You really need to put a guard on your angle grinder. Have you ever seen one of these cutting wheels explode? I've had two explode, but because I had a guard on the grinder, the shrapnel flew forwards away from me. Hate to see anyone get injured.
You try to work with a guard on your grinder let alone in a bodyshop to do meticulous cuts, also they explode if you're unskilled. Also if you're getting shrapnel coming your way, that's also another tell that you're unskilled.
@@sixmillphill3273 I’ve never ever seen anyone use an angle grinder without a guard on it. I mean ever. Tell me one good reason why you need to remove it? Access isn’t a good reason either before you try that excuse.
Looks like a 1.4 tsi or 2.0 tsi, but not the actual scirocco R. It's just an R line. The actual scirocco R was an exhaust tip each side. Also, the standard wheels looks much better imo.
hey im here just to let you guys know, i I bought my rocco today... it is possible to achive it guys, don't give up (i am the happiest kid in da world right now) 🖤
Hey guys I have a question. How do you know that it would be better to replace an entire pannel rather than just putting on a ridiculous amount of body putty? Like what is the deciding factor?
It is easier than getting panel look good, less messy (a lot of sanding) and also less thing to go wrong, because you just replace whole panel rather than dealing with curves, getting everything flush etc. Also panel without damages gives you peace in mind that not bended metal won't rust quick in comparison to crushed and later straightened metal
A w Polsce się sprzeda jako "stan igła", "bezwypadkowy", "jak z salonu" XD Fajne efekty pracy, ale wolałbym wymienić te elementy, niż dać je komuś do wyklepania...
FOLLOW US ON INSTAGRAM instagram.com/performancerebuilds/
I love how they never shut the hatch without checking the panel gaps right after. The attention to detail is incredible throughout!
The patience you guys show reforming that fender well is awesome. Not a lot of cars get that kind of second chance....
As usual we come to expect the impossible and you guys pulled it of one sweet ride credit to you all ✌️👍🏻
This was the best salvage channel on TH-cam. Facts. And I’m a white guy
Me too, a big baldy scottish man too 😂
No time lapse, every process shown in real time. Love this channel!
You really need to put a guard on your angle grinder. Have you ever seen one of these cutting wheels explode? I've had two explode, but because I had a guard on the grinder, the shrapnel flew forwards away from me. Hate to see anyone get injured.
They just care about money not safety
You try to work with a guard on your grinder let alone in a bodyshop to do meticulous cuts, also they explode if you're unskilled. Also if you're getting shrapnel coming your way, that's also another tell that you're unskilled.
@@sixmillphill3273 I’ve never ever seen anyone use an angle grinder without a guard on it. I mean ever. Tell me one good reason why you need to remove it? Access isn’t a good reason either before you try that excuse.
@@Alexander_l322 sometimes you need space and the guard is in the way.
I really want to try this one day with some friends
This channel is under rated perfect content 💪 and perfect 15 minutes video 📸
Unbelievable workmanship, Top Job to you all! Where would we be without men 🤝
The amount of work and camera setups is really good, that's not easy keep doing the good work! 🔥💪🏻
Why have you given up TH-cam TH-cam? No videos in two years. You were doing so well.
We are back now, new video Is out. Project car video is coming soon
@@PerformanceRebuilds WOW that was good timing! Welcome back.
Sick ride, well done boys. I will be back to watch more of your videos. Gotta love the Volkswagen!
Please come back I miss this channel so much.
I so enjoy watching real proper craftsmen!
Beautiful job as always guys, great to see another video land, always a great watch. Onto the next project!
Very nice end product not just the car but the video too
Looks like a 1.4 tsi or 2.0 tsi, but not the actual scirocco R. It's just an R line. The actual scirocco R was an exhaust tip each side. Also, the standard wheels looks much better imo.
Engine cover says tdi
It's a diesel 🤡
That post in the workshop to pull from is a great idea👍
One of the best looking Volkswagen
Love watching these guys! Just brilliant
Awesome work guys really good work in turning this damaged car back to its awesome best
OMG I love this! Not just because its my favourite car right now :)
I just have one question
Will the car be as stable and safe after this rebuild? I’m just wondering
just outer skin changed
My favorite car. Wonderfull works. Bravo 👏🏻
When is the next video coming guys? Waiting for that quality upload 👊
hey im here just to let you guys know, i I bought my rocco today... it is possible to achive it guys, don't give up (i am the happiest kid in da world right now) 🖤
Another fine jobs fella's
Enjoyed that as per.
Many Thanks again.
good job.. this is not a scirocco R though.. It is R-line tdi
Sure was a lot of work in the repair (not as much as the GTR though). It turned our really well, so hopefully you made a nice profit.
Superb editing job…great cuts …etc ✅💯💰
Always look forward to your videos. For me best channel in utube. Looking forward to futures builds. Great work 👍
Thought this was an R clicted right on it, its a diesel R design good job 🚗
How did u figure out it's a diesel ?
@@bcoops2578 Because its TDI.
That was epic!!! Talented team
Beautiful work lads
Scirocco R? Since when has Scirocco R a TDI engine? 🤔
Was woundering the same, looks like tdi rline:)
it is TDI R line for England market
@@bunnatang2081 yes, we also have it in Spain
Beautiful car, great rebuild, awesome video.
Love those sciroccos - …. As well as the GWabbit ….
still waiting for a comback guys
where have you gone brother
Love these type of videos
wonderful work ethics at hand
Very satisfying video, good job guys! 👍🏻
Awesome work
Absolute dream car. Still trying to save up to buy one in a few years but sadly my current car ist eating money as if im rich 😂
Muy buen trabajo la verdad pero cuantas horas y k costaría esa reparación??
Need some new content lads! Been a while
I love the new rims u guys put on. What rims are those?
This is my dream car i hope ican buy it in future
cant wait for the next project
I hope you're well.
Awesome video and I have the same clown welding mask 👍
Perfect video nice
congratulations, friends, talk little, do a lot of work. you will come to better places
Amazing job
Where u guys gone on TH-cam
Scirocco such a cool car but i dont know if i want to buy one because the older tsi engines of VW well didnt hear so much good thinks about them .
amazing job
You are artisans
nice scirocco facelift but not a R, only Rline with TDI ;)
Gran trabajo, felicitaciones
Great job
Smashed it boys 👍
When we getting a update?????
When you guys coming back to TH-cam
Great work and effort and very good work i dont know same in your country or not in my country this car loose alot of money while saling
You're very fantastic guys... You work very well.
no way that took 10 minutes?! i cant even change my lightbulb in 10 mins!
Hello... weres evey1 gone.... I've read somewere that the garage is closed down ? The e46 m3 videos I enjoyed....
When you uploading.
Nice, but gap between fender and hood is very noticeable.
amazing
Boys your channel was so good. Why not upload
Lads when next build coming!!
So good
Came out good you guys going to sell it
Hey guys I have a question. How do you know that it would be better to replace an entire pannel rather than just putting on a ridiculous amount of body putty? Like what is the deciding factor?
It is easier than getting panel look good, less messy (a lot of sanding) and also less thing to go wrong, because you just replace whole panel rather than dealing with curves, getting everything flush etc.
Also panel without damages gives you peace in mind that not bended metal won't rust quick in comparison to crushed and later straightened metal
Where you guys disappear to?
A w Polsce się sprzeda jako "stan igła", "bezwypadkowy", "jak z salonu" XD
Fajne efekty pracy, ale wolałbym wymienić te elementy, niż dać je komuś do wyklepania...
What happened to you guys? Doing so well.
good job😍
didn't you say first video it was an r line, not r?
still great work 👍
Not an R, but an R-line
in these amendments and defects is there another solution besides using putty?
le va a sonar de todo despues
It’s a scirocco TDI? Why claim it’s an R?
Sounds better.
@@janbob5539 to each their own, even if they are wrong 🌚
It is not an VW scirocco R, its a 2.0 tdi diesel engine😅
wait... does it have a trunk latch on the back?
treeemeeeendoooooooo
Still alive you guys ?
Scirocco R? its a Normal Scirocco TDI with pack R.
Scirocco R with a TDI engine inside?
Wow you guys are like magicians . What’s the next project ?
Next project will be reveled once we have refurbished the bodyshop.
Great
How many screws, bolts, clips missing after rebuild?
We always buy spare incase clips break or we have missing bolts.
nice
But it is not an R?
Good 👌👌👌
R TDI nice…..
HADIR!