Golf Mk1:Vacuum Advance Pipe.

Golf Mk1: Vacuum Advance Pipe .Ensure it is connected to correct port on the Carburetor
link to full video
• GOLF MK1 WORN VACUUM A...
Visit Channel /Subscribe
/ @pjs-golfmk1-diy
TikTok Link
www.tiktok.com...
If you've received value from this channel, and it's helped you solve / fix some mechanical issues on your Mk1,(Saving you money) feel free to Donate 'as a token of thanks/support. (See PayPal link below)
www.paypal.me/...
GOLF MK1: Common issues DIY
• Golf MK1.Common Fixes ...
GOLF MK1:Gearbox, Linkages and Clutch.
• Golf Mk1 :Gearbox, Lin...
GOLF MK1 :Cooling System, DIY
• GOLF MK1 Cooling System

[@nathanjooste7323]

Can you do a video on where all the carb vacuum pipes go

[@bawar68]

I appreciate you kindness

[@zamuxolodoni8324]

Good explanation 👏 thank you a lot 🙏

[@tiegophalane649]

Can that vaccum cause the car to drive like an automatic car?

[@Earnwithdevon]

I'm enjoying and learning through your videos but I have a question,what is the difference between the distributor with vacuum and the one without vacuum?

[@east_side45]

The mechanic told me that the diaphragm in that vacuum was broken and that the other throat in the carburetor does not open because of that defective diaphragm. Can I just replace that vacuum? And are the vacuums the same on both the electronic and the distributor with platinum?

[@DeanAdams-lf6lx]

Hi pj my distributor does not have a vacuum on it and the port at the back of the carb where your pipe is in mine is open should i block that off or leave it open like that

[@jovaangoliath9741]

I also need an answer on this question and sometimes my idling go's up and down the

[@keanondelport1815]

my after market carb has 3 ports one in the middle and 2 on the sides. does it matter wich port i use? to block the 2 unused ports can i put a pipe from the one port to the other un used port to block it that way?

[@pjs-golfmk1-diy]

Sorry for late reply.
Just rather block off the ports that are not in use .the way I have blocked off mine..look at this video.th-cam.com/video/32AzX5n10MA/w-d-xo.html

[@keanondelport1815]

@@pjs-golfmk1-diy thank you. yes i did end up doing that when i bridge them the reffs just keep on climbing.

[@mlondyngcobo9516]

Hello sir I hope you are doing good.... In the aftermarket carburetor where do I plug in vacuum pipe from distributor to carburetor? Please help...

[@keanondelport1815]

@@mlondyngcobo9516 right above the air to fuel ratio screw there is 3 ports. use the middel port for your advance and block the two ports on the side off. if you dont have something to block them off with just take a small pipe bend it and cable tie it closed. thats what i did and it worked perfect.

[@pjs-golfmk1-diy]

@@mlondyngcobo9516 there are 3 ports I think at back of the aftermarket carb,..so block off two of them ,and use only one to connect to vacuum advance on distributor