You are the only person that I’ve seen on TH-cam that not only showed this case in black with a great build, but you also showed how you actually set up the iCUE link system. This was fantastic.
Damn, out of all the videos on this case on TH-cam, you made a really nice looking build. I love that they did away with the corner that blocked the view into the case. This looks crystal clear.
You're a PC modding machine! I noticed you have your AIO mounted with the hoses at the top. You may want to look into the best AIO orientations as this orientation is a known way to allow air bubbles in and overheat the pump.
Yeah, this was the cleanest way to do it. I might change it but i was pretty much told that as long as the pump isnt the highest point on the system i should be fine
@@BigStuDolla91 ah, that's right. I was thinking you didn't want the ends of the hose to be the highest point, but you're right, I was remembering it wrong
@mcorrive12 hey, you are correct with the cable positioning on a radiator. You want cables at the bottom because air sits at the highest point, and that means the cables where the liquid should be forced into the pump are at the highest point where the air bubble inevitably will be. It's minimal, either way is probably acceptable
I have a 4070 TI and I play on a ultrawide. Ultrawide tend to take about 10% of your performance. In Fortnite with graphics maxed out, nanite and ray-tracing off, and DLSS set to quality, I tend to max out at 160hz which is my monitors refresh rate. 144hz is usually the lowest I’d see. If you don’t have a ultrawide I think a 4070 super would be just fine
Hei man i have been watching your pc builder videos. And have some questions. 1 wich case is the best for cooling? P30, jonsbo D30 or the corsair? Before u change to New cases u say in the video that u are having some thermal problems? I was just wonddring. Because i am looking for the best m-atx case. Thx for the amswes and Great videos😎
@@judejuicegod3167 haven't finished my build yet waiting on 9800X3D to drop and next Nvidia cards. QX basically has better RGB both are good. If you want all the icue effects go with QX but RX are about $60 cheaper per 3-pack of RGB fans
I kinda want it, but I really like the 4000d. Plus I’ll be water cooling so the water block is only 3/4 size of the stock 4090 gpu. So it might look too small in this pc case
You are the only person that I’ve seen on TH-cam that not only showed this case in black with a great build, but you also showed how you actually set up the iCUE link system. This was fantastic.
Sup bro, this is Korean viewer here.
This case will be my next case. It's really cool.
Damn, out of all the videos on this case on TH-cam, you made a really nice looking build. I love that they did away with the corner that blocked the view into the case. This looks crystal clear.
Thanks man. I appreciate it
Looking to do a build with this case and discovered this very well made review, straight to the point, wish there would be more reviewers like you!
@@AkiraAkutagawa thanks. I appreciate the support
I had a hard time deciding between the white and black cases. I ended up ordering the black case.
I like the black look because it’s easier to color match parts
looks slick, im waiting for the rgb version of the case to be available over here in the UK
Hi man, great video. Question, can you hook up a 3 fan radiator (H150i) on the top of the case instead of how did it? Thanks!
@@javaRc96 yes
So torn between this case in black or white.
You're a PC modding machine!
I noticed you have your AIO mounted with the hoses at the top. You may want to look into the best AIO orientations as this orientation is a known way to allow air bubbles in and overheat the pump.
Yeah, this was the cleanest way to do it. I might change it but i was pretty much told that as long as the pump isnt the highest point on the system i should be fine
@@BigStuDolla91 ah, that's right. I was thinking you didn't want the ends of the hose to be the highest point, but you're right, I was remembering it wrong
@mcorrive12 hey, you are correct with the cable positioning on a radiator. You want cables at the bottom because air sits at the highest point, and that means the cables where the liquid should be forced into the pump are at the highest point where the air bubble inevitably will be. It's minimal, either way is probably acceptable
How much fps on fort my g? Can you make a video one it, I’m making the same build and idk if I should spend money on a 4080 super or a 4070
I have a 4070 TI and I play on a ultrawide. Ultrawide tend to take about 10% of your performance. In Fortnite with graphics maxed out, nanite and ray-tracing off, and DLSS set to quality, I tend to max out at 160hz which is my monitors refresh rate. 144hz is usually the lowest I’d see. If you don’t have a ultrawide I think a 4070 super would be just fine
i just upgraded to a 4070TI Super and im getting 160-180 fps with max settings, DLSS Quality, and no ray-tracing.
@@BigStuDolla91 they use the same gpu and the same resolution and maybe certainly ray tracing as well
i hope you remove plastice on that fan controller hub please it melt cause fire .
@@roninstormYT I didn’t but it was fine
Hei man i have been watching your pc builder videos. And have some questions. 1 wich case is the best for cooling? P30, jonsbo D30 or the corsair? Before u change to New cases u say in the video that u are having some thermal problems? I was just wonddring. Because i am looking for the best m-atx case. Thx for the amswes and Great videos😎
This corsair one has the best cooling. Most sports for fans and radiators
And thanks for watching!
Thx bro😎
just ordered the 6500X and iCue Link H150i LCD AIO and (7) QX120 fans
how is the cooling bro? im stuck between on getting the Qx or the Rx
@@judejuicegod3167 haven't finished my build yet waiting on 9800X3D to drop and next Nvidia cards. QX basically has better RGB both are good. If you want all the icue effects go with QX but RX are about $60 cheaper per 3-pack of RGB fans
I kinda want it, but I really like the 4000d. Plus I’ll be water cooling so the water block is only 3/4 size of the stock 4090 gpu. So it might look too small in this pc case
Just use a 360mm lol
@@BigStuDolla91 not sure what u mean. I’m gonna use the ek 4090 fe waterblock which is 236 ml in length.
@@drblitz3092 my bad. Misread what you said
Are you running exhaust position for the top fans?
Yes. Top and rear are exhaust. Rest are intake
@@BigStuDolla91 Looks great. Parts are on the way.
Had been 50/50 on a new build but your video pushed me into the purchase side!