1. Use gloves ( medical) and mask because Brake parts cleaner/WD 40 are carcinogenic. 2. Use 34 mm / 36 mm socket to open clutch this method damages the nut for sure. 3.First put the belt in the drive pulley and then the variator assembly . 4. Change the oil seals and O rings . Thanks for sharing this video.❤️❤️❤️👍 From Kollam, Kerala ,India.
Superb video, without speaking a single word, explained thoroughly & for each parys of clutch related. Very nice i appreciate your efforts. Hats off to you.
The rattle sound usually comes from the clutch shoes /the end metal or aluminum area/ touching the clutch bell. This happens when the pads are bellow minimum limit The shoes must be at least 2.0mm. When new, they are 3.3mm /example for Yamaha XMax 250i/. These pads lasts at least 60000km. Cleaning the clutch will fix the problem only if you feel shaking when drive off.
Thanks, Good job, but better to use the right tools such as 38mm spanner, the clutch assembly holder; and instead of roughly scrubbing off the brake shoes, some uniform way of scrubbing up, so also the clutch bell rubbing (inserting the bell in the reverse on the shaft and rolling the tyre while holding the emry paper would do better), else keep up the good work.
hello, I have a 18-20 model honda pcx, but the cvt vibrates between 40 and 60 km, what could be the cause of the problem? Could it be from the rear movable pulley, is it because the working points of the movable pins in it make a worn gap?
why need the clutch outer drum to renew, can you explain please. ı have changed clutch pads . ı have still here the noise. ı have used drums that ı used before, cant ı use them again.
Thanks for the video but can I suggest using gloves and clean clothes or better still a parts cleaning machine much easier and thorough cleaning and degrees better than just rubbing with a oily clothes
Mere activa me piche wala clutch shoe ka nut nahi khul Raha hai .. bahut jam hai .. kaise kholu ? . Service center walo ne air gun se bahut jyada tight Kiya hai
वीडियो की शरुवात में जिस नट को खोलने के लिए आपने जिस पर हथौड़ी और छैनी मारी हैं उसको नट को खोलने का एक प्रॉपर औजार आता हैं, प्लीज खरीद लीजिये और बिना औजारों के काम मत कीजिये, ज्यादा महंगा नही आता हैं वह औजार, आप कहो तो मैं टूल्स भेज सकता हूं।
main bhi same problem face kar raha hu. same noise......service center detect nahi kar pa raha hai. vdo ki tarah service karne par problem solve hoga ? aapne result nahi dikhaya iss liye samajh nahi paa raha hu
Tik tik noise,,,u should go on narrating things: else, it becomes ineffective . U should explain what is wrong n what to be done. Lastly, after doung all this exercise, it should be shown that issue is whether fixed.
It is the sound of clutch shoe, because clutch rubber is not installed properly, i had removed the clutch rubber and the same sound was comming, and i installed the rubber then sound gone....
1. Use gloves ( medical) and mask because Brake parts cleaner/WD 40 are carcinogenic.
2. Use 34 mm / 36 mm socket to open clutch this method damages the nut for sure.
3.First put the belt in the drive pulley and then the variator assembly .
4. Change the oil seals and O rings .
Thanks for sharing this video.❤️❤️❤️👍 From Kollam, Kerala ,India.
എവിടാ ബ്രോ.. Workshop 😊
U r right
😊bro insta I'd or whtapp no indo
Oru doubt choikkan aayrnu
yeah i'd be more worried about taking those jabs mate over diy mechanics..
Which o rings n oil seal pls reply
You sir are an inspiration. God bless you. Thank you.
Superb video, without speaking a single word, explained thoroughly & for each parys of clutch related. Very nice i appreciate your efforts. Hats off to you.
The rattle sound usually comes from the clutch shoes /the end metal or aluminum area/ touching the clutch bell. This happens when the pads are bellow minimum limit The shoes must be at least 2.0mm. When new, they are 3.3mm /example for Yamaha XMax 250i/. These pads lasts at least 60000km. Cleaning the clutch will fix the problem only if you feel shaking when drive off.
बहुत अच्छी विडियो बनाई एक एक चीज बारीकी से बताई है साहब आपने बहुत कुछ जानकारी मिली
Why you can not buy one spaner for opening clutch plate?
Tss pointing out whats obvious
Definitely
Why should he buy if he can make it
Almost all mechanics are using the same primitive method
Are yaaro aam khao guthli kyo ginte ho, he is a tru mechanic, doing his job perfectly even with the limited tools.
Thanks, Good job, but better to use the right tools such as 38mm spanner, the clutch assembly holder; and instead of roughly scrubbing off the brake shoes, some uniform way of scrubbing up, so also the clutch bell rubbing (inserting the bell in the reverse on the shaft and rolling the tyre while holding the emry paper would do better), else keep up the good work.
Hiii.....
Very informative video bro 👆👌👌
Like comment mile na mile
Murgi ki awaz sunn kar lag raha hai
Anda zrur milega...😁
Good job man! Take care and try to protect yourself from job injuries
💐🥀🌷🌺🌻💮🌹🌻🍁🍂Background Music Supavvvvvvvv....Excellentttttttt🌷🌺🌻💮🌹🥀
Good skill brothers😊❤
Simple first change clutch bell if not solved then go for variator hub and rollers, simple
Thanks.. bro... very nice.....
very kind people ❤❤❤
thank you, that was just my scooters problem.
Thank you sir ❤❤❤
hello, I have a 18-20 model honda pcx, but the cvt vibrates between 40 and 60 km, what could be the cause of the problem? Could it be from the rear movable pulley, is it because the working points of the movable pins in it make a worn gap?
to solve problem which point of clutch ı should fix or renew? ı still have woice
Extremely 2good Exlant tekenecalexport explain sir you good
Good video with full details 👍
After soud he or nahi...bathaaoo yaar..may clutch pully change Kia sound nahi jaayaga
Why not cleaning those parts by diesel
why need the clutch outer drum to renew, can you explain please. ı have changed clutch pads . ı have still here the noise. ı have used drums that ı used before, cant ı use them again.
suppose to show before and after but whats the point of cleaning and re-greased but never show if the knocking sound is fixed or not.
Thanks for the video but can I suggest using gloves and clean clothes or better still a parts cleaning machine much easier and thorough cleaning and degrees better than just rubbing with a oily clothes
Didn't show whether sound gone or not
Good job❤️
Where are you making location
Thanks very usuall
Bhai activa pickups kyu Nani leti
Plz... Solutions
good video but headache inducing music
My clutch has been making this sound and its the bearings that cause it
Wheel bearings?
Mere activa me piche wala clutch shoe ka nut nahi khul Raha hai .. bahut jam hai .. kaise kholu ? . Service center walo ne air gun se bahut jyada tight Kiya hai
वीडियो की शरुवात में जिस नट को खोलने के लिए आपने जिस पर हथौड़ी और छैनी मारी हैं उसको नट को खोलने का एक प्रॉपर औजार आता हैं, प्लीज खरीद लीजिये और बिना औजारों के काम मत कीजिये, ज्यादा महंगा नही आता हैं वह औजार, आप कहो तो मैं टूल्स भेज सकता हूं।
Aap apni aukaat me raho jada Gyan mat pelo itna kaam ata hai to kyu dekh rahe ho mera video😂😂😂😂😂
Nice dada
After cleaning tick tick problem gone ah
The sound is coming from torque drive back plate. Try to knock it and you will hear the same sound that you hear when you accelerate from 0-10kmph
Nice video
No proper tools.......even I who's not a mechanic have got almost all tools to do maintenance because I own a Vespa as well.......
Tick tick sound not the problem. Now disturbs the background music
What is that spray
main bhi same problem face kar raha hu. same noise......service center detect nahi kar pa raha hai. vdo ki tarah service karne par problem solve hoga ? aapne result nahi dikhaya iss liye samajh nahi paa raha hu
Thanks
Vrygood
Why not show problem solved
perfect
Good thanks bro
Clutch shoe open& assemble need close up video please
Bhai meri Maestro edge pickup nahi le rahi hai engine pura power se accelerate karti hai par scooty bhaag nahi rahi usske compration me
Tik tik noise,,,u should go on narrating things: else, it becomes ineffective . U should explain what is wrong n what to be done. Lastly, after doung all this exercise, it should be shown that issue is whether fixed.
Moped mein machine mein awaaz aati hai kya problem ho sakti hai please bata sakte hain kya aap best video 👌👌
I’m still lost 😞
Lock milega
Muje bhi cahiye
Greasing👍🏻👍🏻👍🏻👍🏻😎
where from oil came?
👌👌👌👌
Mayujik kyu rakhte hai
Mast
❤
BHAI KHOL KE SAAF KIYA woh bhi wd40 😮 TOH KYA PROBLEM SOLVE HUA ?? Background music sucks ....
Finally start krke dikhate sound gye ki nhi
No explanation.
👍
It is the sound of clutch shoe, because clutch rubber is not installed properly, i had removed the clutch rubber and the same sound was comming, and i installed the rubber then sound gone....
I'm also facing same issue.
You are talking about this rubber at 12:29
Same problem facing
Sir may Mera bike may clutch plate change Kiya hun pair bhi gear thik say nehi pad ta hai
You don't use this tool by new on special tool.
Do not use too much grease
galing sending full support itsrichie channel
I have something like a grinding noise
சூப்பர் ஓர்க்
Mere bhi same problem hai
Same problem in my vespa
Did u solved the problem bhaiyaa
Gear box open Kia koi fayda nahi
Awaz iski nhi hai wndex girari thech ho rhi thi
Yeh kaha hoti hai ji
sound to suna
Kapda to le leta bhai garib.
NIE ZLE POTENCIAL TWORCZY
👌👍👃👃👃
Eis mechanic ko gari ka bare kuch nahi pata hai a hataowa Sai nat kholta hai
Why do not you speak
Bag shap
Why u r making this type of videos, u r not having proper tools to remove clutch.
Jhant k baal last me kon start krega
Lakh di lanat
Poor skill
Thank you so much sir
❤❤❤❤
Good video