When it comes to this do the following: replace the gas with fresh one, using starting fluid or carburetor cleaner is number two, number three, check the spark plug and spark plug coil...
So the motor ran with the choke closed. But when you open the choke to allow more air in, that's when the motor stalled.? And if I followed this correctly, then. it's because the jet was clogged and some debris was in the bowl.?
Yes because there is less air and with the jet clogged it still lets a small amount of fuel through the carb but when the choke is open the fuel to air ratio is way to lean
When it comes to this do the following: replace the gas with fresh one, using starting fluid or carburetor cleaner is number two, number three, check the spark plug and spark plug coil...
And also, replace oil with new one
NEVER USE ETHANOL GAS ON SMALL ENGINES
So the motor ran with the choke closed. But when you open the choke to allow more air in, that's when the motor stalled.? And if I followed this correctly, then. it's because the jet was clogged and some debris was in the bowl.?
Yes because there is less air and with the jet clogged it still lets a small amount of fuel through the carb but when the choke is open the fuel to air ratio is way to lean
My pw is different it's more nodern ryobi gcv 160 run only on choke
Sounds like it needs a carb cleaning