Unboxing the MS070 Clone
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2017
- MS070 Power head and parts for a Husqvarna 55 complete aftermarket build, crank rod piston rings cylinder bearings seals muffler and bolts clutch drum bearing oil and fuel caps air filter carb rebuild kit fuel and oil lines and all other parts needed to do an aftermarket build.
Done this to test the performance and reliability of these Farmertec/Huztl parts.
Классная! Афигенная пила, штиль 070 я тоже о такой мечтаю! Надеюсь что скоро куплю!
Gee wiz that's a monster.
Maybe I missed something but I thought these saws came as a put together kit. The 070 is mostly together. Do they put the 070s together for you?
The first ones that Huztl offered were only assembled, they now offer a complete parts kit.
This saw is a Beast in its stock form but you can find a 090 top end kit to make it around 116cc's and turn it into Donky Kong.
I only see complete rebuild or parts kits on their site? Is there something I’m missing for the full assembled power heads?
Robby The fully assembled power head is listed in the (Outdoor Power Equipments link) and also on the (Stihl Parts link) for $398
Craig Timmons so is that still the farmertec head? I went under power head section and found the 070-090 and the other husky
+Robby Yes it is, the complete power head unit can be found in 2 or 3 places on the Huztl Web site, sometimes in the hot sales section and also in the outdoor power equipment and the stihl chainsaw parts tab, as of 12/12/17 currently listed for like $389 I believe but as of today (sold out), at a cheaper price when their on sale you'll have to check their web site every couple days to catch a sale. Hope this helps.
Seems to me that customs may have had some fun with that saw before you got it. Probably explains too why it sat so long after it shipped.
That could have been the case but generally when I receive a package that customs has opened it it taped up with tape the says Opened by US Customs.
ich bin sprachlos , sieht aus wie die deutsche Stihl " Contra " - i am speechless , look like the german Stihl " Contra "
It is a Chinese Copy of the Stihl 070/090 saws
Customs have unpacked the shipment to "inspect" your order properly. This is not the factory to be sure. Typically, customs just checking and throwing all the parts in the box again. Have seen this several times when we get samples.
Do not believe Coustoms opened this package, I am all but sure the issues were caused during shipping/transit to my address.
Other packages I have received thur Coustoms that had been opened were sealed back up with tape that stated the package had been opened by Coustoms for inspection.
@@craigtimmons3468 I got a shipment few days back... Labeled: Opened by customs - and it was a big mess, I tell you. It was re-packed by DHL. All saw chains packages were opened, they have X-Rayed the whole shipment and maybe thought this was some kind of "weapon", I don`t know. I sent a notification to the exporter about this and take it from there. By the way, are you satisfied with you chainsaw?
@@martiniracing8599 Yes I am, Only use it for the bigger stuff 30" and over but have not cut anything over about 46" on the base.
were did you get your saw and how much you pay
By watching videos of china knockoffs on guitars, Im wondering if your saw wasn't inspected at the border by customs. That would explain why it was "thrown" back in the box and also they would check the fuel and oil to make sure there is none in it for shipping (explaining the caps taken off). Either way. I love my genuine Stihl saws but I also love anything with a motor that revs and gets loud so I ain't mad at ya! Enjoy it for what it is, I'd saw a log with it!!
I really doubt this one was inspected by customs, other packages that have been inspected were taped back up with printed tape reading "package inspected by customs" and the original sealing tape cut. This package had none of that.
I too own Genuine Stihl & Husqvarna equipment. The clone saws and kits aford me the opportunity to own the bigger more expensive version that would not be economical for me to purchase and also allows for the different mods I would like to try without destroying a $1,200 to $1,800 piece of equipment.
The kit versions are fun to put together and you do not need all the special tools that some people say You must have, with just a little ingenuity and shade tree mechanicing you can put the saw kits together and be cutting firewood in just a few hours.
Sotal?
I guess they dont make these anymore bc i cant find them anywhere i keep looking at their website and cant find even an advertisement for it.
As of 06:15 am on 3/7/19 they are still shown on their web site at
www.huztl.net
In the complete saw repair kit or in the outdoor power equipment links, the latter is in blue and both are at the top of their page's
Hope this helps
@@craigtimmons3468 oh ok i did see the blue ones i was looking for the orange lol the color dont matter as much to me i guess i wasnt reading the description i was just focused on the looks of it first thanks for your help bud good vido!
thought I was watching vid on MS070 ...turns out more on parts for the 55.strange!
Yes you are partially correct, The Title states an unboxing of the MS070 which is done but if you read the Description I state in it that there is also some Husqvarna 55 parts that are unboxed.
The premise of the video was only the unboxing to show the condition of the contents after it's long trip across the big pond from China to the USA.
This was only the 2nd video I had ever shot so at this point I was in a learning curve. Literally the beginning of my TH-cam channel.
Great vid man looks like a beast of a saw how big is it? How Can I share it with my friends?
branden timmons Thanks Just click the share arrow and then select how (what media) and then who.
Good, I'm Portuguese, where to buy chainsaw?
Thank You
Sótão da mota antiga You can purchase a complete running power head like the one in this video or a complete parts kit that you need to assemble, They can be purchased at www.huztl.net
Thanks for watching.
Thank you colleague ehehe
If you want to watch my videos on my channel, Thanks
how much you payed for the saw and chain
$341 us dollars in April 2017
It is on sale today Auvg. 11 2022 for $313 usd but only in blue not orange and white.
Hello. Excuse me I watched your video which is very successful. Also I'm looking for this machine. What are your opinions after using it? and also on which site have you made your purchase? Thank you cordially
Christophe Cailleux Thanks for watching, my opinions are it is a Beast its a little over 100cc's mine has a 36" 404 pitch full chisel bar and chain and weighs around 20lbs. I use it mainly for felling and cutting anything over 36" diameter. It has gobbs of power in this form but you can convert it over to an 090 which is around 116cc's with just a piston/ cylinder swap. At 1/3 the cost of a stihl it's well worth the money. Don't run them lean on oil I run mine at 32:1 with Lucas synthetic 2 cycle oil mix.
I purchased mine from (www.huztl.net) the complete power head is on the "outdoor power equipment" tab and the complete parts kit is in the "complete chainsaw parts" tab hope this helps.
Hello. Thank you for your answer. Being French the translation is quite difficult. But I understand your answer. Also for information you bought this machine complete or in parts stain? And regarding the cutting blade guide you had this one with the machine or is it a separate purchase?
Moreover I thank you again to have answered my question and thanks again for this video explanatory as well as your other videos.
Kind regards
Christophe Cailleux Your welcome, Yes this particular saw (power head) was a complete ready to run out of the box with out a bar and chain power head, just add fuel mix I suggest a 32:1 fuel oil mix and some bar oil and a bar and chain and your ready to go cut some wood it may require some fine tuning of the carburator though to make it run perfect.
The bar and chain was purchased separately from the power head. The 36" .404 pitch bar from EBay and the .404 pitch chain was a 25ft roll from huztl that I used to spin 3 loops.
Huztl now offers a 36" bar and chain combo for this saw for about 1/3 the cost of the stihl bar I purchased, and they also offer a complete parts kit version of this saw that you will need to put together if you decide to go that way.
Right now you can purchase a complete power head and a 36" bar and chain combo for right at $400 US plus shipping but if your willing to wait they run some good sales where the price will be at a 20% to 25% discount, you will need to keep checking there web site www.huztl.net
Hope this answers your questions and good luck.
Thank you for your quick answer. I will try to follow your advice while waiting for a eventual rebate.
Thank you.
Kind regards
I just bought a neotec ns8105 _ms070came all put together they do the ship that chain and bar separate from the saw itself I ordered it and it was at my house in 2 days this is the second one that I bought from these people they're really nice any problems occur they will fix it for you one way or the other nice nice people
Ước gì e có con này
I've had a Sthil 028 Wood Boss since 1985, and I've NEVER had a problem other than a carb rebuild and ONE engine rebuild in all the years that I've had it. All my buddies say I should trade it in for a new one-- NO WAY! It's been a dependable saw, and never failed it's job. It suprises me that people are sooo cheap that they'd buy a Chinese made copy of a Sthil on e-bay and not the real deal from a local Sthil dealer in their home area. If we don't support our local small businesses we won't have any, who will fix your Chinese Sthil rip-off then?
Ok let me start here, you say you've never had any problems with your Stihl 028 Farm Boss except a carburetor rebuild and an engine rebuild, Well I don't know from what book you've been reading but my book says you've had at least 1 BIG PROBLEM an engine rebuild is a MAJOR Problem!!!! Not very dependable when it won't RUN!!!
Now I do agree with you that if it isn't broken don't fix or replace it. But if it is and it cost more than 1/2 the cost of a new one to repair then yes I agree with your buddies get a new one with a warranty you would be money ahead if you don't have the knowledge on how to do repairs yourself.
Now on to the heart of your rant, let me start here, It was not purchased from E-Bay it was purchased from (www.hutzl.net) and if you would have listened to the video and or read the description you would have known this but your just like all the other bashers you have no clue as to what your ranting about because you don't have your facts straight. You say people are sooooo cheap and you don't know why they would buy this Chinese stuff, Well let me educate you, If you want to spend $1500 US Dollars on a real Stihl powerhead so that you can try different parts and mods on only to maybe have parts broken and or destroyed then go right ahead cause you have way more money than I do. Buying one of these saws or Kits for 1/3 the cost of the real thing allows those of us who like to hop these saws up (just like a hot rod car) to do so with money left over, so if we tear it up were not out that much money. Also we buy the kit versions because we all love the challenge of putting these kits together, its like a jigsaw puzzle with no instructions, something you must not be able to do because you just want to spend all your hard earned money for something that's ready to run right out of the box from the local dealer so all the profits from this go right back to Stihl in Germany.
I've stated this fact in other replies to other comment left by other butt hurt bashers in other videos I have posted, check them out then go rid your house of all foreign made materials, then let me know how SOFT the FLOOR is, wait that Hardwood probably came from China also, looks like your sleeping on the ground now.
I'll say this one more TIME, IF Stihl, Husqvarna, Jonesred, Dollar Makita or another manufacture would OFFER one of these kits I would gladly purchase it from them, but I'm still waiting.
Your right if the local saw shop closes up because we don't purchase from them where will we have to purchase from then? It won't be my fault cause I can't afford the cost of a new Stihl saw that's 2 times over priced. If that happens then YOU won't have anyone to fix your real Stihl saw that you've had no problems with, except a carburetor rebuild and an engine rebuild, and I'll continue to fix my own stuff. If you want to bash someone for the lost jobs and all the Chinese goods start with your self and stop going to WalMart now who's the Hypocrite? Please let me know where you dump all of your Chinese junk. One more question for you, Where do you think Stihl Saws came from before they were made here in The USA? Answer: A Country (Germany) that Americans rebuilt after we destroyed it in WWII. Not much difference between that then and China now. Think about it . look at Japan also same deal.
Have a Great Day
ive had my stihl ms460 for almost 20 years and ive only ever had to have a clutch put on it and was used commercially until i stopped cutting timber, but i have also seen stihl saws not survive a month they would get a hole burnt in the piston but id say that was more operater error ive always found it better to add a lil more oil to gas then it calls for. not bashing either i own a chinese yamaha rhino clone that i wouldnt trade for a yamaha rhino, and come on we all know it doesnt matter where its made you can get a piece of junk from anyplace or you can get the best piece of equioment you have ever owned its all a chance! lol
Only fabor were you order
And how much you pay
Can someone explain me why someone buy that saw? It is stihl old technology and why are Chinese copy that?
Another throw away saw. I would throw it away after this video
Contrary to what you have been led to believe this saw is now 2 years old and still running very strong and very dependable, the only issues this saw has had was new out of the box, is the cone used for clutch engagement to the crank was not tight enough and at around 1 1/2 years the fuel line needed replaced.
In my opinion for 1/3 the cost of the real thing this has been money well spent.
Don't be led to believe everything your told or hear. Sometimes it's just not the case.
Either way.. stolen technology.
hi
were did you get you chain saw from im from usa
Tim Bolt As far as I am aware these saws can only be purchased from www.huztl.net out of China as of 5/16/2018 the cost is $358.20 us dollars for the complete power head or you can opt for a complete parts kit that you assemble for 178.40 us dollars. If you watch their web site you can catch more sales and free shipping at times through out the year.
Were can I get one from
You can find this direct form farmertec.com
hlsproparts.com
Or if you look on face book on the Farmertec Chainsaw Fans & Builders Group you can find factory direct supplier in a multitude of different USA States and Countries.
@@craigtimmons3468 thanks
I cant stop looking at the pile of dig shit in the yard
that saw has no AV, just like your video lol
Heck I've heard most Stihl parts now are From China
Yes it is it's almost 106cc's kinda like having a Honda 125cc dirt bike engine with a bar and chain on it to cut wood.
helo were can i buy chain saw like yours 070 copy
Farmertec.com or search for a local dealer that sells the Farmertec saws.
Check out Framertec on Facebook.
ESSE O70 NAO VENDE NO BRASIL
Sorry to hear that.🥺
Price please ?
Check www.farmertec.com for price.
I have ordered three different chainsaws company in China have not received any saws it has been months since I ordered them they just keeps calling me saying they sent it but they haven't they did send me a little girls t-shirt but that was for mistake they said they got fouled up and didn't send I saw as they just make one at one excuse after the other I don't trust China much anymore thank you for listening to this I appreciate it
Don't know which companies you have ordered from, I've placed many orders with Farmertec thru their web site and have always received my orders. Now with this being said there were a few that took 3 to four months to receive due to shipping methods and sometimes when shipped by boat once on the boat you will not get any further updates until it is received into customs (here in the US) and that can make it appear like nothing is happening with your order.
Best of luck and I hope you receive your orders.
It sounds like you would have been better buying the Stihl, or Husqvarna instead because they would have come assembled except for the bar and chain.
At almost 4 times less than the cost of an equal size Stihl it allows someone with the know how and ability to try all sorts of mods to the saw and still be less than half the cost of a Stihl Power Head. These mods include different size pitch bars and chains.
To the purist I know they are total junk, but to someone who likes to try different mods without breaking the bank this is the way to go.
When I purchased this power head (assembled) there wasn't a complete parts kit available at that time like there is now.
Get it cheap on e bay
Wonder how much money Stihl is loosing or making off of China making the 070 and the 090
Stihl is not making or loosing any money over the sales of the 070 and maybe the 090 version (not sure it is being produced ) here in the states because these versions are not available for purchase from Stihl in the USA New.
Ok
Felix Corpuz ช้าง
7000 miles for a counterfeit chainsaw? No thanks.
Ya Get what you pay for.
Its Been almost 2 years now, I've used this saw a few dozen times now and with the exceptions of the clutch not being tightened enough from Huztl and the fuel line deteriorating and cracking and the high idle button breaking and the air filter not sealing properly this saw has started and run flawlessly each and every time I've used it, if you don't mind fixing the little issues then
At less than 1/3 the cost of a Stihl counterpart I Will say it was a good investment, money well spent.
Say what you want I know it's not a Real Stihl and I never put it off to be, but in the end it starts, runs and cuts wood when I need it to and that is all that really matters to me.
দাম কত হবে
bbr
รศสดออก
,,รถ/ ี
I believe that the chainsaw has been made at the factory by industrious Chinese, than in Germany by illiterate lazy emigrants.
I know what I'm talking about. I have a trimmer and a chainsaw assembled in the USA. The fastener is not tight, the snot is made of sealant. The wires are hanging. (husqvarna 137, 125R, 125C) :P
The only thing that's clone of a stihl is the color those things are junk plus it weigh in at 25 pounds
Why why why, it’s like buying counterfeit drugs on line, why ? Would I give it to my employees to use ? No
Online?
Cool story bro... no thanks.