace it. But it's best practice to leave it long.
Ah yes, good eye! I shot the video quite awhile before editing/posting, and during the process of transferring video files to a new computer that portion got lost, unfortunately. I may do a separate video on just that in the near future. Thanks! 😊
Are you hopefully located in NJ ? if not can you recommend a reputable atmos service personnel in NJ. I have a 40 year old clock that is clean as a whistel but not working. I think it just needs a GOOD service cleaning like you just performed.
It's such a shame there aren't more people willing to service these clocks. If you're willing to ship, I'd be happy to service it for you! Send an email to our shop to learn more! info@lakewoodclockrepair.com
It is definitely best practice to wear gloves. I know there were some parts where I didn’t, but wearing gloves helps protect the finish of the case. Skin oils will damage the finish over time and cause blemishes. Thanks!
Excellent job!!! The clock is still running perfectly!
Glad to hear it, sir!!!
Really cool vid, makes me want to send mine from the 1960s out for a refurbish.
Very good and concise description of how to carry out this service.
Excellent video, thank you so much for such a precise informative demonstration on how to service one of these clocks! 10/10 ✅👍😊
Nice to see you Back, what a beautiful clock and well presented video I hope to see more, all the best
Thank you kindly!
Very interesting video, was curious exactly how the Atmos worked. That’s one crazy looking pallet fork and what looks like a post is used for banking pins to limit the forks movement. Thank you for the video!
Excellent video, thanks for sharing your knowledge and for your time.
What a beautiful clock!
this is amazing! i am getting a atmos because of this video
👍Wow !! what a precision in your skill
really flourishing my mind ❤
Thank you very much!
Really nice job on this Video. I service Atmos clocks and I enjoyed watching this. The only thing I didn't see was you poising the fork. I always do that. Maybe you did it off camera? Anyway I have been following you since your Seth Thomas videos (which I enjoyed as well!) and I am enjoying watching you grow. Well done.
Ah yes good eye, sir!! This video was shot back in August and got a new computer since then and the video file for that got lost during the migration (as did another part showing cleaning the top of the case and setting it in place).
Saludos necesito dar servicio a un Atmos 939 401 91 35 Constantino
Great video!
Where are you located at? How much would it cost for a full service. The clock I have is this exact clock in the video.
Send me a message via the email link on my channel, or through the Bracken ClockWorks facebook/instagram
Will do. Thank you sir.
Remarkable. Thank You.
Hola...felicitaciones ...excelente video..pregunta yo tengo un reloj igual al video ..pero atrasa mucho por dia...que puedo hacer...
Very enjoyable and informative video! 😎
Thanks! 👍
Hello. What type of Special Tool you use to remove the hands? I am looking for this tool? Thank you for your answer
Grande!!!!
Nice Seiko 6138
Good eye!! Thank you!
Do you have a shop? Most repair places discontinued repairing Atmos clocks.
That is most unfortunate!!! While I am currently affiliated with a repair shop, I do all Atmos repairs in my home shop due to their delicate nature and my specific setup. There's less of a chance for things to go wrong, limited interruption, and I can keep a better eye on them.
Great video. Which liquid do you use in the washer to protect the finish?
I use L&R #566, which is a non-ammoniated watch cleaning solution, as well as L&R #3 rinsing solution. I haven't had any issues with it removing any finish or lacquer as long as heat isn't involved. Thanks!!
Thank you for a great video. I have a quick question.
I recently had a 528 serviced. When it came back it keeps great time, but I've noticed the protruding little wire on the top is gone.
I see the one in this video has one, as did my previous newer Atmos with a calendar and moonphase.
What is the purpose of the little "hair" on top, and is it wrong not to have one up there?
That is the top of the suspension spring, and it's best to leave it long on top to allow for adjustments later in case of it needing another service. I recently ran across a similar one, but not only was the top of the suspension spring cut off, so was the top of the tapered pin that holds it in place. In order to remove it, I actually had to take the entire clock apart and break the suspension spring to remove it, then replace it. But it's best practice to leave it long.
you didn't mention poising the fork. This is the most difficult adjustment and is a frequent cause of the clock nut running.
Ah yes, good eye! I shot the video quite awhile before editing/posting, and during the process of transferring video files to a new computer that portion got lost, unfortunately. I may do a separate video on just that in the near future. Thanks! 😊
Thanks a lot for this video
Are you hopefully located in NJ ? if not can you recommend a reputable atmos service personnel in NJ. I have a 40 year old clock that is clean as a whistel but not working. I think it just needs a GOOD service cleaning like you just performed.
I am located in Cleveland, OH. And, unfortunately, I am unfamiliar with anyone in the NJ area that can help. Good luck in your search!
I have this exact clock. I cannot find anyone to repair it 😢
It's such a shame there aren't more people willing to service these clocks. If you're willing to ship, I'd be happy to service it for you! Send an email to our shop to learn more! info@lakewoodclockrepair.com
👍
I’m just wondering most of diy I see in TH-cam are wearing gloves - is this not necessary? Ty
It is definitely best practice to wear gloves. I know there were some parts where I didn’t, but wearing gloves helps protect the finish of the case. Skin oils will damage the finish over time and cause blemishes. Thanks!
I got mine for 10$