This was so interesting to watch. I am learning all things about diamonds. The 4 C's and everything else relating to the finished product. They are just beautiful.💎💍
Ohhhh, man, I could have used this video at the beginning of my career, not at the end. I always thought I appreciated our diamond setter, but now, having seen the process, I can say I didn’t appreciate him enough!
New subscriber right here! I’d love to know more about the tolls you used. I am new to this and just getting started. I’d love to hit more then one like! 👍 WELL DONE!!!!! 👍
OMG!! 😱 It takes supreme patience and skills to do this!! Wow!! Especially for the micropave… how do you make sure the tiny stones are secure without breaking it when securing the prongs?!! Wow!! I always worry my stones will fall out, which I recently have a band repaired because the stone got loose!! Luckily I caught it before losing the stone!! 🙄😅🙏
My first decent stone I cut was a 23ct Brazilian amethyst with a modified 8+8 cut and it came out beautifully. The nice big facets really let a lot of light bounce around in there 💎
This is the dream for sure! The trouble is in how time consuming it is to do properly, I don't want to half ass anything, and as a result it will take time!
Im curious why you didnt use a setting burr and used a round burr ? also do you use brute force to form the prong bead or some sort of impact tool? Beautiful results.
Setting bur just isn’t needed. Round cuts a perfect seat, arguably better than setting bur which if not drilled perfectly straight can cause stones to sit off level. And yes just by hand, I try to keep my beads size 8 or below and only hand push them.
Do you ball bur to size and then using a twist drill later, drill through the ring? Would you get nice holes on the back that way and less chance of drill through on an angle?
would love to see a video on the graver you used for the production of these beautiful cuts...what was that tool you made for countersinking the back of the ring...loved the vid! thx
I'm new to the concepts of stone setting. I'm seeing lots of debris left in the areas the diamonds will cover even with initial stones shown being placed. Is the debris completely cleaned after cutting there seats and before the actual stones are actually set?
Have a look on Ebay or your local buy and sells, there are some jewellery Facebook groups as well or sometimes engraverscafe.com people will post things for sale as well
To observe your Work of precision was truly fascinating! The extreme sharpness of your chisel, made the metal look almost as if it was made of cheese. Simply B e a u t I f u l !
This is the first diamond setting video where i could actually see whats being done. Great work 💯
This was so interesting to watch. I am learning all things about diamonds. The 4 C's and everything else relating to the finished product. They are just beautiful.💎💍
very good demo , no big jumps in steps . ( retired goldsmith , Vancouver )
Great job. I'm assuming TH-cam muted the music!
This is the first video that could actually see every step. This is cool to see and something I just gained interest in. Great video.
Well done! Greetings from italian goldsmith team😉
Very clean work❤
Thanks for sharing.
Ohhhh, man, I could have used this video at the beginning of my career, not at the end. I always thought I appreciated our diamond setter, but now, having seen the process, I can say I didn’t appreciate him enough!
New subscriber right here! I’d love to know more about the tolls you used. I am new to this and just getting started.
I’d love to hit more then one like! 👍 WELL DONE!!!!! 👍
These types of videos are so invaluable to someone like me. Thank you so much Ian!
My pleasure!
OMG!! 😱 It takes supreme patience and skills to do this!! Wow!! Especially for the micropave… how do you make sure the tiny stones are secure without breaking it when securing the prongs?!! Wow!! I always worry my stones will fall out, which I recently have a band repaired because the stone got loose!! Luckily I caught it before losing the stone!! 🙄😅🙏
Like the combined styles of bright cutting.
Thanks Ian!
Wow. That's incredible skill.
Great video on diamond 💎 setting, thank you 🙏
My first decent stone I cut was a 23ct Brazilian amethyst with a modified 8+8 cut and it came out beautifully. The nice big facets really let a lot of light bounce around in there 💎
Another great video🎉 its nice to see a little bit different setting technic.
Greetings from Antwerpen 💎
Would love to see a channel setting😊 Your work is beautiful! Thank you!
Wow! Thank you so much for sharing🙏
Wow I love your videos, thank you so much.
Thanks for this video I can learn more about jewelry
Great video, very helpful 🙏🏼
I love how you’re showing our craft but making sure you’re keeping trade secrets. Amazing work.
That’s why no one knows how the pyramids work, don’t be an information guard
nice job bro😎
Love this video, thank you for sharing ❤
Thank you!
Nice to watch the job of a profs. Should be nice if make a video how to space between the gems. Thx for the video.
Great suggestion! Ill see what I can come up with thanks
Nice seating
Well done man. You're doing great job as always. 🔥
Thank you 🙌
Love it, beautiful work
thanks was just wondering how these rings are made , found this video.
Glad I could help!
Hey ian can you do online course from the very start beginner to advanced stone setting step by step course like one after the other
This is the dream for sure! The trouble is in how time consuming it is to do properly, I don't want to half ass anything, and as a result it will take time!
"Great movie! Can you tell me what kind of tool is used for setting stones? Do you use glue for it, or does it work on vacuum? Best regards."
Hey.very jusfull video. What gravering do you use? Graversmith from grs? Any cheper alternnative maybe is?
GRACIAS PROFESOR
Good one Ian!
Thank you!
Im curious why you didnt use a setting burr and used a round burr ? also do you use brute force to form the prong bead or some sort of impact tool?
Beautiful results.
Setting bur just isn’t needed. Round cuts a perfect seat, arguably better than setting bur which if not drilled perfectly straight can cause stones to sit off level. And yes just by hand, I try to keep my beads size 8 or below and only hand push them.
Thank you it was helpful
Perfect bro. Diamonds have a strange polish. Am I right?
Hey sir what machine do you use to engrave the metal
멋지고 깔끔하네영👍🏻
Do you ball bur to size and then using a twist drill later, drill through the ring?
Would you get nice holes on the back that way and less chance of drill through on an angle?
All correct yes!
Whats the tool you used that pushed down on the prongs?
thank u master for videos
Glad you like them!
Do you use a normal rotary tool when cutting the outlines with the carver? It won’t break if you stop it from spinning?
Sir, Please tell me... Curving technique🙏
would love to see a video on the graver you used for the production of these beautiful cuts...what was that tool you made for countersinking the back of the ring...loved the vid! thx
Its just a 60 degree V
Did you use the beading tool with the graver or just with hand pressure?
Beautiful ,
Thank you!
You work with wich zoom ? 2x? 3x?
I’m such a fan of your work, and it inspires me a lot.
do you know what degree is your Onglette?
Hi, did you use the same ball bur size for the diamonds or 0,1 smaller ? Thanks
I do yes, though when getting down below 0.9 Ill calibrate them a little larger, so for a 0.7 ill get 0.68-0.72 for 1.0 I would grab 0.95-1.0
Awesome video !
Can I question something?
That tool that you use is a pulse graver??? 🙏😎👍🇨🇴
Thank you! Yes this is a pulse graver
@@setting-the-standard A pulse graver?! Is that better than a gravermax? And thanks for that lovely video!
@@fernandofernandez9354 Not better, but not worse. Different. Good tool, could use more power, but I like it
I'm new to the concepts of stone setting. I'm seeing lots of debris left in the areas the diamonds will cover even with initial stones shown being placed. Is the debris completely cleaned after cutting there seats and before the actual stones are actually set?
Most is cleaned before stones, but the remainder comes off in the ultrasonic after setting
thanks for video
How you space the diamond evenly on full ET ring
Tricky, but not too tricky, I use dividers and keep walking them around till it works out
@@setting-the-standard this and how to layout halos would be an awesome video
Why didn't you cut any seats for the diamonds?
I did, using the ball but, I just don’t cut a groove to click them into, it’s not necessary
how to make this picture at the end?
muito bom!
You’re the best
do you or anyone on here have some graving equipment for a begining they would be willing to sale. thanks so much!!!
Have a look on Ebay or your local buy and sells, there are some jewellery Facebook groups as well or sometimes engraverscafe.com people will post things for sale as well
Please tell me Th machine name's?
It would have been nice if you tracked us through what you were doing.
My online courses go through every step in a ton of detail 👌
How much is micro settings salary?
Maximum 1L
1 Liter of cola @@firozsk2649
Im sure it varys but somewhere around 70k u.s
single cut diamonds
❤
If we had finished rubover it would have been much more better.
No audio
To observe your Work of precision was truly fascinating! The extreme sharpness of your chisel, made the metal look almost as if it was made of cheese. Simply B e a u t I f u l !
This is sick to watch
Why no sound? 🥱💤