Yeyian Hussar mATX PC Case Review (Jonsbo D30 | Gamemax Spark) - (PC Build Vlog 5)
ฝัง
- เผยแพร่เมื่อ 21 ต.ค. 2024
- I decided to downsize my case from a Zalman p30 to a Yeyian Hussar (Jonsbo D30 | Gamemax Spark} and loved the results. I also swapped from an AMD 7800XT Hellhound to a Zotac Gaming Nvidia 4070 Ti Trinity. The CPU cooler used in this build was impressive so stay tuned for a review on the Thermalright Frozen Notte 240 AIO!
Full PC Build Plus Peripherals: pcpartpicker.c...
CPU: AMD Ryzen 7 5800X3D 3.4 GHz 8-Core Processor
CPU Cooler: Thermalright Frozen Notte ARGB 72.37 CFM Liquid CPU Cooler
Motherboard: MSI MAG B550M MORTAR MAX WIFI Micro ATX AM4 Motherboard
Memory: Corsair Vengeance RGB Pro 32 GB (2 x 16 GB) DDR4-3600 CL18 Memory
Storage: Samsung 980 Pro 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive
Video Card: Zotac GAMING Trinity OC GeForce RTX 4070 Ti 12 GB Video Card
Case: Yeyian Hussar MicroATX Mini Tower Case
Power Supply: Asus TUF Gaming 850G 850 W 80+ Gold Certified Fully Modular ATX Power Supply
Case Fan: Thermalright TL-C12C-S X3 66.17 CFM 120 mm Fans 3-Pack
Monitor: LG 34WP75C-B 34.0" 3440 x 1440 160 Hz Curved Monitor
Keyboard: Corsair K60 Pro RGB Wired Gaming Keyboard
Mouse: Corsair HARPOON RGB Wireless Optical Mouse
Headphones: Corsair HS80 MAX WIRELESS Headset
DAMN. This is like the perfect balance of small form factor while being able to fit regular sized components. Plenty of airflow and looks to be a simply assembly. I can't believe there aren't a whole lot more cases in this size!
Looks awesome. Thanks for the run down. I was considering this case for my next build and now I’m confident it’s gonna be exactly what I want
Good video but audio quality was a little harsh keep up the good work
man, zotac and evga always have the prettiest looking gpu .
How's the noise between your other case and this new one? I'm planning to buy this same case.
I will admit the cooler ramps to almost 100% during gaming to keep the cpu cool but it’s barely noticeable to me. Especially with headphones on. Wouldn’t disrupt a conversation or anything while it was running
@BigStuDolla91 I see, but you did mention that the cooler was 50$ so it's to be expected, but for me imma add the lt520 aio from deepcool, reputable brand and seems to function pretty well! anyways thanks for the reply!
Подскажите, влезут ли в него 317 мм видеокарта и 160 мм блок питания?
I believe so
Your fan config is wrong. Bottom fans and back fans should be intake and also top fans should be exhaust. The hot air tends to raise up since it’s different density than cold one. Also in order to have a negative pressure on your case aim for 2:1 ratio. 2 intakes 1 exhaust.
@@LuciaGTAVI665 my top and rear was exhaust. My bottom was intake
@@BigStuDolla91 rear should be intake too.
Is it possible to mount the PSU with the cooler side facing outside instead of inside like you installed?
You mean the fan on the psu? Probably
No, at least not with my RM1000x you can't.
There's 1 screw that's about 25mm (1 inch) from the outside of the PSU, see 2:12 (to the right of the PSU on/off switch) and that one is only on that side (facing the front of the case)
They could have made it so it was also on the 'other side' (if that makes sense) but then you'd see an extra piece of metal for supporting that screw.
So basically the only option is to use the PSU with the fan facing inward, unless you'd use an adapter with SFF PSU's. But for ATX PSU's I'm afraid it's one way only, like I said the fan facing the inside of the case, not the front of the case.
you have put you intake fans in backwards, they will be trying to exhaust air out of the bottom, (all your fans are trying to exhaust out, not are set as intakes.
@@rutabuga the bottom are reverse fans. They are intake
Is the rear fan INTAKING as well? better as an exhaust I think...
it was exhaust
I have seen some people actually put those as intake. The pc has cool air coming from the bottom to cool the graphics card so the hot air from the graphics card might actually cause the the CPU temps to increase so some people actually run jt as intake to cool the radiator
@@hwelp yup for front side psu mount with a closed front panel its best to have rear and bottom as intake and top for exhausts.
How did you manage to plug 6 fan to your motherboard ?
3 fans per header. I have 2 case fan headers and 1 cpu fan header plus a pump header
I'm eyeing for that same RGB fans from thermalright. Are they PST and can be daisy-chained?
@@rezhakusuma2449 PST? And each individual fan has bnoth an power and rgb header. The system should come with an adaptor to link them together
Yeyian Hussar mATX it fit a cpu cooler air 16,6mm?
@@ALE79-88 I would think so
@@BigStuDolla91 example cooler master ma824, can you check for me pls? or you have how to check if possible thanks
@@ALE79-88 it can fit cpu cooler up to 168mm
@@BigStuDolla91 cooler master MA-824 STEALTH can you check if fit?
@@ALE79-88 it should fit from what I’ve seen
Did you turn the AIO top around?
What do you mean?
It's upside down@@BigStuDolla91
@@AlizHalo oh possibly😂