What's all the rattling of the plastic pots..? What are they?.. Explain.! It doesn't make any sense to a cyclist like me who has a problem with brakes, who's trying to understand what it you are doing, without words of guidance.. 😮
Merci. J'ai regardé plusieurs vidéo sur les freins shimano mais les étriers MT200 n'ont pas de téton pour mettre une seringue, je ne comprenais pas comment faire. Au final, on ne peut purger toute l'huile, uniquement en rajouter
Great tutorial! What if I want to transfer the brake lines to other bycicle? Once I unscrewed the lines from the brake levers will the oil spill out? Thanks in advance.
do not bleed like this ! Use the yellow block and not the orange. With the orange you have a risk of putting to much liquid into the system, and in case of rising temperature (heavy braking in summer for example), the membrane compensator volume can be insuffiscient and the pression could pop up the purging screw of the lever
In the EZ bleed brake bleed kit, there is a yellow block, so you take the pads out and insert the block,also no risk of contamination of the brake pads 😁👍
Hi, I really appreciate your video, so well detailed! But I was wondering: my breaks are leaking on the pistons, I've found oil all over my rotors and the pads. Do I need to replace the whole system or just the calipers? Or maybe a break fluid bleeding would be enough (after a thorough clean as well)?? Thank you . I'm desperate to solve this problem, I haven't used my bike for months due to squealing brakes!
@@NiceBikeService thank you for replying. I was asking since the people at the bike shop had no clue, plus I'm more hands on trying to solve it myself. After all I've learnt I'm gonna bleed the system first and see if that corrects the problem, I've also sanded the rotors and pads hoping to eliminate the oil. Otherwise I will replace the callipers as a last resort before I give up! I've had a lot of patience with this bike already.. I bought it second hand and when I tried it I thought it would be a matter of bedding the pads in and the squealing would go away, but I was totally new to hydraulic brakes so I didn't know this could be such a persistent problem. Well thanks for your help and I will subscribe for sure. 👍
Vielen Dank für Ihren Kommentar! 😍 wenn dir dieses Video gefallen hat, teile dieses Video mit deinen Freunden ❤️ es wird die Entwicklung des Kanals unterstützen! 📈
the tools are already sophisticated and cheap, why are you still hitting and clamping the hose when installing the olive, it's really outdated and not quite right
@@NiceBikeService Having normal disc brakes in the front and v brakes in the rear I have experienced issues in winter time or wet with my front brakes no matter how I adjust them. In dry weather they stop on a dime. My Shimano vbrakes have never given me issues in those conditions. Now again that is my experience maybe not others.
❤ If you liked this video,
🙏 share this video with your friends
📈 it will help the development of the channel!
❓ ask your questions
Why don't u explain, how and why you are doing it😮
What's all the rattling of the plastic pots..? What are they?.. Explain.! It doesn't make any sense to a cyclist like me who has a problem with brakes, who's trying to understand what it you are doing, without words of guidance.. 😮
Merci. J'ai regardé plusieurs vidéo sur les freins shimano mais les étriers MT200 n'ont pas de téton pour mettre une seringue, je ne comprenais pas comment faire. Au final, on ne peut purger toute l'huile, uniquement en rajouter
Great tutorial! What if I want to transfer the brake lines to other bycicle? Once I unscrewed the lines from the brake levers will the oil spill out? Thanks in advance.
Дякую, дуже зрозуміло та доступно! 😊
Bedankt voor de les 👍
A mi se me sale el liquido por el empaque donde empuja el palito cuando acciona uno la leva, se consigue?
Pudiste solucionar eso??
do not bleed like this ! Use the yellow block and not the orange. With the orange you have a risk of putting to much liquid into the system, and in case of rising temperature (heavy braking in summer for example), the membrane compensator volume can be insuffiscient and the pression could pop up the purging screw of the lever
@@NiceBikeService if not the screw, the membrane can be broken. Wasn't it the original problem with your lever ?
In the EZ bleed brake bleed kit, there is a yellow block, so you take the pads out and insert the block,also no risk of contamination of the brake pads 😁👍
Why did you cut the cable? Why not just go in with the same fitment to the new brake handle?
Ustam zeytin ve kabloya giren prinç ucu hiç değiştirmeden taksak olmaz mı?
Ne yazık ki, zeytin artık sapın şeklini almayacağı ve bağlantı artık sıkı olmayacağı için yeniden takılamaz
@@NiceBikeService ben yaptım oldu, yağ kaçağı da yapmadı.
Si kup aspon ten nastrkavaci pripravek na trny do hadic misto placani necim po tom trnu paneboze :-) A bleedovani bez bleed blocku, to je maras.
Vďaka za radu ! 😘
@@NiceBikeService Jako fakt bez ironie, bleed block se dava snad ke kazdym shimano brzdam nebo v servisech se poptej.
Shimano SLX BL-M666 uses the same hose for never versions of SLX?
Yes
Hi, I really appreciate your video, so well detailed! But I was wondering: my breaks are leaking on the pistons, I've found oil all over my rotors and the pads. Do I need to replace the whole system or just the calipers? Or maybe a break fluid bleeding would be enough (after a thorough clean as well)?? Thank you . I'm desperate to solve this problem, I haven't used my bike for months due to squealing brakes!
@@NiceBikeService thank you for replying. I was asking since the people at the bike shop had no clue, plus I'm more hands on trying to solve it myself. After all I've learnt I'm gonna bleed the system first and see if that corrects the problem, I've also sanded the rotors and pads hoping to eliminate the oil. Otherwise I will replace the callipers as a last resort before I give up! I've had a lot of patience with this bike already.. I bought it second hand and when I tried it I thought it would be a matter of bedding the pads in and the squealing would go away, but I was totally new to hydraulic brakes so I didn't know this could be such a persistent problem. Well thanks for your help and I will subscribe for sure. 👍
Great video. Thank you
glad to be of service! thanks for your feedback 😘
after watching this video I think, even children's will be able to do this, the way this youtuber shown in his video.
Thank you for your feedback! 😘
Hi you need to use syring for filling
😺
Amigo, que hacer si se pierde el sellador ese de goma del tornillo?
Thank You sir
Thank you for your comment! 😍
If you liked my videos ❤️,
support the channel financially 💰🙏.
Use the "Membership" / "Sponsor" function on TH-cam ✊😘
Nice professional workshop, you just need a Brake line- Needle insertion Tool, instead of beating it in with a hammer handle ! 😂😂
Hello sir san nyo po nabilli yan ty po?
Ami me dio risa cuando le pusiste la punta dorada asi la pongo yo 😂😂
😹
muchas gracias excelente video.
What with banjo?
The olive and the fitting in these brakes will no longer be able to maintain their tightness when re-torqued, so they must be replaced
Can somebody talk us trough this 😢
we have to look at
@@NiceBikeService not really helping though... Is it..?
Link pembelian tuas rem mt201 donk
Kami memesannya di negara kami, jadi tidak ada tautan🐱
"Instrucciones detalladas"? :)
sí)
Dankeschön
Vielen Dank für Ihren Kommentar! 😍
wenn dir dieses Video gefallen hat,
teile dieses Video mit deinen Freunden ❤️
es wird die Entwicklung des Kanals unterstützen! 📈
the tools are already sophisticated and cheap, why are you still hitting and clamping the hose when installing the olive, it's really outdated and not quite right
Agreed
how mach
Why I refuse to upgrade to disc brakes including hydralic.
However, there are not too many problems with them, it is better to ride in frosty weather 😉
@@NiceBikeService Having normal disc brakes in the front and v brakes in the rear I have experienced issues in winter time or wet with my front brakes no matter how I adjust them. In dry weather they stop on a dime. My Shimano vbrakes have never given me issues in those conditions. Now again that is my experience maybe not others.
Nice...😊
⚠ ❓ ⚠
*ASK YOUR QUESTIONS*
👇👇👇
what is the Range called to open the Shimano Hydraulic Brakes Capsule
?
Can you make a video tutorial of flushing and bleeding of Logan HD-M200?
1:19 - у субтитрах невірний переклад )))
A mi se me jodio el empaque de adentro se podra hacer uno casero
@@NiceBikeService el empaque de adentro
@@NiceBikeService 😂 Rong fiting 😅 hydraulic dish vysar not
1:19 - 🤬🤣
Prx❤😊
😸
1:19
nihuya sibie blyat'
😸😸😸
سبحان الله وبحمده سبحان الله العظيم سبحان الله وبحمده سبحان الله العظيم