Turning My $500 BEATER into a COMFORTABLE Daily Driver
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- In today's video, I fix a lot of problems on my 1994 Ford F-150 that I recently got back on the road in the previous video.
For more of my content, follow me on my socials!
TIKTOK: www.tiktok.com...
INSTAGRAM: / gasguzlerofficial
man, i want to live where these trucks are $500
I believe the $500 truck is a myth and only on TH-cam do they exist.
I live in Georgia and a truck here is like 1000 while the same exact truck 2 hours away in Alabama is like 400)
$
Gotta live where the average salary is 24k 😂😂
$500 truck but 😱-K in repairs and this gent had to put in an extraordinary amount of work to get to this point.
If you clean the metal where your going to weld and where your ground clamp is it will weld 100x better
Exactly. Cleaning any area you're working on makes the job(s) easier, let alone last longer/be stronger. Even applying tape.
A good impact wrench is worth it's weight in gold. This video is proof. A good friend give me an old beat up Ford Focus to drive in the winter. It was a mess. A trip to a you pull it yard, $500, and about 2 weeks worth of work, and it's like new now. I ended up liking it so much, it's become my daily driver. 35mpg, you can't beat an old Ford!
What year focus ? I got a 2013 for 2500$ and 90,000km on it (in 2019) because it has brutal hail damage, lol runs like a top but is getting rusty
I have a 2010 Focus. Rusty but Trusty. Has 130k on it and I think the factory suspension finally needs some work
I have a 1980 F100 and did the same thing, Mine was a U.S. Forrestry truck though. I would definately get a new hood and drivers fender though, even if you have to run to Wal-mart to get some rattle can paint that's close enough to pass to repaint the new ones it's still worth it. That fender being all bent up like that is going to do nothing but cause more problems and rust out the the rest of the truck as time goes on.
I have a 97 F250 and you have many similar little silly problems with my truck. This video has taught me so much, thank you!!!
@@joshtheripper7128 Glad you learned something from my videos!
25:50 that is for the fuel slosh detector that came on the econoline vans of that era because they all had the xl version of the f-series clusters
Sweet, might try to install the chip in this truck since the fuel gauge jumps around about a quarter of a tank while driving.
I was unsure how I felt about the bullet casing locks but then they grew on me. Little details like that make it YOUR truck. I hope to restore one of these at some point in my life so I’m glad I stumbled upon this channel. Cool video 👍
This is the kind of content I like! The kind of video that shows everything with tips and tricks, real knowledge and just relatable kinds of work that anyone could do. Subscriber gained! And maybe I can use some of this for my 94 Ranger or if I own an OBS Ford in the future (its pretty likely tbh)
What you did with the door locks was badass. I’m going to steal that idea.
Use rubber gloves when changing out light bulbs; they'll last longer. The dirt and oil from your fingers will cause the light bulb to heat unevenly, and it'll burn out quicker.
I must say I am impressed with your knowledge of the Ford trucks i'm 53 I've been turning wrenches for living for 40 years damn near My dad owned a shop I grew up in the shop and you are very very knowledgeable I am impressed Oh that one spot on your instrument cluster that you didn't know what was used I believe they used the same cluster in like theThunderbirds it because of the bezel ends up looking different but that was for the turbo boost light on the Super Coupes
I watch videos like this from time to time to feel manly
LOL 🤣
lmao
Well I'm quite impressed, you have a lot of knowledge and skill for a young man. I'm probably 3 times your age. I have the same truck except it's a short bed version. I got it for $800 five years ago. It needed TLC with many of the similar issues you've encountered. The good; it has zero rust. In Arizona vehicles don't rust. The bad; it had 389,000 miles and now has 405K. The 5.8 in it runs great though and doesn't appear to have ever been rebuilt. I'm subscribed now!
@@loose-arrow-garage Thanks man! I’ve always had bad luck with those 5.8L motors, but obviously they last when you take good care of them. I heard they cut a lot of corners on them from the factory, they were very restrictive airflow-wise. With a couple bolt-on parts like intake, exhaust, etc. they can perform MUCH better.
God That Welding Was Painful Lmaoo
@@cprooks When I stepped back and looked at it all together, all I said to myself was “Jesus Christ that’s terrible” 😂😂
@@GasGuzler I haven’t welded and can’t wait to butcher the first couple things I try lmao
It’s ok. The more one does anything, the better one gets. Have the courage to start.
@@GasGuzler Your welds were too cold, bump up the heat by 5-10 amps.
@@GasGuzler welder here. it was pretty obvious your wirefeed speed wasnt high enough, it happens to the best of us. as a general rule theres recommended settings inside the welder flap of the machine. its not perfect but you can use it as a baseline. mig is supposed to sound similar to frying bacon when its done correctly, also cleaning up the base material beforehand will only help. you had some free sheet metal lying around so i wouldve done a couple test runs on that before welding the tailgate. if you still wanna do better, jody on weldingtipsandtricks here on youtube has a million videos explaining how to weld. hope this helps.
Dude! I had a 1996 ext cab that I paid $2k for and drove it for 6 years. Lwb, same rims and tires and it had a topper. Took off the topper put in a toolbox and gave it a thorough cleaning. Mechanical issues were few, water pump and a new ignition switch. Every time I started thinking about selling it, I would get compliments about it from a stranger.
Beautiful work, glad to see another Ford guy take such care in work
Those era ford power steering pumps will spray out fluid if you turn the wheels while the truck isn't running
Not just FORD. I've got a 96 Dodge with a Saginaw pump and it does the same thing.
Rewire the headlights to run through relays like aftermarket lights, using the factory headlight switch as the trigger.
That way, they're not pulling all their power through the headlight switch, causing it to run hot.
😂😂😂... Those Goodyear tires are "Standard Issue " for OBS Fords...I got some on my 1993 Ford f150 5.0 truck XLT Extended cab....Had a 1994 Ford f150...Same tires on it as well...
@@ToyManFlyer1100 Yup, I see them over and over again, I’m pretty sure those were the tires they put on the trucks when they were brand new.
@@GasGuzler ... prolly right...Plus, those are the only tires I see will fit the factory originals rims...Unless you go with Aftermarket rims...Used to be under a $100.00/tire at Wallyworld...Now, 'bout a $110.00 , I think...
That slot in the gauge cluster is a handle so it doesn’t fly across the garage when angry 😂
The speedo bouncing is usually the speed sensor located in the rear differential
Cool video! I daily my 1993 F-250 with the factory turbo'd IDI and a 5 speed. Nice looking trucks!
First of all its a beater so who cares but yeah, next time you need to weld some rusty spot pass over it with a grinder (or sand paper) to get some clean metal. Will weld way easier and sturdier.
Paint, dirt, and rust all contaminate welds and weaken them.
I had a 1994 I bought almost new in 1995. I kick myself in the butt most everyday for not keeping it…. They were built like a tank compared to the new ones that are being built today!
I have a 1993 F150 XL 35k original miles. Bought as a project truck. But I did a radiator thermostat and water pump and topped off coolant and she runs too good. So I acquired a 1996 F150 that sat on my dad's farm for years. Well this one is actually a project. You've inspired me to make a video to document this adventure.
Heck yeah man, glad I could inspire you!
@@GasGuzler I love seeing guys like us bring these trucks back to life
This channel is hilarious. Good work, love the editing
Have fun. Had my first 96 for 18 years. Dug my recent 96 from two years in a field. Keep on OBS’s
I love these trucks I want a Diesel one sooo bad and I have no use for it. Just remind me of my childhood learning to drive.
Thanks for the good show.
Super cool to see someone from ct! Nice work man definitely got another subscriber!
@@zacharycalvert558 Thanks man!
And a truck from Mass! Dealer sticker says Balise which is in my home town!
those shell casing doorlocks are sick
You never drag the puddle when welding with flux core. If that is what your using? Always push the puddle if you can.
Educational video. Thanks for sharing the knowledge. I look forward to the next one.
Compared to my non-existent welding skills, those are dimes.
Put 3 inch pipe, 3 inch in 3 inch out flowmaster delta flow muffler with 3 inch tip, high flow cat
@@eliswalley6088 I honestly want to do either a 3 or 4 inch cat back straight pipe and give it a sorta diesel sound since it’s an inline 6.
No cat. High flow cats are pointless
Check that radiator support where it mounts to the frame. Replaced mine ; many rot out here. Replaced mine for about $250. Get the long bolts from the junk yard a set is $100+
@@donaldfrederick1557 So weirdly enough mine has a ton of rust especially around the mounts, but the actual structure inside of the support that bolts to the frame is completely solid. I’ll most likely replace it in the future as the tree crushed a pretty big portion of it but I’m going to run it for now.
This video is better than most of the middle aged guys trying to Derek from VGG. Keep up with it, you’re gonna make it on here for sure.
@@saldelacruz3580 Thanks man, means a lot!
I re,ember back in the. 90s when those XLT tail gates were really popular with thieves.
Just a slight correction, the C6 is actually a 4 speed auto, not 3. you have 1st, 2nd, Drive(3rd) then Overdrive(4th), just like with the AODEs, however with some shifting you could select 3rd with the AODEs. The 3 speeds ford autos you are probably think of are the C3 or C5s. To put it simply, at least for these years, if you have overdrive in a ford automatic, it's 4 a speed, if it does not, it's just a 3 speed.
Also if you have one for the 302/351, you have a transmission worth it's weight in gold (at least it's bell housing) and are extremely hard to find, just because it uses a different bell housing compared to a normal C6 for the 400/460 (and ford didn't make a lot of them for 302/351). The nice thing is the guts are mostly interchangeable.
Great work young fella.
I went full liquid nails,scrap metal and steel pop rivets with my tailgate
Love these trucks. I have had a few and my property even came with one. But dang they are not comfortable when you are tall. Your knees are pretty much just in the dash when you are trying to drive. Can't really use the blinkers. Still love em though.
@@coltonkruse2313 I’m 5’6” so it’s never really been an issue for me lol, but they’re definitely small compared to newer trucks!
“Okay dude, what the freak.”
Great job, dude! I subscribed!
Watched the whole thing. Good vid.
Try fixing the psom on the back of the speedo, there’s 2 capacitors that leak and need to be replaced, same with the ecu/ecm and can fix running issues
Loving these videos on the beater
Love that truck! Where do you find something like that for cheap? In my area (Utah) that thing would go for like 7 grand AT LEAST
@@mathisve I live up in New England, everything up here is priced ridiculously. I just happened to come across this truck on Facebook Marketplace in Massachusetts and immediately went to grab it. Every now and then you’ll find a really good deal, but I think the ridiculous prices are a normal thing no matter where you live.
Hey don’t change your 3rd break light to LED because for some reason it’s related to your transmission
I started dying when the power steering starte leaking 😆
Great Video man really love your content
@@Ford-z2w Thanks man!
@@GasGuzler No problem Ford For Lifeeee
Great video very interesting. Great old trucks.
Wow, Ford OBS, craftsman toolbox, can-do attitude! We related or something!? lol, great video! Sub’d!
@@Wood-gd9tc Thanks man!
Cool truck I had a 1993 and a 1995, also a 1984 and 1986:-). I have a 10th gen 1997 now its ok.
Anyway I live in Floridahhhh now and a truck like yours would be $5,000 here ! In the same or worse condition!
Make sure you have a good ground for welding also wire speed looked a little slow. I don’t know what you’re setting were so I can’t say exactly what.
Subscribed. Greetings from Iowa.
I had a 95 xl with 4.9 short bed best vehicle I’ve ever owned. The only thing I never understood was why does the automatic have a tach but the manual doesn’t?
The tach _probably_ comes with the automatic as a "package" deal.
Better hang on to it they don't make them good like that nowadays
Personally I think 92 and 93 are the best years for the 9th gen OBS. Because they don't have the goofy looking airbagged steering wheel.
That truck would be six figues in my country
They make a exhaust flange that’s 2 pieces that can be a quick fix for them rusted flanges
@@mitchelllawrentz766 It will still need new manifolds, the studs and nuts are severely rusted and swollen, basically unrecognizable at this point. I believe one of the manifolds are cracked too.
@@GasGuzler it doesn’t use the factory exhaust studs it just sandwiches the 2 together with its own supplied bolts
It’s called a split flange
I have a 2003 s10 I’m trying to restore but I’m broke and everything is ridiculously expensive in San Antonio TX.
You cant Turn the wheel when the trucks not runing on any old ford or it will shot the power stering cap off
What's the setting on that welder? Just a 120v welder? .030 wire? Flux or gas shielded? Just by sight, it seems like your are too cold on volts and too fast wire feed.
I only showed about a minute of the welding but I was out there for about 2 hours trying to play around with it. It’s my dad’s welder, it’s an ancient Miller I’m not sure what the specs on it are. That welder has never worked properly the whole time he’s owned it for the last 15 years though, I tried going hotter and slowing wire speed and nothing was working to make the welds stick, it wound up burning right through the tailgate but still wasn’t sticking so I just welded what I could and shot self tappers through the rest of it.
Awesome video bud!
Good stuff Sam
welds are mint
Hey I have a 1996 f150 and the bullet ideas are cool as he'll for the locks what size bullet you use ?? Thanks and the little black pice what was that ??
I used 308 shells and the black plastic parts were just the original lock knobs, I pressed them into the casings and they fit almost perfectly.
@@GasGuzler thank you I appreciate you for responding thanks
I see Connecticut, I subscribe ❤
Great video.
Subscribed and following.
Are you from Minnesota ? Just trying to guess by your voice hahaha
i have that same hat
What toolbox did you go with? Recently bought an ‘89, and it needs one
@@PatrickBest-r6o Not sure, it was one I had laying around from a truck I had years ago. There’s no branding on it anywhere.
Hey fellow Ct guy nice !
you did not bust a line if you crank the wheel while theyre off they puke fluid. my truck did it once too
Damn i want an OBS F150 so bad
awesome video
Hey am I crazy or is it weird that this F-150 has what appears to be a Dana 50 up front? I thought that was only an F-250 and up thing?
@@MarcoviousJawn Mine has the Dana 44 which is what the F-150s came with. Almost identical to the Dana 50 that the F-250s had except those were fitted for leaf springs.
@@GasGuzler thanks for the explanation, I was sitting here rewinding the video a few times thinking something didn't look right lmao
what about the hood and side panel, the side panel seriously is bent and uneven plus it loooks extremely sad,
I’ve been trying to track down a new fender for it with the same colors, it’s proven to be pretty difficult. I’ll definitely fix that in the future when I can find one.
What does the farm use plate do? If it means you don't need to register and insure your vehicle or obey the rules of the road I'm getting one!
@@danielreigada1542 I bought it off of Amazon, it’s not an actual farm plate it’s just some trend going around on TikTok, a bunch of the trucks have it and I thought it was funny to throw one on.
@@GasGuzler I figured you could just shortcut through some random field with it on : "It's a farm vehicle!"
maybe get a camper for it to do some roadtrips
Looks like my old truck
love this
how bad was the other tailgate? just use the red one if better
@@robertsmith987 Rust-wise it was way cleaner, but someone must’ve dropped something on the middle of it because it’s severely bent. Looks like a V when you open it lol
Where did you get the ford emblem for your steering wheel on that other truck
@@jerrettbrown1845 I’ll probably just make a TH-cam short about it because I get asked that constantly.
@@GasGuzler definitely do I’m really interested in that little gem for mine
why do you sound like Great Blue? (TF2 TH-camr)
a truck like that would cost 10k in canada lmao
I need that exact dash pad. You have a line on another one?
@@ericmartin4916 I have a couple more without cracks but I keep them as spares since all of my trucks have blue interiors.
Lmk if you ever want to part with one
@@ericmartin4916 Will do, where are you located? I don’t typically ship stuff I prefer local pickup just for shipping costs etc.
Franklin KY. Halfway between Nashville and Bowling Green KY
@@ericmartin4916 I’m all the way up in CT, you’re about 14 hours from me. Honestly I’d try to find a dashpad on eBay
Looks like your wire feed speed is too slow
cool
Such a nugget
What kind of work boots you got bro?
Whoever commented for you to wear gloves probably keeps a pair in their purse.
🛻🛻🛻🛻🛻🛻🛻👍🇺🇸🇺🇸
Dm you sam !
#tractorsupply @tractorsupply